SILVERSTONE FARA B1 V2 Sleek Tempered Glass Mid-Tower Atx Chassis Installation Guide

June 5, 2024
SilverStone

SILVERSTONE FARA B1 V2 Sleek Tempered Glass Mid-Tower Atx Chassis

SILVERSTONE-FARA-B1-V2-Sleek-Tempered-Glass-Mid-Tower-Atx-Chassis-
prod

Accessory Content

Motherboard-support

Graphics card, 3.5″ HDD

Mounting for 2.5″ SSD, motherboard

Bunch wiretaps for cable management

Install standoff

Installation Guide

Remove side panelsSILVERSTONE-FARA-B1-V2-Sleek-Tempered-Glass-Mid-Tower-
Atx-Chassis-fig-6

Install motherboardSILVERSTONE-FARA-B1-V2-Sleek-Tempered-Glass-Mid-Tower-
Atx-Chassis-fig-7

Support up to 161mm heightSILVERSTONE-FARA-B1-V2-Sleek-Tempered-Glass-
Mid-Tower-Atx-Chassis-fig-8

Install Power SupplySILVERSTONE-FARA-B1-V2-Sleek-Tempered-Glass-Mid-
Tower-Atx-Chassis-fig-9

Install graphics cardSILVERSTONE-FARA-B1-V2-Sleek-Tempered-Glass-Mid-
Tower-Atx-Chassis-fig-10

Install 3.5” and 2.5” devices into the drive trays, then insert them into the bottom drive cageSILVERSTONE-FARA-B1-V2-Sleek-Tempered-Glass-Mid-Tower-
Atx-Chassis-fig-11

There are two positions to install the drive cageSILVERSTONE-FARA-B1-V2
-Sleek-Tempered-Glass-Mid-Tower-Atx-Chassis-fig-12

Install 2.5″ devicesSILVERSTONE-FARA-B1-V2-Sleek-Tempered-Glass-Mid-
Tower-Atx-Chassis-fig-13 Installation completeSILVERSTONE-FARA-B1-V2-Sleek-Tempered-
Glass-Mid-Tower-Atx-Chassis-fig-14

Install fansSILVERSTONE-FARA-B1-V2-Sleek-Tempered-Glass-Mid-Tower-Atx-
Chassis-fig-15

Install radiatorsSILVERSTONE-FARA-B1-V2-Sleek-Tempered-Glass-Mid-Tower-
Atx-Chassis-fig-16

Front I/O portSILVERSTONE-FARA-B1-V2-Sleek-Tempered-Glass-Mid-Tower-Atx-
Chassis-fig-17

Component Restrictions

Top mounted radiator restrictionsSILVERSTONE-FARA-B1-V2-Sleek-Tempered-
Glass-Mid-Tower-Atx-Chassis-fig-18

Front-mounted radiator restrictionsSILVERSTONE-FARA-B1-V2-Sleek-Tempered-
Glass-Mid-Tower-Atx-Chassis-fig-19

Warranty terms & conditions

Warranty terms & conditions

  1.  Product component defects or damages resulting from defective production is covered under warranty. Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.

  2. Usage in accordance with instructions provided in the manual, with no misuse, overuse, or other inappropriate actions*.

  3.  Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)

  4.  Product is not modified or components replaced resulting in out-of-spec. operation.

  5.  Loss or damages resulting from conditions other than ones listed above are not covered under warranty.

  6.  Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of the product.

  7.  Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty, contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.

  8.  The warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second-hand purchaser
    You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.

  9.  If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone http://www.silverstonetek.com. Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping (or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping (or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website. Please visit http://www.silverstonetek.com for the latest updates.

Additional info & contacts
For North America support(at)silverstonetek.com SilverStone Technology in North America may repair or replace the defective product with a refurbished product that is not new but has been functionally tested. A replacement product will be warranted for the remainder of the warranty period or thirty days, whichever is longer. All power supplies should be sent back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate the RMA procedure with SilverStone Technology in USA by first downloading the “USA RMA form for end-users” form from the below link and follow its instructions. http://silverstonetek.com/contactus.php

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

SilverStone User Manuals

Related Manuals