duux Ultrasonic Humidifier User Manual

Beam
ultrasonic humidifier
user manual

Thank you for choosing Duux.
We’re so glad you decided to read the instructions to your new Duux air humidifier! Many users casually dismiss instructions and seek to figure it out on their own. But studies show that people who read instructions will get up to speed more quickly and efficiently than those who poke around with trial and error.
At Duux we believe in the importance of a comfortable and healthy living environment. Enhancing your wellbeing by designing appealing, functional, and effective products is the passion that drives us every day. With our range of innovative air treatment products, we aim to provide you the best possible indoor air quality.
Dry skin, dry throat, or regular headaches? Chances are the air inside your home is too dry. Meet Beam, the versatile high-capacity humidifier with a minimal footprint. Its large water tank capacity of 5 liters and high mist output of 350 ml/h ensure optimum performance. Filling the Beam is easy thanks to its top filling capability. And its built-in hygrostat and built-in temperature sensor work wonders when it comes to ease of use.
Read this manual carefully to get the most out of your Beam ultrasonic humidifier.

Product overview

* = To use the remote control, please lift from the dock by gently pulling out from the bottom

Installation and use

Note: Please take notice of below instructions and the separately included warning sheet before using the product.
Installation

• Check the voltage on the device label before use. Only connect the device to sockets that correspond to the voltage of the device. If you are unsure whether your connections meet the requirements, consult an electrician or your electricity supplier.
• Do not disassemble and repair the appliance without authorization.
• If the power cord is damaged, in order to avoid danger, it must be replaced by the manufacturer or its maintenance department, and not by yourself.;
• If there is any abnormality, please unplug the power cord immediately and it must be repaired by the manufacturer or its maintenance department.
• Regularly clean the dust on the power cord plug;
• Unplug the device during filling and cleaning.
• When pulling the plug, hold the power plug instead of pulling the power cord;
• Do not touch the water and parts of the product while the power is on;
• Do not cover the air inlet and the mist outlet with items such as towels;
• This is not a toy. To avoid accidents, keep it away from babies and children. Do not put it in a crib, stroller or playpen. Please do not let children and babies play and use the device;
• Do not use the device on a sloping table, it should be placed in a flat and stable surface;
• Do not add flavors or similar substances produced or supervised by the company to the water tank and water tank in the device; You can use the designated aroma tray underneath the lid to add aromatherapy.
• Do not use in the kitchen. Please keep away from heat sources, avoid direct sunlight, and keep away from furniture and other household appliances 2 meters away from moisture.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaningand user maintenance shall not be made by children without supervision.

Use
Installing the device

1. Unpack the device and remove the packing materials from the device. Store the packing materials for possible future transportation.
2. Plug de power cord in a wall outlet. You will hear a beep and the power indicator will blink.
3. Press the power button to switch on the device and the display will light up.

Installing the remote control

1. Remove the screw from the lid
2. Place the batteries according to the instructions inside the hatch with the correct polarity
3. Close the lid and screw

Please note:

• Only use 2x AAA LR03 1.5V batteries
• Non-rechargeable batteries are not to be recharged
• Different types of batteries or new and used batteries are not to be mixed
• Exhausted batteries are to be removed from the remote controller and safely disposed of
• If the remote controller is to be stored unused for a long period, the batteries should be removed
• The supply terminals are not to be shortcircuited.

Filling the water tank
Note: Always remove the plug when filling the water tank. Preferably use clean tap- or distilled water to prevent bacteria and scale inside the water tank.
Warning: Only fill with cold or lukewarm water. Hot or boiling water will damage the device.

Please add water to the water tank before using the device according to the steps below:

1. Remove the power plug and take off the lid on the top side;
2. Fill the water tank with water using a watering can or container (do not exceed the transparent water inlet cover)
3. Place back the top cover and make sure it fits properly. You may now switch on the device.
   Note: When using the device for the first time, the water may have a slight smell and discoloration. This is normal and not harmful for your health.
   Tip: We recommend to use distilled water to prevent the growth of scale inside the water tank.

Maintenance

Important: Be sure to remove the power plug from the outlet before carrying out maintenance.
Important: Do not soak or immerse the power plug or the device in water.
Important: We recommend daily maintenance to prevent the growth of bacteria and scale inside the water tank.

Water replacement
In order to maintain the best performance of the humidifier, the water in the water tank and the water tank itself should be cleaned regularly;

Cleaning

• Please use a soft cloth to wipe the dust on the body; If the surface is too dirty, it is better to wipe it clean with a damped cloth mixed with neutral detergent.
• Do not use chemical solvents, gasoline, polishing powder, etc. to clean the surface of the device. Do not place the device or any of it’s parts in the dishwasher to clean. It is best to clean it with clean water.
• Please use a soft cloth to clean the parts (see image) regularly. If the regular cleaning can’t remove the scale on the inside of the water tank, mix some lemon vinegar with lukewarm water (water and lemon vinegar ratio 10ml:1g) Pour everything into a large container and let it soak for 5 minutes. Then gently scrub the scale surface with a soft brush until the scale is removed.
  

Storage
When the appliance is not used for a long time, please clean all the components, dry them, and put them into the original box and store them in a dry place.

Spare parts
Spare parts and accessories can be requested at the point of purchase or local distributor.

