duux DXMA04 Blizzard Smart Mobile Airconditioner User Manual

duux DXMA04 Blizzard Smart Mobile Airconditioner

We’re so glad you decided to read the instructions to your new Duux smart mobile airconditioning! Many users casually dismiss instructions and seek to figure it out on their own. But studies show that people who read instructions will get up to speed more quickly and efficiently than those who poke around with trial and error.
At Duux we believe in the importance of a comfortable and healthy living environment. Enhancing your well-being by designing appealing, functional and effective products is the passion that drives us every day. With our range of innovative air treatment products we aim to provide you the best possible indoor air quality.

Unproductive working days, sweaty dinners or sleepless nights. Summers are getting longer and hotter each year, meaning it’s time for a new best friend that’ll make those days a lot more enjoyable. Meet Blizzard: a mobile airco with front output for extra efficient cooling. Its unconventional design makes it a true eye catcher, and the wheels and handles on both sides allow you move it wherever you want. So you’ll always stay cool. Read this manual carefully to get the most out of your Blizzard mobile airconditioner.

Product overview

Accessoires

11. Exhaust hose
12. Adaptor – for insertion over hose and into window spacer (or into hole in the wall/window). Connector for exhaust pipe
13. Window kit
14. Drain tube for continuous drainage
15. Active carbon filter
16. Remote control

Installation and use

Read before installation

• This appliance is filled with Propane gas R290. Strictly follow the manufacturer’s instruction concerning use and repairs.
• Before using the device, please carefully read the entire instruction manual
• Do not install, operate or store the device in a room smaller than 7m² (DXMA04) / 10m² (DXMA05)

General cautions

• For indoor use only.
• Do not use in cabinet, closets, boats, caravans or similar locations.
• Do not use the device in swimming pools, washrooms or similar wet areas.
• Leave the device to stand for 12hours before connecting to the mains supply after transport or when it has been tilted (e.g. during cleaning).
• Only use the device in the upright position on a flat level surface (even during transport) and at least 50cm from any objects.
• Do not use the device in a potentially explosive environment containing combustible liquids, gases or dusts.
• Do not use the device in the vicinity of flammable or explosive substances or fuels. Never use any paint, cleaning sprays, anti-insect sprays or similar near the unit; this could deform the plastic or cause electrical damage.
• Ensure that there is at least 50cm between the sides of the device and any flammable, heating materials.
• Do not place objects on the device or restrict air inlet/outlet.
• Avoid the device from splashing water.
• Closely supervise any children and pets when the device is in use.
• This device can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Keep children away from playing with the device.
• Cleaning and user maintenance shall not be made by children without supervision.
• Switch off and unplug the device when not in use.
• Never leave a functioning device unsupervised.
• Do not pull the unit along by the cord.
• Avoid over-twisting, -coiling, -pulling the power cord. Never use nylon or iron wire to tide the power cord.
• Make sure that the plug and socket remain visible and accessible at all the time.
• Do not use extension cords.
• Never reach to retrieve the unit if it has fallen in water. In such case, immediately pull the plug from the mains and have the unit checked before using it again.
• If the supplied power cord is damaged it must be replaced by an electrician or qualified person to avoid any hazard.
• The mains supply must confirm to the specification shown on the rating label on the back of the device.
• The appliance shall be installed in accordance with national wiring regulations.
• Do not exceed the recommended room size for max. efficiency.
• Close doors and windows for optimal efficiency.
• Keep curtains or blinds closed during the sunniest hours of the day.
• Keep filters clean.
• Once the room has reached the desired conditions, reduce the setting for temperature and ventilation.
• Do not turn on the device if you have discovered damage to the appliance, cord or plug or if the device is malfunctioning or if there are signs of any other defect. Return the complete product to the point of purchase or to a certified electrician for inspection and/or repair. Always ask for original parts. The device (incl. cord and plug) may only be opened and/or repaired by properly authorized and qualified persons.
• Only a licensed professional is allowed to dismantle or modify the device.
• This device is to be used only for its prescribed purpose. Any other use is deemed to be a cause of misuse. The user/operator, not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this.

Installation of the window kit
Blizzard is a portable air conditioner that may be moved from room to room. Please refer to the seperate instructions on how to install the included window kit.

