BRESSER 1023938-17-2023 Thermo-Hygrometer DCF Climate Monitor Instruction Manual

: October 30, 2023
: BRESSER

BRESSER 1023938-17-2023 Thermo-Hygrometer DCF Climate Monitor

BRESSER-1023938-17-2023-Thermo-Hygrometer-DCF-Climate-Monitor-
product

Product Information

Climate Monitor

The Climate Monitor is a device designed to measure and monitor the temperature and humidity levels in a room or other indoor space.
The device contains electronic parts that are powered by an AC adapter and/or batteries.
The product is manufactured by Bresser GmbH and can be found on their website.

General Safety Instructions

It is important to observe the following safety instructions when using the Climate Monitor:

Read the safety instructions and the instruction manual carefully before using the device.
Keep the instruction manual in a safe place for future reference.
If the device is sold or passed on, the instruction manual must be passed on to any subsequent owner/user of the product.
Improper use of this product may result in suffocation, especially for children.
Improper use of this product may result in electric shock.
Electric shock can cause serious or fatal injuries.
Improper use of this product may result in fire. It is essential that you observe the following safety information in order to avoid fires.

Product Usage Instructions

To use the Climate Monitor, follow these steps:

Ensure that the device is connected to a power source using the AC adapter or batteries.
Turn on the device by pressing the power button.
The device will display the current temperature and humidity levels in the room or indoor space.
You can set temperature and humidity alerts by accessing the settings menu. Consult the instruction manual for more information on how to access and use the settings menu.
The Climate Monitor can be mounted on a wall or placed on a flat surface using the included stand.
Regularly check the device to ensure that it is functioning properly and displaying accurate temperature and humidity readings.

Visit our website via the following QR Code or web link to find further information on this product or the available translations of these instructions. BRESSER-1023938-17-2023-Thermo-Hygrometer-DCF-Climate-Monitor-
fig-1

www.bresser.de/P7000016000000

Imprint
Bresser GmbH
Gutenbergstr. 2
46414 Rhede
Germany
www.bresser.de
For any warranty claims or service inquiries, please refer to the information on “Warranty” and “Service” in this docu-mentation. We ask for your understanding that unsolicited returns cannot be processed.
Errors and technical changes excepted.
© 2022 Bresser GmbH
All rights reserved.
The reproduction of this documentation – even in extracts -in any form (e.g. photocopy, print, etc.) as well as the use and distribution by means of electronic systems (e.g. image file, website, etc.) without the prior written permission of the manufacturer is prohibited.
The designations and brand names of the respective com-panies used in this documentation are generally protected by trade, trademark and/or patent law in Germany, the European Union and/or other countries.

Validity note

This documentation is valid for the products with the follow-ing article numbers: 7000016000000
Manual version: 0123
Manual designation:
Manual_7000016000000_Climate-Monitor_en de_BRESSER_v012023a
Always provide information when requesting service.

About this Instruction Manual

NOTICE

These operating instructions are to be considered a component of the device.
Read the safety instructions and the instruction manual carefully before using this device.
Keep these instruction manual in a safe place for future ref-erence. If the device is sold or passed on, the instruction manual must be passed on to any subsequent owner/user of the product.

General safety instructions

DANGER

Danger of suffocation!
Improper use of this product may result in suffocation, es-pecially for children. It is therefore imperative that you ob-serve the following safety information.
Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a danger of choking!
This product contains small parts that can be swal-lowed by children! Choking hazard!

DANGER

Risk of an electric shock!
This device contains electronic parts that are powered by a power source (AC adapter and/or batteries). Improper use of this product may result in electric shock. Electric shock can cause serious or fatal injuries. It is therefore imperative that you observe the following safety information.
Never leave children unattended when handling the device! Follow the instructions carefully and do not at-tempt to power this device with anything other than power sources recommended in this instruction manual, otherwise there is a danger of an electric shock!
DANGER Explosion hazard!
Improper use of this product may result in fire. It is essen-tial that you observe the following safety information in or-der to avoid fires.
Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire! Ex-cessive heat or improper handling could trigger a short-circuit, a fire or an explosion!

NOTICE

Danger of material damage!
Improper handling may result in damage to the unit and/or accessories. Therefore, use the device only in accordance with the following safety information.
Do not disassemble the device! In the event of a defect, please contact your dealer. They will contact the Service Center and can arrange the return of this device for re-pair if necessary.
Do not immerse the unit in water!
Do not expose the device to impacts, vibrations, dust, constant high temperatures or excessive humidity. This can result in malfunctions, short-circuits or damage to the batteries and components.
Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from dif-ferent brands or types or with different capacities. Re-move batteries from the device if it is not to be used for a longer period of time!
Do not use rechargeable batteries (accumulators).

NOTICE

Risk of voltage damage!
The manufacturer is not liable for damage related to im-properly installed batteries!

Parts overview and scope of delivery

BRESSER-1023938-17-2023-Thermo-
Hygrometer-DCF-Climate-Monitor-fig-2

Illustration 1: All parts of the thermo-hygro sensor

Housing
Display
RCC button
[DOWN] button
Wall mount fixture
[UP] button
[SET] button
Ventilation slots
Stand, fold-out
Battery compartment with cover
- Scope of delivery:
- 3 x Thermo-hygrometer (A)
- Also required (not included in delivery): 3 x AAA/LR03 type battery
- Screen display
- Illustration 2: Display indications for the thermo-hygrometer
AM/PM information
- (only in 12-hour time mode)
Climate indicator
Temperature (°C or °F selectable)
Humidity ( in %)
The symbol for daylight saving time (only for summertime)
Time (hours: minutes)
RCC symbol (only when the radio-controlled clock is enabled)

Setting up power supply

Remove the battery compartment cover.
Insert battery(ies) into the battery compartment. En-sure that the battery polarity (+/-) is correct.
Replace the battery compartment cover.