Functions

Control panel / remote control

Display

Power
Press the power button to switch on the device. The corresponding indicator will light up on the display and the ambient light will switch on. The WIFI indicator will blink to look for devices to pair. The monitoring screen will show the actual temperature and humidity every 5 seconds. Press again to switch off the device (the device will remain in stand-by mode until the plug is removed from the wall outlet). The default humidity setting is MEDIUM output.

Note: you can also switch on the device with the touch button on the device, located behind the control panel / remote control.

 Increase / decrease mist output
Press the button increase the mist output. The mist output level bars will change accordingly. Pressing the button will decrease the mist output. The are three mist output levels.
LOW , MEDIUM , HIGH

Note: The mist output setting will not cycle when pressing or button multiple times.

Auto mode
Press the button to activate the self-regulating hygrostat. The mist output intensity will now self-regulate according to the ambient relative humidity. Press multiple times to change the desired humidity in the following order: 40% > 45% > 50% > 55% > 60% > 65% > 70% > 75% > 80% > 85% > 90% > ACTUAL HUMIDITY > 40% > 50% > … and so on. Each press will increase with 5%. Once released, the selected humidity will blink 3 seconds to confirm your choice.

When the hygrostat is set above the actual humidity, the device will operate in high speed until the desired humidity has been reached. When the hygrostat is set below the actual humidity, the device will not humidify. After setting the hygrostat, the display will show the ambient relative humidity.

Timer
Press the key to activate the timer setting. With every touch the timer will increase with one hour in the following sequence: 1h > 2h > 4h > 8h > OFF. Once the timer is activated, the device will automatically shut down after the set timer has been completed.

Ambient light
Press the button to active the ambient light. Press again to deactivate.

WIFI mode
Press and hold the button for 5 seconds to activate the WIFI mode. The indicator will quickly disappear and then flash rapidly (searching for devices to pair)

WIFI and APP operation
Scan below QR code to download the Duux APP or search DUUX APP in the App Store or Google Play Store to start the procedure to download the APP. Once installed, enter your e-mail address and complete the registration.

https://apps.apple.com/app/duux/id1474620119
APP STORE

https://play.google.com/store/apps/details?id=com.duux.control
PLAY STORE

Connect to WIFI

1. Once registered, click “add duux device” on the main screen or use the “+” button in the top right corner to add a new device.,
2. Search for “Beam” and press to continue
3. Connect to your preferred WiFi network and enter the corresponding password
4. Follow the instructions in the app to complete the pairing process.

Display icons

Power
When the indicator on, the device is switched on. If it blinks, the device is in stand-by mode

Water replacement indicator
When the indicator flashes red, it indicates that there is water shortage. Please remove the top cover and add water.

Auto mode
When this indicator light is on, it means the humidifier is operating in AUTO mode.

Mist output level bars
The amount of bars determine the mist output intensity set in manual operation mode. There are three mist output levels:
LOW , MEDIUM , HIGH

WIFI indicator
When the indicator light blinks, it means it’s idle and looking for a device to pair. If it’s solid, it means the device is connected. Press and hold the button for 5 seconds to cancel the pairing operation.

Timer indicator
When the indicator lights up, it means you have entered the timer mode. Below you will see the number (1, 2, 4 or 8H) of hours on which the timer is activated.

Display brightness
The display will automatically dim after the last touch or press.

Water shortage
If there is no water remaining in the water tank, a beep will sound 3 times, and the water shortage icon will automatically return to the standby state after flashing 50 times.

Aroma tray/sponge
Below the top cover you will find a small handle which hides the aroma tray. Lift the handle to release the tray and pour a few drops of aromatherapy on the sponge. Place back the aroma tray and top cover to continue the operation.

Note: Only use aromatherapy that is suitable for ultrasonic humidifiers. Other types of aromatherapy may damage the device.

Control panel / remote control
The control panel is integrated in the remote control. When not in use, we recommend placing the remote control back in the holder on the device. Remote control batteries are included (type: AAA). Please note the polarity when inserting the batteries.

The smart and powerful humidifier with minimal footprint

Technical specifications

The appearance and specification of the device may be changed without notice.

FAQ

Q. The power/water supply indicator does not light up and mist does not come out.
A. Insert the power plug all the way to the back of the socket or check if there is a power cut.
Q. The power/water supply indicator is red and the power is off, even though the power button is pushed.?
A. There is not enough water. Please fill the water tank with water.
Q. Strange noises accompany the use of the product.
A “burbling” sound comes out of the main body. This sound is the sound of water being supplied from the water tank to the main body and does not mean the product is defective.
Q. A strange noise can be heard from the removed water tank.
A. When you remove an empty or nearly-empty water tank from the main body, an abnormal sound from the water tank can be heard. This sound is related to pressure within the water tank and does not mean the product is defective.
Q. Mist can’t be seen even when the power is connected.
A. – Is the power/water supply display flashing red? There is insufficient water, if it is flashing red. Please fill the water tank with water. – The mist may not be visible depending on the balance between the room temperature and humidity.
Q. The floor is wet / There is a water leakage. A. Is the floor wet due to excessive humidity?
– Wet floors from mist can occur due to the room environment and conditions of use. Please switch the mist volume to minimum output or AUTO mode.

Disposal
The European directive 2012 / 19 / CE on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed in the normal unsorted municipal waste stream. Old appli-ances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

References

• Duux | Designed for better air.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>