SEQURE ES126 Electric Screwdriver Portable Cordless Screwdriver Set Instruction Manual
- June 17, 2024
- SEQURE
Table of Contents
Smart
Screwdriver
Instruction
Manual
Product Description
SQ-ES126 is a smart screwdriver with angle sensing, supporting electric &
manual working modes. The master control is based on the 32-bit MCU, equipped
with HD OLED digital display.
Supporting Type-C 5V charging & firmware upgrading.
The LED lights in front illuminate at close range, allowing users to work
easily at the darkness.
Parameter Setting
Gear Setting: On the Home Screen, press A button or B button 3 times continuously to enter the gear setting interface. Press the buttons to select the gears. After setting, long press the buttons to back to the Home Screen. Or it will automatically back to the Home Screen after saving data.
Sensitivity Setting: On the Home Screen, press A button or B button 5 times continuously to enter the sensitivity setting interface. Press the buttons to select the startup sensitivity of the screwdriver. After setting, long press the buttons to back to the Home Screen. Or it will automatically back to the Home Screen after saving data.
Gear setting
|
| The angle of rotation is proportional to the torque
---|---|---
The torque decreases gradually
Firmware Version
Sensitivity setting
|
Action
|
MAX
| High sensitivity
MID
| Medium sensitivity
MIN
| Low sensitivity
Firmware Upgrade
In the screen off state, connect the screwdriver to the until the screen shows “UPDATE”. Download the firmware to computer via a Type-C cable. Long press A button or B button the computer virtual disk from www.sequremall.com. The screen shows” NO”, the upgrade fails. The screen shows “YES”, the upgrade success. After upgrading, just disconnect.
Working State
Press B button to turn on the LED light.
On the Home Screen, long press the A button or B button, and turn the
screwdriver clockwise. The screen shows the icon: , which indicates the screw
is tightened. Turn the screwdriver counterclockwise, and the screen shows the
icon: which indicates the screw is screwed out.
Product Parameters
| Charging Voltage | Type-c 5V |
|---|---|
| Charging Time | 30min |
| Ruining Time | 60min |
| Screwdriver Bit | 4MM inner hexagon |
| Shell Material | 304 stainless steel |
| Screen | 0.69 inch OLED |
| Front Lighting | LED |
| Battery Capacity | 320mAh |
+86 769-89399884