KASTA KBSKTD350 Smart Single Surface Socket Dimmer Instruction Manual
- June 5, 2024
- KASTA
Table of Contents
KASTA KBSKTD350 Smart Single Surface Socket Dimmer
Product Code: KBSKTD350
APP Installation
Visit www.kasta.com.au or your app store to
download the free KASTA app. iOS: requires iOS 9.0 or later.
Android: requires Android 4.4 or later. Devices must support Bluetooth 4.0
Important Safety Information
- This product must be installed by a licensed electrician in accordance with all the requirements of AS/NZS 3000 (current edition) and other relevant Standards and Regulations.
- Electricity MUST be disconnected prior to installation. Failure to do so may result in serious injury and or loss of life.
- Indoor use only. Not suitable for damp or explosive environments.
- Complies to Australian Standards AS/NZS 60950.1:2015, AS/NZS CISPR 15.
- No user-serviceable parts inside.
FEATURES
- Suit loads with a standard 2 or 3-pin plug.
- Load control button and LED status indicator.
- Rear load output terminal for wiring to additional traditional surface sockets downstream in the circuit (up to maximum load rating of the KASTA surface socket dimmer).
- Simple 5 wire connection – A, N, E, Load, Loop.
- Pair with KASTA remote switch devices for control (up to 8x maximum).
- Smart functions programmed via phone/tablet with the KASTA app. This includes schedules, timers, scenes and groups.
- Built in overvoltage and overcurrent protection.
- Suitable for use with phase-cut dimmable LED lights.
- Patent No. 2020100102, 201921826044.4.
FUNCTION SETUP
Operate via Load Control Button.
Restores all settings back to the factory
*If successful, light will pulse the number of times that the switch was clicked, indicating function.
TECHNICAL SPECIFICATIONS
- Operating Temp: -20ºc to 40ºc
- Supply: 220-240V AC 50Hz
- Dimming Method: Phase-Cut/ Trailing Edge
- Dimming Range: 1% – 100%
- LED Load Wattage: 350W, 1.4A
- Minimum Load: 2W
- Standby: <1W
- Dimmable LED: Max. Load 350W
- Electronic step-down converter: Max. Load 350W
- Thermal Derating: 40°C – 60°C (350W-250W)
CONNECTION DIAGRAM
kasta.com.au | (02) 9168 5900
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>