MEAN WELL ENC-180 Series 180W Programmable Desktop Type Battery Charger User Guide

June 4, 2024
MEAN WELL

MEAN-WELL-LOGO

MEAN WELL ENC-180 Series 180W Programmable Desktop Type Battery Charger

MEAN-WELL-ENC-180-Series-180W-Programmable-Desktop-Type-Battery-
Charger-PRODUCT

**Features

**

  • Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)
  • Built-in 3 stage programmable charging curve
  • Universal AC input/ Full range
  • Built-in active PFC function
  • Fanless design, cooling by free air convection
  • Built-in temperature compensation function
  • Protection: Short circuit/ Over voltage /Over temperature/
  • Battery under voltage/ Battery over voltage / Battery reverse polarity protection
  • 3 years warranty

Description

ENC-180 is a single output 180W AC/DC desktop type charger with 3 stage charging curve. In addition to the embedded pre-defined charging curves, the default curve is programmable and thus able to accommodate different types of batteries, such as lead-acid batteries (gel, flooded and AGM) and li-ion batteries (lithium iron and lithium manganese). With the rugged mechanical design along with the high-efficiency circuitry, ENC-180 operates for the ambient temperature range -30~+70’C under free air convection.

Model Encoding

MEAN-WELL-ENC-180-Series-180W-Programmable-Desktop-Type-Battery-Charger-
FIG-5

Applications

  • Radio system backup solution
  • Electric scooter charger
  • Surveillance system

GTIN CODE

MW Search: htps:/www.meanwell.com/serviceG|T|IN.asDX

QR

  • User’s Manual
  • VideoMEAN-WELL-ENC-180-Series-180W-Programmable-Desktop-Type-Battery-Charger-FIG-2

Product FrontMEAN-WELL-ENC-180-Series-180W-Programmable-Desktop-Type-
Battery-Charger-FIG-3
Product BackMEAN-WELL-ENC-180-Series-180W-Programmable-Desktop-Type-Battery-
Charger-FIG-4

Specification

MEAN-WELL-ENC-180-Series-180W-Programmable-Desktop-Type-Battery-Charger-
FIG-13
MEAN-WELL-ENC-180-Series-180W-Programmable-Desktop-Type-Battery-Charger-
FIG-14

Block Diagram

MEAN-WELL-ENC-180-Series-180W-Programmable-Desktop-Type-Battery-Charger-
FIG-6

Derating Curve

MEAN-WELL-ENC-180-Series-180W-Programmable-Desktop-Type-Battery-Charger-
FIG-7

Static Characteristics

MEAN-WELL-ENC-180-Series-180W-Programmable-Desktop-Type-Battery-Charger-
FIG-8

Function Manual

  1. Charging Curve
    • This series provides a3 stage charging. The default curve is programmable, whereas other pre-defined curves can be activated by the means of the DIP switch; please refer to the table below and the Mechanical Specification.
    • To accommodate the parameters of the charging curve, SBP-001, the smart battery charging programmer designed by MEAN WELL, and a personal computer are needed. Please contact MEAN WELL for details.
    • Default 3 stage charging curveMEAN-WELL-ENC-180-Series-180W-Programmable-Desktop-Type-Battery-Charger-FIG-9
    • Suitable for lead-acid batteries (flooded, Gel and AGM) and Li-ion batteries (lithium iron and lithium manganese).
    • Embedded 3 stage charging curve
      MODEL| Description| CC(default)| Vboost| Vfloat
      ---|---|---|---|---

12V

| Default, programmable|

12A

| 14.4| 13.8
Pre-defined, gel batter| 14| 13.6
Pre-defined, flooded battery| 14.2| 13.4
Pre-defined, AGM battery| 14.5| 13.5

24V

| Default, programmable|

6A

| 28.8| 27.6
Pre-defined, gel battery| 28| 27.2
Pre-defined, flooded battery| 28.4| 26.8
Pre-defined, AGM battery| 29| 27

48V

| Default, programmable|

3A

| 57.6| 55.2
Pre-defined, gel battery| 56| 54.4
Pre-defined, flooded battery| 56.8| 53.6
Pre-defined, AGM battery| 58| 54
2. Front Panel LED Indicators & Corresponding Signal at Function Pins
LED| Description
---|---
Green| Float (stage 3)
Orange| Charging (stage 1 or stage 2)

Mechanical Specification

MEAN-WELL-ENC-180-Series-180W-Programmable-Desktop-Type-Battery-Charger-
FIG-10

Terminal Pin No. Assignment (TB1):

Pin No. Assignment
1,2 +V
3,4 -V

Note: Please use wires with a cross section of 0.5 – 4.0 mm (12~20AWG) for connection. Recommended wires strip length is 9 mm and screw torque is 4.0 lb-inch (0.4~0.5Nm).
DIP SW:

1 2 Description
OFF OFF Default, programmable
ON OFF Pre-defined, Gel battery
OFF ON Pre-defined, flooded battery
ON ON Pre-defined, AGM battery

Connector Pin No. Assignment (CN31):
HRS DF11-6DP-2DS or equivalent

Pin No. Assignment Mating Housing Terminal
1 Prog- +3.3V

HRS DF11-6DS

or equivalent

|

HRS DF11-**SC

or equivalent

2| Prog- GND
3| Prog- RX
4| Prog- TX
5| RTH+
6| RTH-

Accessory List

Item Quantity
1 NTC sensor wire
2 NTC mating wire

NTC sensor wireMEAN-WELL-ENC-180-Series-180W-Programmable-Desktop-Type-
Battery-Charger-FIG-11
NTC mating wireMEAN-WELL-ENC-180-Series-180W-Programmable-Desktop-Type-
Battery-Charger-FIG-12

Documents / Resources

| MEAN WELL ENC-180 Series 180W Programmable Desktop Type Battery Charger [pdf] User Guide
ENC-180 Series, 180W Programmable Desktop Type Battery Charger, ENC-180 Series 180W Programmable Desktop Type Battery Charger, Programmable Desktop Type Battery Charger, Desktop Type Battery Charger, Battery Charger
---|---
| MEAN WELL ENC-180 Series 180W Programmable Desktop Type Battery Charger [pdf] Owner's Manual
ENC-180 Series 180W Programmable Desktop Type Battery Charger, ENC-180 Series, 180W Programmable Desktop Type Battery Charger, Programmable Desktop Type Battery Charger, Desktop Type Battery Charger, Type Battery Charger, Battery Charger, Charger

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

MEAN WELL User Manuals

Related Manuals