KASTA SL02AB-BH Smart Daylight Sensor Instruction Manual
- June 5, 2024
- KASTA
Table of Contents
KASTA SL02AB-BH Smart Daylight Sensor
Installation Instructions
Smart Daylight Sensor
Product Code: SL02AB-BH
APP Installation
Visit www.kasta.com.au or your app store to
download the free KASTA app.
iOS: requires iOS 9.0 or later.
Android: requires Android 4.4 or later. Devices must support Bluetooth
4.0
Important Safety Informatioin
- this product must be installed by a licensed electrician in accordance with all the require ments of AS/NZS 3000 (current edition) and other relevant Standards and Regulations.
- Electricity MUST be disconnected prior to installation. Failure to do so may result in serious injury and or loss of life.
- Indoor use only. Not suitable for damp or explosive environments.
- Complies to Australian Standards AS/NZS 60950.1:2015, AS/NZS CISPR 15.
- No user serviceable parts inside.
FEATURES
- The light Sensor module is set up via the KASTA APP.
- Enable / Disable Automatic Daylight Harvesting Mode.
- When Disabled: Manual Dimming Up/Down using KASTA APP.
- When Enabled: Can adjust Dimming Profile and Target Light Level via KASTA APP.
- Measures ambient light intensity.
TECHNICAL SPECIFICATIONS
- Operating Temp: -20ºc to 50ºc
- Operating Frequency: 2.4Ghz
- Supply: 220-240V~50/60Hz
- Detection Angle: 45º
- IP Rating: IP65
- Dimensions: 125x51x44mm
- Maximum Number of KASTA 1-10V Dimmers Per Sensor: 10
CONNECTION DIAGRAM
kasta.com.au
(02) 9168 5900
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>