HAMRON 601004 Engine Lift Chain Instruction Manual

HAMRON 601004 Engine Lift Chain Instruction Manual

SAFETY INSTRUCTIONS

Read the Instruction manual carefully before use

• Save these instructions for future reference.
• Replace any warning stickers that have become illegible or lost. Contact your dealer to obtain replacement stickers.

Inspection

• Before use, always make sure that no parts are damaged, missing or worn. Check for other factors that could affect operation.
• If the product has been overloaded or subjected to a shock load, it must be checked by an authorised service centre before being used again.
• Never use the product if it is damaged or worn, or if it is not functioning normally. Take it to an authorised service centre for inspection and possible repair.
• The product should be checked annually by an authorised service centre.
• Only use spare parts recommended by the manufacturer.

WARNING

• The maximum permitted load is 680 kg.
• Check that all screw connections on the product, the lifting device and the lifting device’s attachment are correctly tightened.
• Never walk or stand beneath a suspended load.
• Failure to follow all the instructions and safety instructions entails a risk of serious personal injury or death.
• Read these instructions carefully before using it.

IMPORTANT:

• Never exceed the permitted maximum load for the product.
• Never use the product if it is damaged or if it is not functioning correctly.
• Never use the product if any of the chains are twisted, folded over, damaged or worn.
• Never lift loads that do not load all the lifting chains evenly.
• Pay attention to the load and the lifting device.
• Never attempt to lift people or animals with the product.
• Never lift loads over people or animals.
• Never leave suspended loads unattended.
• Make sure that the lifting chain does not collide with any obstacles.
• During welding, ensure that the return current never passes through the chains.
• Never allow the chains to come into contact with live welding electrodes.
• Never attempt to extend or repair the chains.

IMPORTANT:

Failure to follow all the instructions and safety instructions entails a risk of serious personal injury or death. Never use the engine lift chain together with a lifting device with a lifting capacity lower than 960 kg.

TECHNICAL DATA

Maximum permitted load: 680 kg

DESCRIPTION

1. Pin bolt
2. Mounting

USE

The lift chain is intended to be used with a ceiling-mounted lifting device, for lifting irregular loads such as car engines with the gearbox installed. The product makes it easier to lift loads with a displaced centre of gravity, and allows adjustment of the angle of the load.

Before each use

• Read all the instructions and safety instructions and familiarise yourself with the product’s controls and how the product is used.
• Check that the load is securely and correctly attached.
• Always maintain a firm footing and good balance when using the product.
• Check that the load can move freely and does not collide with any obstacles.
• Tension the chains carefully and check the balance of the load. Lift a few centimetres and check the load’s attachment before continuing.
• Do not allow the load to oscillate.
• Keep onlookers at a safe distance from suspended loads.
• Warn onlookers when the load is to be moved.
• Do not expose the lifting chains to welding spatter or other contaminants.
• Check the product regularly and replace damaged and/or worn parts. Note any conducted maintenance measures.

Use

1. Remove all joints holding the engine and gearbox in place in the vehicle.
2. Hang the lift chain in the lifting device above the engine, and secure the L-shaped connectors to the ends of the chains by the engine’s cylinder head screws (one on either side at the front, one on either side at the back). Tension the chains carefully using the lifting device.
3. Lift a few centimetres and check the balance of the load.
4. Move the mounting on the lifting beam by turning the pin bolt using the handle.
5. Carefully lift out the engine and the gearbox.
6. Turn the handle to one side or the other to angle the load so that it can be removed easily.
7. Repeat the above steps in reverse order to reinstall the engine and gearbox.
8. Always check that all connections are secure and correctly tightened before lifting.

References

• Jula – products for home and garden

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>