duux 857013 Whisper Flex Smart Wireless User Manual

857013 Whisper Flex Smart Wireless
User Manual

Thank you for choosing Dulux.
We’re so glad you decided to read the instructions to your new Dulux fan! Many users casually dismiss instructions and seek to figure it out on their own. But studies show that people who read instructions will get up to speed more quickly and efficiently than those who poke around with trial and error.
At Dulux, we believe in the importance of a comfortable and healthy living environment. Enhancing your wellbeing by designing appealing, functional and effective products is the passion that drives us every day. With our range of innovative air treatment products, we aim to provide you with the best possible indoor air quality.
Meet the cooling fan that surprises you with a gentle breeze, a vigorous gust of wind, and everything in between. The Dulux Whisper has no less than 26 settings. In this way, you can always find the perfect airflow environment. Thanks to the horizontal and vertical oscillation function, the Whisper provides a pleasant coolness throughout any room. Choose yourself, which mode you prefer: fixed speed, ‘natural wind’ or perhaps the night mode, by which you are lulled into sleep by the whispering breeze.
Read the manual carefully to get the most out of your Whisper fan.
Box contents

Product overview

Installation and use

Read before installation:

• When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury.
• Before using the device, please carefully read the entire instruction manual.

General cautions

• For indoor use only. Do not use it in commercial, industrial, or outdoor environments.
• Do not use the device in the vicinity of flammable or explosive substances or fuels. Never use any paint, cleaning sprays, anti-insect sprays, or similar near the unit; this could deform the plastic or cause electrical damage.
• Always turn off and unplug the power cord when not in use, servicing, cleaning, or moving the device.
• Do not route the power cord or adaptor under rugs, carpets, or furniture. This may damage the cord/adaptor or cause it to overheat creating a fire hazard.
• Do not route the power cord in or through doorways or areas where the cord may be damaged or create a tripping hazard.
• Only use the device in the upright position on a flat level surface (even during transport) and at least 50cm from any objects.
• Never insert or allow fingers or objects to enter grill openings while the device is operating to prevent injury and/or damage to the device.
• Do not block, cover or obstruct the air inlet/outlet while the device is operating.
• Never use a single extension cord to operate more than one electrical device.
• Do not use the device near a window opening. Rain may create an electrical hazard.
• Do not use this device when it is damaged or not functioning properly.
• Do not operate the device with a damaged cord or plug.
• Do not mount the device on walls or ceilings.
• Do not operate the device when the housing is removed or damaged.
• Do not use the device in swimming pools, washrooms, or similar wet areas.
• Do not use the device in a potentially explosive environment containing combustible liquids, gases, or dust.
• Ensure that there is at least 50cm between the sides of the device and any flammable, heating materials.
• Closely supervise any children and pets when the device is in use.
• Keep children away from playing with the device.
• Do not pull the unit along by the cord.
• If the supplied power cord is damaged it must be replaced by an electrician or qualified person to avoid any hazard.
• The main supply must conform to the specification shown on the rating label on the back of the device.
• Close doors and windows for optimal efficiency.
• Keep curtains or blinds closed during the sunniest hours of the day.
• Do not turn on the device if you have discovered damage to the appliance, cord, or plug or if the device is malfunctioning, or if there are signs of any other defect. Return the complete product to the point of purchase or to a certified electrician for inspection and/or repair. Always ask for original parts. The device (incl. cord and plug) may only be opened and/or repaired by properly authorized and qualified persons.
• Only a licensed professional is allowed to dismantle or modify the device.
• This device is to be used only for its prescribed purpose. Any other use is deemed to be a cause of misuse. The user/operator, not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this.

