BLAUPUNKT SJV801 Slow Juicer Instruction Manual

June 5, 2024
Blaupunkt

BLAUPUNKT SJV801 Slow Juicer Instruction Manual

Instruction manual

SJV801

Important notes

  • To achieve the utmost in enjoyment and performance, and in order to become familiar with its features, please read this manual carefully before attempting to operate this product.

  • Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.

  • This device is for domestic use only. Do not use for any other purposes.

  • The device should only be connected to an earthed socket with values corresponding to the values on the rating label.

  • It is necessary to check, if total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.

  • If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards.

  • Make sure the cable is grounded, 3-cores with a socket and an earth cable.

  • Do not let cord hang over edge of counter, or touch any hot surface.

  • The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.

  • Before maintenance work always disconnect the unit from the power supply.

  • When unplugging the power cord from electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord.

  • Damage to the power cord or plug can lead to an electrocution hazard.

  • Never leave the product connected to the power source without supervision.

  • Never put the power cable, the plug or the whole device into the water or any other liquids.

  • The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.

  • Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.

  • The appliance must not be used by children. Keep theappliance and its cord out of the reach of children.

  •  The appliance may be used by individuals with limited physical, sensory or mental capability as well as those without knowledge of or previous experience in the use of similar appliances, provided such individuals are supervised or instructed with regard to the safe operation of the appliance and are informed about the potential hazards.

  • Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.

  • Never use the product close to combustibles.

  • Never expose the product to atmospheric conditions such as direct sun light or rain, etc … Never use the product in humid conditions (like bathroom or camping house).

  • The power cable should be periodically checked for damage. · If the power cable is damaged the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising.

  • Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product by yourself as it can lead to electric shock. Always return the damaged device to a professional service in order to repair it.

  • All the repairs should only be performed by authorized service professionals. Any attempted unauthorised repairs performed can be a hazard to the user.

  • Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may
    render the device unsafe for use.

  • Do not attempt to juice any hard materials, large seeds (seeds which cannot be swallowed or chewed), pits, ice or frozen foods.

  • Before each use, check out the juicer’s filter. If you see any cracks or damage, do not use the device.

  • During operation, do not put your hands or any objects into feeder. To push fruits, use only the pusher.

  • Fruits should be put into feeder during operation, you cannot fill feeder with fruit or vegetable at a standstill.

  • Be careful not to overload the juicer, do not use too much force to push products through the feeder.

  • Do not operate with an empty bowl.

  • Do not disassemble the juicer if it is plugged into a power outlet.

  • Do not operate the Juicer continuously more than 20 minutes with any loading. Wait about 30 minutes before next

use.

  1. Take particular care when fitting or removing the food processor blades. They are very sharp.

Device is compliant with EU directives:

  • Low voltage directive (LVD)
  •  Electromagnetic compatibility (EMC) Device marked CE mark on rating label

Device is compliant with EU directives:

  • Low voltage directive (LVD)
  •  Electromagnetic compatibility (EMC)
    Device marked CE mark on rating label
    When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance In the common waste bin.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box),polystyrene foam (buffer) and poly ethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment

Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.’

Technical data
Power:260W
Power supply: 220-240V-50/60Hz

  1. Bowl 11. Switch (R, Off, ON)
  2. Filter’s holder 12. Ice-cream-desserts accessory
  3. Filter 13. Food processor accessory:
  4. Auger a) lid
  5. Lid b) blades
  6. Rubberpad c) collector
  7. Pulp container d) food processor internal chamber
  8. Juice container e) food processor gearbox base
  9. Pusher f) food processor pusher
  10. Cleaning brush

BEFORE FIRST USE

  1. Remove all papers, cartons, foil which secure the juicer and juicer parts.
  2. Clean the juicer following the advice in Cleaning and Maintenance chapter.
  3. It is recommended to assemble and disassemble the juicer before using.