Mounting of the exhaust pipe

• Use only the hose provided and clip exhaust hose to the back of the air conditioner
• Avoid kinks and bends in the exhaust hose as this will cause expelled moist air to build up causing the unit to overheat and shut down. Figures below will show the correct position.
• The hose may be extended from 300mm to 1500mm but for maximum efficiency use the shortest length possible.

Warning! The length of the exhaust pipe is specially designed according to the specification of this product. Do not replace or prolong it with your own private hose as this could cause the unit to malfunction.

Installation of the carbon filter

1. Remove the filter from the unit.
2. Remove the active carbon filter from its plastic bag.
3. Insert the active carbon filter into the back of the unit.
4. Re-fit the filter inside the unit.

Installation of the remote control

1. Remove the lid.
2. Place the battery according to the instructions on the lid with the correct polarity.
3. Close the lid.

Note:

• Only use 1x CR2032 3V batteries
• Non-rechargeable batteries are not to be recharged
• Exhausted batteries are to be removed from the remote control and safely disposed of
• If the remote control is to be stored unused for a long period, the battery should be removed
• The supply terminals are not to be short-circuited.

Maintenance

Always unplug the air conditioner from the mains before cleaning. To maximize the efficiency of the air conditioner, clean regularly.

Cleaning the body
Use a soft, damp cloth to wipe the body clean. Never use aggressive chemicals, gasoline, detergents, chemically treated cloths, or other cleansing solutions. These all could possibly hurt the casing material.

Cleaning the filter
Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt from the filters and then rinse thoroughly under running water (no hotter than 40⁰C). Dry thoroughly before replacing.

Note: Never operate the unit without the filter.

Long term storage

• Drain any remaining water in the unit
• Operate the unit in ventilation mode only for a few hours to thoroughly dry the inside.
• Clean or change the filter.
• Unplug and store the power cord.
• Cover the device in a close carton or bag (not hotter than 40⁰C). Dry thoroughly before storing.
• Do not store the device in a room smaller than 7m² (DXMA04) / 10m² (DXMA05)

Functions

1. On/Off (power)
2. Speed (ventilation)
3. Timer indicator
4. Timer
5. Night mode
6. Night mode indicator
7. Select mode
8. Temperature up
9. Temperature down
10. Indicator for compressor operation
11. Full Water indicator
12. Low ventilation indicator
13. Middle ventilation indicator
14. High ventilation indicator
15. Receiver for remote control
16. LCD display
17. Auto mode indicator
18. Dehumidifying mode indicator
19. Cooling mode indicator
20. WiFi button/indicator
21. Fan mode indicator
22. WiFi button

Power switch

1. Press the ON/OFF button and the unit will start automatically. If the ambient temperature is:
   • Higher than 22⁰C, the unit will operate in cooling mode.
   • Higher than 20⁰C but below or equal to 22⁰C, the unit will operate in ventilation mode.

2. Indicators of the functions in progress are shown simultaneously.
   Note: The display window shows the ambient room temperature from 0⁰C to 50⁰C.

3. To turn the unit off, press ON/OFF button again

Select operation mode
Press the MODE button to select the preferred operation mode: automatic, cooling, fan or dehumidify. The indicator of your selected mode will illuminate.

Setting the temperature

1. Press ‘Temperature up’ or ‘Temperature down’ button to regulate the temperature according to your preference.
2. The display window will show the desired temperature as you press ‘Temperature up’ or ‘Temperature down’ button. In stand-by mode, it will always show the ambient temperature.
3. The pre-set temperature of this machine is 24⁰C for cooling.

Adjusting the ventilation speed

1. Press the SPEED button to choose the ventilation speed you prefer: high, medium or low. The indicator of high, medium or low ventilation will illuminate.
2. If the unit is in AUTO mode, it will choose the ventilation speed automatically according to the ambient temperature (the relevant indicator will illuminate). When AUTO mode in active, the SPEED button is disabled.

Setting the timer

1. Press the TIMER button to set a time-out (1 to 24 hours, the timer indicator will illuminate). When the set time has been reached, the machine will turn off automatically. The LCD display will show the hour(s) you set as you press the TIMER button.
2. By pressing the TIMER button without using the other functions, you can activate a start delay. For example, if you set the timer to ‘2’, the unit will automatically start after 2 hours.

