KASTA KB12RGBTWD1-WH Smart Downlights Instruction Manual
- June 5, 2024
- KASTA
Table of Contents
Installation Instructions
KASTA
Smart Downlights
Product Code:
KB12TWD1-WH/ KB12RGBTWD1-WH
APP Installation
Visit www.kasta.com.au or your app store to
download the free KASTA app.
iOS: requires iOS 9.0 or later.
Android: requires Android 4.4 or later.
Devices must support Bluetooth 4.0
Important Safety Information
- This product must be installed by a licensed electrician in accordance with all the requirements of AS/NZS 3000 (current edition) and other relevant Standards and Regulations.
- Electricity MUST be disconnected prior to installation. Failure to do so may result in serious injury and or loss of life.
- Indoor use only. Not suitable for damp or explosive environments.
- Complies to Australian Standards AS/NZS 60950.1:2015, AS/NZS CISPR 15.
- No user-serviceable parts inside.
FEATURES
- Tuneable White LED Downlight.
- RGB and Tuneable White LED Downlight.
- 110mm diameter white trim.
- 90mm cut-out.
- Remote driver with flex and plug.
- IC-4 rated (AU) and IC-F rated (NZ).
- Wireless Bluetooth® Mesh communication.
- Control from the KASTA app or KASTA remote switch devices (8x maximum per downlight).
- On, off, dim, and button press functions from the local button (remote KASTA remote switch devices).
- Configured using the KASTA app (iOS and Android), with a white C (an RGB color wheel and a pre-set color palette).
- Supports Group, Scene, Timer, and Scheduling automation functions.
- 3-year warranty.
FUNCTION SETUP
Controllable via KASTA remote switch devices or the RESET button on the LED Driver.
| ON/OFF | 1 CLICK |
|---|
Turns lights on or off. When turned ON, lights will adjust to the previous
brightness setting.
DIM UP/DOWN| ONE LONG PRESS
When lights are on, long-press the button to dim up or down. Release the
button to stop.
FULL BRIGHTNESS| 2 CLICKS
Sets lights to full brightness.
DELAY TO OFF| 3 CLICKS
Lights turn off automatically after a set time (configured in the app).
SET WHITE CCT COLOUR TEMPERATURE| 4 CLICKS
Cycle through white CCT color temperature. Click the button 1 time to store
the setting.
SET RGB COLOUR| 5 CLICKS
Cycle through the pre-set colors to your desired color.
Click the button 1 time to store the setting.
FACTORY RESET| 9 CLICKS
Restores all settings back to the factory (using the reset button only).
If successful, light will pulse the number of times that the switch was clicked, indicating function.
TECHNICAL SPECIFICATIONS
Operating Temp: -20ºc to 40ºc (IC-4 Max 25ºc)
Supply: 220-240V AC 50Hz
IP Rating: IP44 (light-emitting area)
IP40 (main body)
RGB & CCT: RGB: 16M colours
White: 2700K – 6500K
Input Power: Max 12W +/- 10% (White)
CRI: ≥80 (for White)