duux DXCF11 Whisper Flex Portable Fan User Manual
- June 5, 2024
- duux
Table of Contents
duux DXCF11 Whisper Flex Portable Fan
WHAT IS IN THE BOX
PRODUCT OVERVIEW
PARTS
- User manual
- Base unit
- Extension tube
- Motor
- Front/ back grill fan blades
- Tools (locking ring+ plastic screw+ metal screw)
- Power adapter
- Remote control
Installation and Use
Read before installation:
- When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury.
- Before using the device, please carefully read the entire instruction manual
A General cautions
- For indoor use only. Do not use in commercial, industrial or outdoor environments.
- Do not use the device in the vicinity of flammable or explosive substances or fuels.
- Never use any paint, cleaning sprays, anti-insect sprays or similar near the unit; this could deform the plastic or cause electrical damage.
- Always turn off and unplug the power cord when not in use, servicing, cleaning or moving the device.
- Do not route the power cord or adaptor under rugs, carpets or furniture. This may damage the cord/adaptor or cause it to overheat creating a fire hazard.
- Do not route the power cord in or through doorways or areas where the cord may be damaged or create a tripping hazard
- Only use the device in the upright position on a flat level surface (even during transport) and at least 50cm from any objects.
- Never insert or allow fingers or objects to enter grill openings while the device is operating to prevent injury and/or damage to the device.
- Do not block, cover or obstruct the air inlet/ outlet while the device is operating8
- Never use a single extension cord to operate more than one electrical device.
- Do not use the device near a window opening Rain may create an electrical hazard.
- Do not use this device when it is damaged or not functioning properly
- Do not operate the device with a damaged cord or plug
- Do not mount the device on walls or ceiling.
- Do not operate the device when the housing is removed or damaged.
- Do not use the device in swimming pools, washrooms or similar wet areas.
- Do not use the device in a potentially explosive environment containing combustible liquids, gases or dusts.
- Ensure that there is at least 50cm between the sides of the device and any flammable, heating materials.
- Closely supervise any children and pets when the device is in use.
- Keep children away from playing With the device.
- Do not pull the unit along by the cord.
- If the supplied power cord is damaged it must be replaced by an electrician or qualified person to avoid any hazard.
- The mains supply must confirm to the specification shown on the rating label on the back of the device.
- Close doors and windows for optimal efficiency. Keep curtains or blinds closed during the Sunniest hours of the day.
- Do not turn on the device if you have discovered damage to the appliance, cord or plug or if the device is malfunctioning or if there are Signs of any other defect.
- Return the complete product to the point of purchase or to a certified electrician for inspection and/or repair, Always ask for original parts.
- The device (incl. cord and plug) may only be opened and/or repaired by properly authorized and qualified persons.
- Only a licensed professional is allowed to dismantle or modity the device. This device is to be used only for its prescribed purpose.
- Any other use is deemed to be a cause of misuse. The user/operator, not the manulacturer will be liable for any damage or injuries of any kind caused as a result of this
Installing the product
- Place the rear grill (part 5) over the motor (part 4) and tighten with the locking ring (part 6).
- Attach the fan blades (part 5) to the motor.
- Use the plastic screw (part 6) to secure the tan blades.
- Fit the front grill (part 5) and rotate it a little, clockwise, until the arrow on the grill lines up with the left-side marker.
- Fit the supplied screw (part 6) to the underside of the gril and connect the two halves firmly together.
- Attach the motor to the connector input on the base unit (part 2). Refer to point 7 for attachment of extension tube.
- (optional) To extend the height of the fan, Connect the male pins of the extension tube (part 3) to the female connectors on the base and lower side of the motor. To release the tube, push the buttons together with your thumb and forefinger. Pull the extension tube at the same time.
Installing the remote control
- Open the battery compartment with your thumb and forefinger.
- Place the battery according to the instructions on the lid with the correct polarity on the back of the remote cotrol.
- Slide the cover back on the remote control.
Installing the dock+ battery pack
- Open the battery hatch on the bottom ot the base unit by switching the lock position to “unlock” and remove the lid.
- Place the battery according to the instruction inside the battery hatch with the correct polarity
- Close the battery hatch by placing back the lid and switching the lock position to “lock”
MAINTENANCE
Cleaning the body
Use a soft, damp cloth to wipe the body clean Never use aggressive chemicals, gasoline, detergents, chemically treated cloths, or other cleansing solutions. These all could possibly hurt the casing material.
Cleaning the fan blades
- Follow below instructions to clean the fan blades:
- Turn clockwise and remove the grill.
- Disassemble the fan blades from the mot shown in the picture.
FUNCTIONS
Instructions for use
- Ventilation speed
- The Whisper Flex has 26 speed settings. When the LED display shows ’00, the device is switched off.
- Horizontal oscillation
- The fan swivels horizontally, O to 90 degrees, from left to right.
- Vertical oscillation
- The fan swivels vertically, 0-100 degrees, from top to bottom.
- Timer
- The timer can be set to switch the fan off automatically. This can be set to between 0 and 12 hours from the time that the fan is first turned on.
- Natural wind
- The fan rotates at different speeds to simulate natural wind conditions.
- Night mode
- By selecting this mode, the LED display will automatically turn off after 10 seconds for an undisturbed night’s sleep.
- Battery mode
- Detach the fan from the dock to operate o battery mode.
BATTERY OPERATION
Operating instructions
- Remove the parts from the packaging and assemble the device according to the instructions in this manual
- Connect the power cable to the input terminal in the base of the product. Then insert the plug into the wall socket. The LED display will light up and show ’00.
- Press the control ring once, to turn the product on. The fan springs into life and will thereafter default to the most recent speed setting
- Use the stainless steel exterior of the aluminum control ring to switch between settings.
- When an icon flashes, you can adjust this functionality by turning the LED display and set it by pressing the LED display. when the desired position is reached, press the control ring again to confirm the selection.
- When setting the fan speed and timer function, the LED display will continue to flash until the desired setting is selected. After this, press the
- Control ring again to confirm the selection.
- Once the function is set, the icon will stop blinking and will remain visible in the display, for as long as this function is set to on. &Press and hold the control ring to switch off the device.
WiFi mode
Press and hold the control ring for 5 seconds to activate the WiFi mode. The
timer will count down from 99 and start searching for devices to pair Once
connected, the will turn solid.
APP operation
Scan below QR code to download the Duux APP or search DUUX APP in the App
Store or Google Play Store. Once installed, enter your e-mail address and
complete the registration
Connect to WiFi
- Once registered, click “add duux device” on the main screen or use the “+” button in the top right corner to add a new device.
- Search for “Whisper Flex” and press to continue
- Connect to your preferred WiFi network and enter the corresponding password
- Follow the instructions in the app to complete the pairing process.
TECHNICAL SPECIFICATION
Disposal
The European directive 2012 /19/CE on Waste Electrical and Electronic
Equipment (WEEE),. requires that old household electrical appliances must not
be disposed of in the normal unsorted municipal waste stream. Old appliances
must be collected separately in order to optimize the recovery and recycling
of the materials they Contain and reduce the impact on human health and the
environment. The crossed-out “wheeled bin” symbol on the product reminds you
of your obligation, that when you dispose of the appliance it must be
separately collected. Consumers should contact their local authority or
retailer for information concerning the correct disposal of their old
appliance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>