duux DXCF15 Whisper Flex Ultimate Smart Wireless Fan User Manual

duux DXCF15 Whisper Flex Ultimate Smart Wireless

Box Content

Product overview

1.  Remote control receiver
2.  Display & Control panel
3.  Power button
4.  Remote control
5. Remote control position 1
6.  Remote control position 2
7.  Power adapter

Installation and use

•  For indoor use only. Do not use it in commercial, industrial, or outdoor environments.
•  Do not use the device in the vicinity of flammable or explosive substances or fuels. Never use any paint, cleaning sprays, anti-insect sprays or similar near the unit; this could deform the plastic or cause electrical damage.
•  Always turn off and unplug the power cord when not in use, servicing, cleaning or moving the device.
•  Do not route the power cord or adaptor under rugs, carpets or furniture. This may damage the cord/adaptor or cause it to overheat creating a fire hazard.
•  Do not route the power cord in or through doorways or areas where the cord may be damaged or create a tripping hazard.
•  Only use the device in the upright position on a flat level surface (even during transport) and at least 50cm from any objects.
•  Never insert or allow fingers or objects to enter grill openings while the device is operating to prevent injury and/or damage to the device.
•  Do not block, cover or obstruct the air inlet/ outlet while the device is operating.
•  Never use a single extension cord to operate more than one electrical device.
•  Do not use the device near a window opening. Rain may create an electrical hazard.
•  Do not use this device when it is damaged or not functioning properly.
•  Do not operate the device with a damaged cord or plug.
•  Do not mount the device on walls or ceilings. • Do not operate the device when the housing is removed or damaged.
•  Do not use the device in swimming pools, washrooms or similar wet areas.
•  Do not use the device in a potentially explosive environment containing combustible liquids, gases or dusts.
•  Ensure that there is at least 50cm between the sides of the device and any flammable, heating materials.
•  Closely supervise any children and pets when the device is in use.
• Keep children away from playing with the device.
•  Do not pull the unit along by the cord.
• If the supplied power cord is damaged it must be replaced by an electrician or qualified person to avoid any hazard.
•  The mains supply must confirm to the specification shown on the rating label on the back of the device.
•  Close doors and windows for optimal efficiency.
•  Keep curtains or blinds closed during the sunniest hours of the day.
•  Do not turn on the device if you have discovered damage to the appliance, cord or plug or if the device is malfunctioning or if there are signs of any other defect. Return the complete product to the point of purchase orto a certified electrician for inspection and/or repair. Always ask for original parts. The device (incl. cord and plug) may only be opened and/or repaired by properly authorized and qualified persons.
•  Only a licensed professional is allowed to dismantle or modify the device.
•  This device is to be used only for its prescribed purpose. Any other use is deemed to be a cause of misuse. The user/operator, not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this

Installing the product

1. Install fan blade: Place the fan blade on the motor.
   Note: Make sure the pins on the motor axis align with the groove on the fan blade

2. Secure fan blade: Use the plastic nut to secure the fan blade to the motor. Install and secure rear grill: Place the rear grill over the motor and tighten with the locking ring.

3. Install front grill: Place the front grill on the back grill. While doing so, make sure to align the arrow on the front grill with the right-side marker. Rotate it counter clockwise until it aligns with the left-side marker.

4. Fit the supplied screw (part 6) to the underside of the grill and connect the two halves firmly together.

Installing the remote control

• Open battery compartment: Slide the battery tray out of the remote Place battery: Look for the correct orientation of the polarity (+ and -).
• Close the battery compartment
• : Slide the battery tray back into the remote until it snaps in place.

Installing the dock + battery pack

• Open battery compartment: Open the battery hatch on the bottom of the base by sliding the lock to “unlock” and remove the lid.
• Place battery: Place the battery in the battery compartment.
• Close battery compartment: Place the lid backon the compartment and push to close. You should hear an audible click.

Maintenance

• Cleaning the fan
  Use a soft, damp cloth to wipe the fan clean. Never use aggressive chemicals, gasoline, detergents,chemically treated cloths, or other cleaning solutions. These all could possible damaging the casing material.

• Cleaning the fan blades
  Use the screwdriver to remove the screw located at the bottom of the grill. Turn the front grill clockwise and remove it. Unscrew the plastic nut and remove the fanblade from the motor. Use a soft, damp cloth to wipe the fan blade clean.

Functions

Instructions for use

• WiFi status
  Only visible when WiFi is connected

• Power status
  Only visible when the fan is off

• Battery status
  Shows the battery status in 3 levels.

• Regular mode
  Choose from 30-speed settings for consistent airflow.

• Natural wind mode
  Variable wind speeds and oscillation in both directions to simulate natural wind conditions.

• Night mode
  By selecting this mode, the LED display will automatically turn off after 10 seconds for an undisturbed night’s sleep

• Temperature function
  Set a temperature goal. When this setting is active, the fan will measure ambient temperature and will decrease its when speed when the goal is reached.

• Timer function
  Set a timer to switch the fan off automatically. Choose a time between 0 and 12 hours.

Battery operation

Operating instructions

• Assemble the fan according to chapter “Installing the product” of this manual.

• Plug the power adapter in an available power socket and plug the connector into the base of the product. The display will light up and show the power icon.

• Press the power button to turn the product on. The fan will start in default setting or resume operation according to the most recent setting.

• Operating instructions
  The control panel allows for two actions by the user:

  •  pressing the control ring
  •  rotating the aluminum ring; both clockwise and counterclockwise.

• Rotate the ring to select different functionalities. A flashing icon indicates what mode or setting is currently selected. Press the display to confirm the selected functionality. Modes: Activate a mode by selecting the corresponding

• icon and pressing to confirm. Next, choose the desired wind speed by rotating the ring and press to confirm.

WiFi mode
To activate the WiFi mode make sure the fan is off, meaning that the blades aren’t spinning and the power icon is on. Press and hold the control ring for 5 seconds. When successful the WiFi-icon will start flashing. The fan will actively search fordevices to pair with while a timer counts down from 99 to 0. Once connected, the WiFi-icon will turn solid.

WiFi and APP operation
Scan below QR code to download the Duux APP or search DUUX APP in the App Store or GooglePlay Store to start the procedure to download the APP. Once installed, enter your e-mail address and complete the registration.

Connect to WiFi
Once registered, click “add duux device” on the main screen or use the “+” button in the top right corner to add a new device. Search for “Whisper Flex Ultimate” and press to continue Connect to your preferred WiFi network and enter the corresponding password Follow the instructions in the app to complete the pairing process.

Technical specifications

Disposal

The European directive 2012 / 19 / CE on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed in the normal unsorted municipal waste stream. Old appliances mustbe collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the applianceit must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

References

• Duux | Designed for better air.
• EU conformiteitsverklaringen | Duux | Designed for better air.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>