TAKSTAR TS-3310UH Wireless Microphone User Manual

: June 5, 2024
: TAKSTAR

Table of Contents

Preface
Features
Package Contents
Applications
Specifications
Function Descriptions
Operation Instructions
Safety Instructions
Troubleshooting
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**TS-3310UH
Wireless Microphone
User Manual

http://weixin.qq.com/r/REOwqJLEvs-BrdbL9xZW
**

Preface

Dear Customer,
Thank you for purchasing Takstar TS-3310UH Wireless Microphone. In order to better understand and use the product, please read this manual carefully. If you have any questions or suggestions, please contact our local dealer.

Features

High-performance UHF integrated circuit, multiple frequency channels selectable, better stability and nook coverage
Special channel ID code (tone-key) function effectively prevents crosstalk
Intuitive work status overview on LCD display
One-key scan function on receiver automatically finds the best available channel
IR sync to easily sync transmitter and receiver in one easy press
Independent balanced XLR and unbalanced 6.3 combo output

Package Contents

TS-3310UH Receiver…………………………… 1 pc
Audio Output Cable……………………….1 pc
Power Adapter……………………………….1 pc
Handheld Microphone…………………..2 pcs
AA Battery……………………………………4 pcs
Mic Anti-Roll Ring………………………2 pcs
User Manual………………………………..1 pc

Applications

Classroom, KTV, conference, family entertainment and outdoor performance

Specifications

Receiver

Frequency Range: 470-932MHz (segmented)
Frequency Stability: ± lOppm
Sensitivity: lOdBuV
Adjacent Channel Rejection: 65dB
Image Frequency Rejection: 75dB
Audio Output: 200mV
Output Impedance: XLR connector: 200Q; 1/4″ connector: 1K
S/N Ratio: 100dB
Distortion: <0.1%
Frequency Response: 50Hz-18KHz
Receiving Distance: 100 (m)
Function Display: LCD
Power Supply: DC ****12V
Dimension: 48249044mm
Weight: approx. 4650g
Material: iron case, aluminum panel

Transmitter

Frequency Range: 470-932MHz (segmented)
Frequency Stability:± lOppm
Transmit Power: 10mW
Receiving Distance: 100 (m)
Harmonic Suppression: >65dB
Modulation: FM
Max Modulation Degree: 75K
Operating Voltage: 3V
Operating Current: 120mA
Function Display: LCD

Note: The above data is measured by Takstar laboratory.

Function Descriptions

Receiver Front Panel

Function Button: used to select a channel, adjust/sync/scan frequency, etc.
LCD Display: displays sync status, frequency, received signal level, etc.
IR Sync Window: sends frequency parameters to the transmitter, used in conjunction with the [SET] button.
Power Switch: controls receiver power supply.

Receiver Rear Panel

Antenna: A/B antenna.
Audio Balanced Output: XLR type socket, provides independent signal output for each channel.
Mixed Audio Output: mixes audio signals of both channels into one output.
Power Socket: connects to DC 12V power supply; the center electrode connects to positive voltage.

LCD Display

RF Indicator: displays the received signal strength.
AF Indicator: displays the audio signal strength.
FREQUENCY: displays the operating frequency.
G: displays the default group.
CH: displays the default channel.

Handheld Transmitter

Mic Grille & Capsule: the mic grille protects the capsule which converts sound into an electrical signal, and prevents the mic from rolling on the table.
Display Screen: shows information such as operating frequency and battery power.
Power Switch: for turning on/off the transmitter power.
Mic Body: assembles the grille and capsule on the top, houses the battery and transmitting circuit board inside, and includes an internal transmitting antenna at the bottom.
IR Sync Window: receives frequency parameters from the receiver, used in conjunction with the [SET] button on the receiver. (placed on mic body behind screw cover).
Battery Compartment: for loading 2pcs AA batteries (please observe the polarity of battery placement).

Operation Instructions

Adjust Frequency Manually
On the home screen, short press [SET] button twice, then short press [▲] or [▼] of the corresponding channel to adjust its operating frequency to desired, and stop pressing until the frequency stops blinking. Next, turn on the transmitter power, align both IR windows of the transmitter and the receiver (at 10~30cm distance), and short press [SET] to start syncing, in which case the screen will display the IR interface, and subsequently the syncing process as shown in below figure. Once synced, the frequencies shown on the receiver and the transmitter should be the same. Retry by short pressing [SET] again if it fails to sync.
IR Sync
On the home screen after selecting a desired operating channel, turn on the transmitter power, align both IR windows of the transmitter and the receiver (at 10~30cm distance), and short press [SET] to start syncing, in which case the screen will display the IR interface and subsequently the syncing process as shown in below figure. Once synced, the frequencies shown on the receiver and the transmitter should be the same. Retry by short pressing [SET] again if it fails to sync.
Adjust Frequency Numbering
On home screen, short press [SET] button three times, then short press [ ▲] or [▼] of the corresponding channel to adjust the frequency number to desired (selectable from 1~14), and press [SET] to confirm.
Auto Scan
On home screen, short press [SET] button four times, then short press [▲] or [▼] of a channel to start an automatic frequency scan for the corresponding channel. The frequency on the screen keeps changing until it finds a clean frequency. Next, turn on the transmitter power, align both IR windows of the transmitter and the receiver (at 10~30cm distance) and short press [SET] to start syncing.
(Note: when using multiple sets together, keep the already-paired transmitters on while performing auto scan on the next receiver set.)
Adjust Volume
On home screen, short press [ ▲] or [▼] of the corresponding channel to adjust its volume level (31 levels in total).

Safety Instructions

To avoid electric shock, overheating, fire, radiation, explosion, mechanical risk, and injury or property loss due to improper use, please read and observe the following items before use:

Please check if the power of the connected equipment matches that of this product before operation. Adjust the volume to the proper level during operation. Do not operate at overpowering or high-volume levels for an extended time to avoid product malfunction or hearing impairment.
If there is any abnormality during use (e.g. smoke, strange odor), please kill the power switch and unplug from the power source, then send the product to the local dealer for repair.
Never use any replacement battery with broken insulation. Do not charge the non-chargeable battery.
Dispose of waste batteries in a designated dustbin for sorting. Do not use them as children’s toys nor discard them directly to avoid health risks or environmental damage.
Keep this product and its accessories in a dry and ventilated area. Do not store in a humid or dusty area for an extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing, vibrating, or from blocking any ventilation openings, to prevent malfunction.
The product must, if applicable, be fixed firmly in place if installed on walls or ceilings at adequate strength to prevent from falling.
Please abide by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accident.
Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local dealer.

Troubleshooting

Issue	Cause
No response on transmitter or receiver screen.	Transmitter battery is dead;

the receiver power supply is not properly connected.
No RF signal on receiver.| Different frequency between transmitter and receiver; or out of effective range.
Has RF signal but noAF.| Transmitter mic is not connected.
Loud background noise in the audio signal.| Low output level on the receiver; there is interference signal; receiver antennas are not installed, lowering the S/N ratio.
Audio signal distortion.| Speak too close to the transmitter mic. Receiver output level is too high.
Short operating distance, unstable signal.| Receiver antennas are not properly installed, or there is strong electromagnetic interference around.

Scan for more product information
http://www.takstar.com/

: 400 6828 333 :
: 0752 6383950
xs@takstar.com
: www.takstar.com
Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang YiRd., Longxi Boluo
Huizhou, Guangdong 516121 China
Tel: 86 752 6383644 Fax: 86 752 6383952
Email: sales@takstar.com
Website: www.takstar.com