KASTA RSIBH Smart Remote Switch Input Module Instruction Manual
- June 5, 2024
- KASTA
Table of Contents
KASTA RSIBH Smart Remote Switch Input Module Instruction Manual
Important Safety Information
- This product must be installed by a licensed electrician in accordance with all the require ments of AS/NZS 3000 (current edition) and other relevant Standards and Regulations.
- Electricity MUST be disconnected prior to installation. Failure to do so may result in serious injury and or loss of life.
- Indoor use only. Not suitable for damp or explosive environments.
- Complies to Australian Standards AS/NZS 60950.1:2015, AS/NZS CISPR 15.
- No user serviceable parts inside.
FEATURES
-
Mains powered remote switch input module.
-
Communicate with and control other KASTA devices.
-
Simple 4 wire connection – A, N, S1, S2.
-
2 modes of operation.
Mode 1: INPUT MODULE
Wirelessly control KASTA devices, groups and scenes when a toggle/latching input such as a PIR sensor is activated. Install in conjunction with a device (e.g. PIR sensor) to S1 terminal for remote control of KASTA devices.
Mode 1: INPUT MODULE
Wirelessly control KASTA Devices, Groups and Scenes from short press or long press of momentary switch mechanism. Install in conjunction with an appropriately rated mo mentary action mechanism to S2 terminal. -
Can be paired with KASTA remote switches for multi-way control (8x maximum).
-
Smart functions via phone/tablet with the app such as schedules, timers, scenes and groups.
-
Built in overvoltage protection.
-
To prevent a reduction in Bluetooth signal strength, install away from metal objects.
FUNCTION SETUP
S1 CONNECTION
PIR sensor output is transferred to KASTA BLE paired devices for on/off
function.
S2 CONNECTION
ON/OFF SWITCH: 1 CLICK
Turns lights on or off. When turned ON, lights will adjust to previous
brightness.
DIM UP/DOWN: ONE LONG PRESS
When lights are on, long press button to dim up or down. Release button to
stop.
FULL BRIGHTNESS: 2 CLICKS
Sets lights to full brightness.
DELAY TO OFF: 3 CLICKS
Lights automatically turn off after set time.
SET MIN DIM LEVEL: 4 CLICKS
Dim to desired level. Click button 4 times to store setting.
RESET MIN DIM LEVEL: 5 CLICKS*
Restores back to factory minimum dimming level.
PAIRING MODE: 6 CLICKS
Enter pairing mode for multi-way dimming. Lights will pulse.
FACTORY RESET: 9 CLICKS
Restores all settings back to factory.
If successful, light will pulse the number of times that the switch was
clicked, indicating function.
APP Installation
Visit www.kasta.com.au or your app store to
download the free KASTA app.
iOS: requires iOS 9.0 or later.
Android: requires Android 4.4 or later.
Devices must support Bluetooth 4.0
APP ENABLED FUNCTION
RETRIGGER TIMER: 1 CLICK
Enable delay to on/off. Function must be programmed through app first.
TECHNICAL SPECIFICATIONS
Operating Temp: -20ºc to 40ºc
Supply: 220-240V AC 50Hz
CONNECTION DIAGRAM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>