ASSEMBLING THE JUICER AND DISASSEMBLING

Under the bowl there is a rubber pad allowing the discharge of all the juice only from the juice outlet. Before juicing, make sure the pad is plugged in completely to prevent any leakage.

  1. Place the juice bowl (1) on top of the main body, make sure the bowl is in place by inserting the pins on the main body into the 3 slots on the bowl bottom.
  2. Put the filter (3) into the filter’s holder (2).
  3. Put the filter’s holder (2) with filter(3) into the juice bowl (1 ). Besure to align the arrow on the filter (3) with the arrow on the bowl (1 ). Make sure that the teeth along the lower edge of the filter’s holder (2) fit properly into the cogwheel inside the bowl.
  4. Put the auger (4) into the filter and rotate until it falls into place.
  5. Fit the lid (5) on the bowl (1) and turn it right in position so it locks into the main body.
  6. Place the pulp container (7) so that it fits in position on the left hand side of the juicer’s main body.
  7. Place the juice cup (8) under the juicer spout.

FOOD PREPARATION

Remove stones (plums, peaches, cherries etc).
Remove tough skins (melons, pineapples, cucumbers, potatoes etc).
Soft-skinned and other foods just need washing.
Cut the food into smaller pieces to fit the feed tube.

USING THE DEVICE

Switch on, put some fruits and vegetables into the feeder and push down with the pusher.
Use reverse (R) function only when food get stuck. Do not turn the switch quickly from ON to R, but wait a few seconds in the OFF position.
Some very hard foods may make your juicer slow down or stop. If this happens switch off and unblock the filter. Insert soft food slowly to getthe most juice.
Some fruits and vegetables may block filter during work which cause decrease of the juicing efficiency.
If you observe that during work, efficiency is getting to low, cleaning of filter is needed.

CLEANING AND MAINTENANCE

For easy cleaning – immediately after each use rinse removable parts under running water (to remove wet pulp). Allow parts to dry.
After disassembling the unit all removable parts may be washed in hot soapy water.
The lid, bowl, pulp container,juice cup are dishwasher safe.
Wipe the motor base with a damp cloth.
Always treat the filter (3) with care as it can be easily damaged.
If pulp is left to dry on the filter it may clog the fine pores of the filter mesh thereby lessening the effectiveness of the juicer

HOW TO USE THE FOOD PROCESSOR ACCESSORY

Assembly:

  1. Fit the food processor base (13e) onto the body of the device.

  2. Insert the food processor internal chamber (13d) into the food processor base (13e).

  3. Place the collector (13c) onto the pin, with the oval part at the base and the multi-wall part at the top.

  4. Place the blade disc (13b) onto the collector (13c). With the double-sided disc, the upper surface will be the working surface.

  5. Close the food processor with the lid (13a) and turn the lid until it clicks into place.

  6. Fold the accessory. Connect the device to the power supply. Turn on the device with the power switch.

  7. Vegetables or fruit should be gently inserted through the feeder opening in the lid. Do not put fingers or any tools or cutlery inside the feeder. Push only using the attached pusher (13f).

  8. Switch off the device and disconnect it from the power supply when you have finished using it.
    Warning: Only change the blades when the machine is switched off and disconnected from the power supply.
    Warning: Rinse the base of the food processor only under running water. Do not immerse the part in water or wash it in a dishwasher.

HOW TO USE THE ICE-CREAM-DESSERTS ACCESSORY
Assembly:

  1.  Place the ice-cream-desserts accessory bowl (12) onto the body of the device.
  2. Insert the screw (4) into the bowl.
  3. Close the bowl using the lid (5)

Use:

  1. Fold the accessory. Connect the device to the power supply. Turn on the device with the power switch.
  2. Small, fragmented particles of frozen fruit should be gently inserted through the feeder opening  in the lid. Do not put fingers or any tools or cutlery inside the feeder. Push only using the attached pusher.
  3. Switch off the device and disconnect it from the power supply when you have finished using it.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals