1Mii ML301 Transmitter and Receiver 2-in-1 User Manual
- June 5, 2024
- 1Mii
Table of Contents
1Mii ML301 Transmitter and Receiver 2-in-1
IN The Box
Product Overview
TX MODE
RX MODE
Control Functions
Connect ML301 to device with 3.5mm audio cable. 2.Slide mode switch to “TX/ RT
side 3.Adapter will auto-enter pairing mode. set your device to pairing mode.
Wait, they will pair and Connected. Pair with the second device Set second
device to pairing mode. Set ML301 to pairing mode again, hold the bluetooth
button for 2s until the LED flashes Blue and Red. Wait until connected.
Warnings
Warranty service is limited to normal use only. Any man-made damages such as connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, damages by misusing the product, careless use of the equipment, or improper installation,.repairs and adjustments not approved by the company as well as damages that did not occur during shipping may cause the warranty to be ineffective immediately This warranty does not include shipping fees.
Disposal
Always dispose of the used appliance at a recycling centre. Do not dispose the used appliance together with household waste.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>