SILVERSTONE ECS07 6Gbps Non-RAID M.2 PCIe Storage Expansion Card Installation Guide
- June 4, 2024
- SilverStone
Table of Contents
SILVERSTONE ECS07 6Gbps Non-RAID M.2 PCIe Storage Expansion Card
Installation Guide
Connect SATA cable to ECS07
Install ECS07 on to the motherboard’s PCIe M.2 slot, the included spacer can
be installed on the base to increase stability as required.
Remark
- If the M.2 slot of the motherboard is next to the PCIe slot, the base or the heatsink could be removed as needed if an interference occurs.
Connect the SATA cable to either the base of ECS07 or the hard drive.
SilverStore Technology Co., Ltd.
www.silverstonetek.com
support@silverstonetek.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>