KASTA H2PPWHB Series Powerpoint Double Horizontal 10A 220-240V a.c. Instruction Manual
- June 5, 2024
- KASTA
Table of Contents
KASTA H2PPWHB Series Powerpoint Double Horizontal 10A 220-240V a.c.
APP Installation
Visit: www.kasta.com.au or your app store to download the free KASTA app. iOS: requires iOS 9.0 or later. Android: requires Android 4.4 or later. Devices must support Bluetooth 4.0
Important Safety Information
- This product must be installed by a licensed electrician in accordance with all the requirements of AS/NZS 3000 (current edition) and other relevant Standards and Regulations.
- Electricity MUST be disconnected prior to installation. Failure to do so may result in serious injury and or loss of life.
- Indoor use only. Not suitable for damp or explosive environments.
- Complies to Australian Standards AS/NZS 60950.1:2015, AS/NZS CISPR 15.
- No user-serviceable parts inside.
FEATURES
- Control and monitor appliances with a standard 2 or 3-pin plug.
- 2x 10A individually switched power outlets.
- Simple 3 wire connection – A, N, E.
- Pair with KASTA remote switch devices for control (up to 8x maximum).
- Smart functions per outlet programmed via phone/tablet with the KASTA app. This includes schedules, timers, scenes and groups.
- Child Lock function per outlet (lock outlet in off state) activated from the button or the KASTA app.
- Energy monitoring function per outlet viewed from the KASTA app.
- Built in overvoltage, overcurrent and overtemperature protection.
FUNCTION SETUP
Operate via individual Load Control Button.
ON/OFF BUTTON: 1 CLICK
- Turns load on or off. Button LED indicator is white when on.
CHILD LOCK: 4 SECOND LONG PRESS
- Button LED indicator changes to green if successful after long press (four seconds).
- Long press (four seconds) again to deactivate.
DELAY TO OFF: 3 CLICKS
- Load automatically turns off after set time selected via the app.
- LED indicator will flash 3 times if successful. 1 click to cancel.
- LED indicator will flash once.
FACTORY RESET: 9 CLICKS
- Restores all settings back to factory.
- If successful, light and LED indicator light will pulse the number of times that the button was clicked, indicating function
TECHNICAL SPECIFICATIONS
- Operating Temp: -20ºc to 40ºc
- Supply: 220-240V AC 50Hz
- Maximum Load: 2 x 10A (2400W)
CONNECTION DIAGRAM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>