db DRIVE DBT100v2 Receptor Bluetooth Marino User Guide
- August 13, 2024
- DB DRIVE
Table of Contents
db DRIVE DBT100v2 Receptor Bluetooth Marino
Specifications
| Parameter | Value |
|---|---|
| Power Source | 12V DC |
| Connection | Bluetooth, Auxiliary |
| Compatibility | Universal |
| Dimensions | Standard Rocker Switch Size |
Product Usage Instructions
Wiring Instructions
- Red: Connect to 12V DC power source.
- Blue: Connect to the ignition switch or accessory power source.
- Black: Connect to the ground.
- White: Connect to the amplifier remote turn-on lead.
- Green: Connect to the amplifier ground.
- Yellow: Connect to the battery positive terminal.
Contact Information
Address : DB Research 302 Hanmore Industrial Parkway Harlingen, TX 78550
Phone : 956-421-4200
Fax : 956-421-4513
Email : orders@dbdrive.net
Website : DBDrive.net
Quick Guide
Wiring Installation Instructions
-
Power (Red)
- Connect to + 12V for power
-
Ground (Black)
- Connect -12V for ground
-
Remote Out (Blue)
- Connect to amplifier Remote
- Wire to turn on the amp when the DBT1OOv2 is Powered on
-
Main Out (Black)
- Connect to input of amplifier Aux In (Black)
- Connect to an optinal auxiliary source other than Bluetooth
DBT100v2 was designed to be mounted in a standard Carling-style opening
Bluetooth Pairing Instructions
- Step1 : Turn on DBT1OOv2 by pressing power button which will illuminate in white while the moae button will be blinking Blue.
- Step2: Activate Bluetooth setting on audio device (cellphone, mp3 player, etc.}. Find and select DBT1OOv2 on list of available devices.
- Step 3: Once the Bluetooth audio source is paired with DBT1OOv2, the mode button will stop blinking and remain illuminating Blue, indicating that the pairing has successfully connected.
*Any time after initial pairing, when DBT1OOv2 is powered on and in range of paired device, it will automatically connect to the recently paired device, if it is not with any other device.
Button Functions
- Play Next Track (only in BT Mode)
- Play Previous Track (only in BT Mode)
- Select Between Aux Mode (Red), BT Mode (Blue), BT Pairing Mode (Blinking Blue)
- Power On or Off Device/ Play or Pause Track
- Volume Up
- Volume Down
302 Hanmore Industrial Parkway Harlingen, TX 78550 Phone : 956-421-4200 Fax : 956-421-4513 orders@dbdrive.net DBDrive.net
FAQ’s
Q: How do I pair the DBT100v2 with my device?
A: Press and hold the DB Drive Mode button until the LED blinks blue, indicating it is in pairing mode. Then, search for “DBT100v2” on your device and connect.Q: What do the different LED colors indicate?
A: Red indicates Aux Mode, Blue indicates BT Mode, and Blinking Blue indicates BT Pairing Mode.Q: Can I use the DBT100v2 with any amplifier?
A: Yes, the DBT100v2 is designed to be universally compatible with most amplifiers.Q: How do I reset the DBT100v2?
A: To reset, disconnect the power source for 10 seconds and then reconnect.Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>