camry CR 2169 LED Bathroom Mirror User Manual
- June 5, 2024
- camry
Table of Contents
camry CR 2169 LED Bathroom Mirror
INSTALLATION
SAFETY CONDITIONS
PLEASE READ IT CAREFULLY AND KEEP IT FOR FUTURE REFERENCE
- Read the instruction manual before using the device and follow the instructions contained in it. The manufacturer is not liable for damage caused by using the device against its intended use or improper handling.
- The device is intended for home use only. Do not use for other purposes that are not in accordance with its intended use.
- Take special attention when using the device when children are nearby. Do not allow children to play with the device, do not let children or persons not familiar with the device use it.
- WARNING: This equipment may be used by children over 8 years of age and persons who have no experience or knowledge of the equipment if this is done under the supervision of a person responsible for their safety or have been given instructions on the safe use of the device and are aware of the danger involved with its use. Children should not play with the equipment. Cleaning and maintenance of the device should not be performed by children unless they are over 8 years of age and are supervised.
- Do not immerse the device in water or any other liquid. Do not expose the device to atmospheric conditions (rain, sun, etc.).
- Do not use a device that is damaged in any way or works incorrectly. Do not repair the device yourself. Please return the defective device to the appropriate service center for inspection or repair. All repairs may only be carried out by authorized service points. The incorrectly performed repair can cause serious danger to the user.
- Do not use the device near flammable materials.
- Do not handle the device with wet hands.
- Batteries may leak if they are exhausted or have not been used for a long time. To protect your device and your health, replace it regularly and avoid skin contact with leaking batteries.
PRODUCT DESCRIPTION
- Battery cover
- Lighting switch
- Suction cup base
- Suction cup tab
OPERATION
- Remove the battery’s cover (1) from the back of the unit, and insert alkaline batteries properly: 3 pieces AAA in AD2168 or 3 pieces AA in CR2169. Ensure the batteries are fitted the right way round observing the + and- signs on the battery and the product.
- Clean the surface on which the mirror will be installed. The surface should be dust-free and grease-free.
- Firmly press the suction cup onto the desired position. Suction works on tiles, glass, ceramic, marble and most other flat surfaces.
- Press the lighting switch (2) to adjust the brightness of the light, the first time press the switch, the light is the brightest, the second time press the switch, the light becomes weak, press the switch again, turn off the light.
- Gently turn the suction cup base (3) clockwise until you hear a clicking sound, the LED mirror is well assembled.
- Rotate the mirror to your desired angle.
- In order to disassemble, pull the suction cup tab (4) while supporting the mirror so that it does not fall.
CLEANING AND MAINTENANCE
- Keep the mirror out of the reach of the small children as far as possible, please take care of the children when they use it.
- Keep the item in a cool dry place, do not touch it with wet hands.
- Regularly check if the suction cup still attached to the wall or on the table.
- Wipe the mirror with a dry, soft cloth.
- Do not use chemicals, cleaning solvents or strong detergents to clean the device.
- Do not attempt to disassemble the mirror, if there is any defect.
Important safety information
This information applies to products that use disposable batteries. Incorrect
use of the battery may cause electrolyte leakage, overheating or explosion.
Released electrolyte is a source of corrosion and can be toxic. May cause
burns to the skin and eyes; it is also harmful if swallowed. To reduce the
risk of injury:
- Keep batteries out of the reach of children.
- The battery should not be heated, opened, punctured, destroyed or disposed of in fire, and should not be inserted in the opposite way into the device. Particular attention should be paid to the designation [+] and [-].
- Do not mix old and new batteries or batteries of different types (for example, zinc and carbon).
- Do not touch the terminals of the battery in the device with metal objects. These elements can become hot and cause burns.
- Remove the batteries if the batteries are used up or if the device is to be stored for a long period of time.
- Remove old or worn-out batteries from the device and dispose of for recycling or recycling in accordance with national waste disposal regulations.
- In the event of battery leakage, remove all batteries, avoiding contact of leaking electrolyte with skin or clothing. If the battery electrolyte comes into contact with skin or clothing, immediately wash it with water. Before inserting new batteries, thoroughly clean the battery compartment with a damp paper towel.
Note: Replacing the battery with an incorrect type of battery may cause
an explosion.
Use only batteries of the same size and type (alkaline, zinc-carbon, zinc-
chloride or nickel-metal-hydride). Do not recharge ordinary batteries.
Chemical composition of the used battery or accumulator: alkaline (zinc-
manganese) How to change the battery: open the container, and insert/remove
used batteries. To properly insert new batteries, special attention should be
paid to the polarity (+) plus and (-). Inside the battery container or in its
vicinity there is a graphic symbol that illustrates how to properly place the
batteries in the container, then close the battery compartment.
Technical data:
IPX4
Power supply:
AD2168: 3 x AAA battery (1,5V) / CR2169: 3 x AA battery (1,5V) To protect your
environment: please separate carton boxes and plastic bags and dispose of them
in corresponding waste bins. The used appliance should be delivered to the
dedicated collecting points due to hazardous components, which may affect the
environment. Do not dispose of this appliance in the common waste bin.