Installing the product

| |
---|---|---
1. Place the mount on the base of the product, slightly turn counterclockwise to lock into the base, and tighten with the locking ring on the bottom side.| 2. Place the rear grill over the motor and tighten with the locking ring.| 3. Attach the fan blades to the motor.
Note: make sure that the grooves in the fan blades are slid over the pins
| |
4. Use the plastic screw to secure the fan blades.
Note: turn the screw anticlockwise firmly to secure it.| 5. Fit the front grill and rotate it a little, clockwise, until the arrow on the grill lines up with the left-side marker.| 6. Fit the supplied screw to the underside of the grill and connect the two halves firmly together.

Installing the remote control

1. Remove the lid
2. Place the battery according to the instructions on the lid with the correct polarity
3. Close the lid

Note:

• Only use 1x CR2025 3V batteries
• Non-rechargeable batteries are not to be recharged
• Exhausted batteries are to be removed from the remote control and safely disposed of
• If the remote control is to be stored unused for a long period, the battery should be removed
• The supply terminals are not to be short-circuited.

Maintenance

Important: Always unplug the device from the mains before cleaning. To maximize the efficiency of the device, clean regularly
Cleaning the body
Use a soft, damp cloth to wipe the body clean. Never use aggressive chemicals, gasoline, detergents, chemically treated cloths, or other cleaning solutions. These all could possibly hurt the casing material.
Cleaning the fan blades
Follow the below instructions to clean the fan blades:

1. Remove the screw from the underside of the grill
2. Rotate the outside cover to unlock the grill and remove it
3. Disassemble the fan blades from the motor as shown in the picture.

Functions

Instructions for use

| Ventilation speed:| The Dulux Whisper fan has 26-speed settings. When the LED display lows ’00’, the device is switched off.
---|---|---
| Horizontal oscillation:| The fan swivels horizontally, 0 to 90 degrees, from left to right.
| Vertical oscillation:| The fan swivels vertically, 0-100 degrees, from top to bottom.
| Timer:| The timer can be set to switch the fan off automatically. This can be set TC between 0 and 12 hours from the time that the fan is first turned on.
| Natural wind:| The fan rotates at different speeds to simulate natural wind conditions.
**| Night mode:**| In night mode, the fan speed continues to operate at the set speed. A.’ter 10 seconds, the LCD screen will completely turn off while remaining to operate. To reactivate the LCD screen, simply press the control ring.

Tip: When in night mode, press the control ring twice to directly adjust the ventilation speed.
Operating instructions

1. Remove the parts from the packaging and assemble the device according to the instructions in this manual.
2. Connect the power cable to the input terminal at the base of the product. Then insert the plug into the wall socket. The control ring will light up and show ‘00’.
3. Press the control ring once, to turn the product on. The fan springs into life and will thereafter default to the most recent speed setting.
4. Use the stainless steel exterior of the control ring to switch between settings.
5. When a display icon is flashing, you can set and adjust this setting by pressing the control ring. When the desired position is reached, press the control ring again to confirm the selection.
6. When setting the fan speed and timer function, the LED display will continue to flash until the desired setting is selected. After this, press the control ring again to confirm the selection.
7. Once the function is set, the icon will stop blinking and will remain visible in the display, for as long as this function is set to on.
8. Press the control ring for a few seconds to switch off the appliance.

Technical specifications

| Weight| 4.3 kg
---|---|---
| Noise level| 13-50dBa
| Airflow| 710 CBM/hr
| Power consumption| 26W-220 – 240V-50/60 Hz
| Fan speed| 26 speeds
| Adjustable height| 73-95 cm
| Display| Digital LCD display
| Main material types| ABS, PP
| Model no| DXCF03/09

Disposal
The European directive 2012 / 19 / CE on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed-out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliances.

Designed in The Netherlands by Dulux BV. Made in P.R.C.
Duux BV, P.O. Box 145, 5400 AC Uden Netherlands, www.duux.com
© 2021 Dulux. All rights reserved.
DUUX® is a trademark of Dulux BV,
registered in the EU and other countries.
The brand cited belongs exclusively to the respective owners.
Specifications are subject to modification without notice.
Version: IMDXCF0309_V3

References

• Duux | Designed for better air.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>