Night mode

1. When pressing the NIGHT mode button in cooling mode, the set temperature will increase with 1⁰C after one hour, another 1⁰C after two hours and then stays at that temperature.
2. In NIGHT mode, the ventilation will remain at low speed. By pressing the NIGHT mode button again, the temperature and ventilation speed will return to the previous settings.
3. The unit will shut down automatically when NIGHT mode is running for more than 12 hours.

Note: the night mode is not available while the machine is operating in AUTO, Fan (ventilation) or Dehumidification mode.
Note: In night mode, the display will automatically dim after a few seconds. Press to reactive the control panel.

Self-diagnosis
This machine is equipped with self-diagnosis software. If the device is not working, the LCD display will show “E1” or “E2”. When this occurs, please contact your point of purchase.
All the above functions can also be performed with the supplied remote control. This remote control requires a cell battery CR2032 to operate.

Note:

• To prolong the lifespan of the compressor, please wait at least 3 minutes before re-switching on the device after switching off.
• The cooling system will switch off if the ambient temperature is lower than the set one. However, the ventilation keeps operating on the set level. If the ambient temperature rises above the selected level, the cooling will return to work.

Drainage
During the process of cooling, some water will be extracted from the air into the unit. If the reservoir is full, both of the compressor and motor will switch off and the units will buzz (press any button to turn it off). The WATER FULL indicator will flash to show you.
In this case, please empty the water by following the steps below:

1. Turn off the air conditioner and avoid moving it when the water tank is full.
2. Put a container (a water tray for example) underneath the drain hole.
3. Remove the drain knob & rubber plug from the drain hole and allow the water to drain out.
4. When the container is almost full, close the drain hole with the rubber plug and empty the water tray.
5. Repeat until the unit is fully empty.
6. Replace the rubber plug and firmly tighten the drain knob.
7. Switch on the device – the full water indicator should not be flashing anymore.

If you wish to operate the unit without the need to empty the water tank (continuous drainage), please follow these steps:

• Remove the drain knob and rubber plug and retain for future use.
• Connect the drain tube supplied to the water outlet as shown and locate the other end into a drain.
• The drain tube may be extended by adding an extension tube and using a suitable connector.

Note:

• The drain must be at or below the outlet level.
• The FULL WATER indicator will be disabled in this mode of drainage.

WiFi mode
Press and hold the button for 5 seconds to activate the WiFi mode. The indicator will flash and start searching for devices to pair. Once connected, the will turn solid.

WiFi and APP operation
Scan below QR code to download the Duux APP or search DUUX APP in the App Store or Google Play Store to start the procedure to download the APP. Once installed, enter your e-mail address and complete the registration.

Connect to WiFi

1. Once registered, click “add duux device” on the main screen or use the “+” button in the top right corner to add a new device.,
2. Search for “Blizzard” and press to continue
3. Connect to your preferred WiFi network and enter the corresponding password
4. Follow the instructions in the app to complete the pairing process.

Note: if you experience any problems with connecting or using the app, please refer to the FAQ in the app menu.

Technical specifications

The appearance and specification of the device may be changed without notice.

Cold arctic air delivered through an unconventional design.

FAQ

The air conditioner does not turn on. What should I do?

• Please check if the air conditioner is plugged in
• Please check for a possible power failure
• Please check if the WATER FULL indicator is blinking. If so, empty the water tank.
• Please check if the room temperature is below the set temperature. In that case, the device will not cool.

The device seems to have little effect. What is wrong or how can I improve this?

• Please check if direct sunlight is entering the room. Close all curtain to keep the warmth outside.
• Close doors and windows
• Many people in the room rises the room temperature which makes it harder to reach the desired temperature
• Please check if there is something is the room that could produce a lot of heat (e.g. microwave)
• Please check if the air intake or output are blocked
• Please check if the room temperature is below the set temperature. In that case, the device will not cool.

The unit makes a lot of noise. What is wrong?
Please check if the device is on a stable surface and not positioned unevenly. This could cause the compressor to make loud noise.

The compressor doesn’t work. What is wrong?
It could be possible that the overheat protection of the compressor is on. Wait a few minutes for the temperature to drop.

I see an error code. What does it mean?
See below table with error codes and their explanations. In all cases, please contact your point of sale of local service point for repair.

compressor and fan motor will stop.
E4| When the TC sensor wire senses the temperature is > or = 130oC for more than 5 seconds. The compressor and fan motor stop.

Disposal

The European direct ive 2012 / 19 / CE on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>