MODECOM 5200C Wireless Keyboard and Mouse Set User Manual
- June 3, 2024
- MODECOM
Table of Contents
MODECOM 5200C Wireless Keyboard and Mouse Set
INTRODUCTION
MODECOM 5200C is a combo set of wireless keyboard and mouse. It is using radio Nano receiver that is working in 2.4GHz frequency. Both keyboard and mouse use the same receiver, hence only one USB port is used for working with two devices.
SPECIFICATION
Keyboard:
- Number of keys: 104
- Dimensions: (L •w• H): 435•12e•22mm
- Fen keys: 12
- Power: 2x AAA batteries 1.5V (not included)
- Power consumption: 3V — 5mA
- Weight: 420g
Mouse:
- Sensor: Optical
- Resolution (dpi): 800/1200/1600
- Dimensions: (L• w •H): 107•51•3omm
- Power: M battery 1.5V (not included)
- Power consumption: 1.5V — 13mA
- Weight: 50g
INSTALLATION
Please take the Nano receiver out of the box or the mouse (it is located under the upper casing, which must be carefully removed beforehand).
Please connect the Nano receiver to a USB port on Your computer.
In order for the set to work, you need to place 2 AAA batteries in the
keyboard (the container is on its bottom) and one M battery in the mouse (the
container is under the upper housing, which should be carefully removed
beforehand) in the appropriate direction. In both devices, you must shift the
Power switch to the “ON” position. After a while, the combo set should start
working, the LED on the keyboard (located above the battery symbol ) will
flash red for a while.
In order to change the dpi resolution in the mouse, between the available
values, press the left and right mouse buttons for 3 to 5 seconds. When the
mouse battery level is low, the LED (localed in the upper left comer next to
the Scroll wheel) will flash red.
When the keyboard battery is low, one of the keyboard LEDs (located above the
bat- tery symbol ) will flash red.
IMPORTANT:
Please use the combo set only with alkaline batteries and for its intended
purpose. If the combo set is not used for an extended period of time, please
remove the batteries. Keep away from children.
This device was designed and made of high-quality rues able materials and
components. If the device, its packaging, user’s manual, etc. are marked with
crossed waste container, ii means they are subject to segregated household
waste collection in compliance with the Directive 2012/19/UE of
the European Parliament and of the Council. This marking informs that electric
and electronic equipment sham not be thrown fame together with household waste
after it’s been utilized. The user is obliged to bring the utilized equipment
to electric and electronic waste collection point. Those running such
connection points, including local connection points, shops or commune units,
provide convenient system enabling to scrap such equipment. Appropriate waste
management aids in avoiding consequences which are harmful for people and
environment and result from dangerous materials used in the device, as well as
improper storage and processing. Segregated household waste collection aids
recycle materials and components of which the device was made. A household
plays crucial role in contributing to recycling and reusing the waste
equipment. This is the stage where the basics are shaped which largely
influence the environment being our common good. Households are also one of
the biggest users of small electrical equipment. Reasonable management at this
stage aids and favors receding. In the case of improper waste management,
fixed penalties may be imposed in accordance with national legal regulations.
Hereby, MODECOM POLSKA Sp. z o. o. declares that the radio equipment type
Wireless Keyboard, Wireless mouse 5200G is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at
the following internet address: deklaracje.modecom.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>