V-TAC VT-40401ST LED Solar Streetlight Installation Guide

V-TAC VT-40401ST LED Solar Streetlight Installation Guide

INSTALLATION INSTRUCTION LED SOLAR STREETLIGHT

TECHNICAL DATA

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. This product is warranted for manufacturing defects only

This marking indicates that this product should not be disposedof with other household wastes.

WARNINGi

1. Please make sure to turn off the power before starting the
2. Installation must be performed by a qualified
3. The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
4. Replace any cracked protective
5. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a

REMOTE CONTROL

MODE FUNCTION

Mode 1: Press induction button to make it enter into sensor mode when object walk into the detective area lights turn on automatically; when object walk out of the detective area, 15 seconds later,lights keep 20% brightness.
Mode 2: Light will turn on all the time until power off or during the day.

INSTALLATION

INSTALLATION GUIDE:

1. Before installing please remove all the parts to check if all are in good condition or
2. Please makes sure the solar light is adjusted in correct angle in order to receive
3. The remote control is designed with an operation distance of 6-8m
4. The lamp comes with 3 inflated
5. Solar light cannot be installed in low-lying areas, so as not to
6. Installation can be mounted through wall or
7. After installation test the light using the remote control.

MAINTENANCE &WARNING

• Do not use solvents, petrol, Otherwise the light will be damaged.
• Clean the light with a dry, lint-free
• Check the solar panel on the back of solar light for dirt If dirt or is present remove it to guarantee flawless function of the product.
• Especially during the winter, keep the product free from snow and
• Confirm installation direction is correct (solar panel should be at top)
• Confirm no objects blocking the solar panel to receive sunlight
• Keep away from the
• Don’t immerse in the water

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

Read More About This Manual & Download PDF:

References

• TAC.EU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>