Automatic time setting

After the power has been restored, the unit automatically searches for the radio signal. It takes approximately 3-8 minutes for this process to be completed.
If the radio signal is correctly received, the date and time are set automatically and the reception symbol is displayed.
If no radio signal has been received, proceed as follows:

Press the RCC button for approx. 2 seconds to initiate the reception of the radio signal again.
If still no radio signal is received, the time must be set manually.
To deactivate automatic reception of the time, press and hold the RCC key for approx. 3 seconds.

Manual time adjustment

In normal display mode, press the SET button for about 3 seconds to enter the time settings mode.
Digits to be set are flashing.
Press UP or DOWN button to change the value.
Press the SET button to confirm and switch to the next setting.
Sequence of the settings: Time offset > Hours > Minutes > Year > Month > Day
Finally, press the SET button to save the settings and exit settings mode.

NOTICE! For more information on the time display in 12- or 24-hour mode, see the chapter “Changing the display”.

Automatic measurement display

Once the power is established, the readings for the current environment are displayed on the unit.

Clima indicator

DRY: dry (humidity <40%)
COMFORT: Optimal (humidity between 40% and 70%)
WET: Humid (humidity 70%)

The climate indicator is a visual display based on air temper-ature and humidity to determine the level of comfort.

Note:

The comfort display may vary at the same temperature, depending on the humidity.

Display change

In normal display mode, press the SET button to switch between time and date.
In normal display mode, press the DOWN button to toggle between °C and °F when displaying the temper-ature unit.
In the normal display mode, press the UP key to switch between the 12-hour and 24-hour time display.

Disposal

Dispose of the packaging materials according to its type. In-formation on proper disposal can be obtained from the muni-cipal waste disposal service provider or environmental agency.
Do not dispose of electronic devices in the household garbage!
According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its transposition into national law, used electrical equipment must be collected sep-arately and recycled in an environmentally sound manner.
Batteries and rechargeable batteries must not be disposed of with household waste. You are legally obliged to return used batteries and accumulators and can return them after use either at our sales outlet or in the immediate vicinity (e.g. in the trade or in municipal collection points) free of charge.
Batteries and accumulators are marked with a crossed-out dustbin and the chemical symbol of the pollutant, “Cd” stands for cadmium, “Hg” stands for mercury and “Pb” stands for lead.

EC declaration of conformity

Bresser GmbH hereby declares that the radio equipment type with item number 7000016000000 is in compliance with Directive 2014/53/EU. The full text of the EC Declaration of Conformity is available at the following web address:
www.bresser.de/download/7000016000000/CE/7000016000000_CE.pdf

UKCA declaration of conformity

A “Declaration of Conformity” in accordance with the applicable directives and relevant standards has been issued by Bresser GmbH The full text of the UKCA Declaration of Conformity is available at the following web address: www.bresser.de/download/7000016000000/UKCA/7000016000000_UKCA.pdf
Bresser UK Ltd. • Suite 3G, Eden House, Enterprise Way, Edenbridge, Kent TN8 6HF, Great Britain

Technical data

Power supply: 1x AAA/LR03 battery
Temperature unit: °C or °F are selectable
Temperature display range: -9.9°C to +50°C
Humidity display range: rH 1% to 99%

Warranty

The regular warranty period for this product is 5 years and starts on the day of purcha-se. Please keep the proof of purchase (receipt/invoice) carefully as proof of purchase. During the warranty period, defective devices will be accepted by your local specialist store. Alternatively, you can contact the service center by email at service@bresser.de. Here you can find detailed information about a possible return. In the event of a war-ranty claim, you will always receive a new or repaired device back free of charge. It is up to the guarantor to decide whether to repair or replace the device.
The guarantee expires if defects in the object of purchase are due to the following circumstances:
improper usage
negligent or intentional damage through own fault and/or unauthorized third parties
negligent or intentional damage by the buyer and/or third parties
Repairs or alterations carried out by third parties without our order
Changes or damage due to force majeure (storm, hail, fire, power failure, lightning, flooding, snow damage, frost, and other effects caused by animals, etc.)
The warranty is also void if a damaged and/or illegible or incomplete proof of purchase is presented.
Statutory warranty claims, the claim of which is free of charge, remain unaffected. The guarantor is BRESSER GmbH, Gutenbergstr. 2, 46414 Rhede, Germany.
After the warranty period has expired, you also have the option to send a defective device for repair. Repairs, after the warranty period has expired, are chargeable. You will receive a cost estimate from us before carrying out the repair.
In case of a return, please note the following:
Before returning an item, please contact the service center via our service@bresser.de email! Make sure the item is shipped carefully packaged. If possible, use the original packaging. Fill out the return form below and include it with a copy of the purchase receipt with the shipment. Unfree shipments cannot be accepted!
Service point: Bresser GmbH
Returns Processing Gutenbergstr. 2 D – 46414 Rhede Germany
dependent on the product being returned your dealer may receive a returns notification

Service

Please contact the service center first for any questions regarding the product or claims, preferably by e-mail.
E-Mail: service@bresseruk.com
Telephone*: +44 1342 837 098
BRESSER UK Ltd.
Suite 3G, Eden House
Enterprise Way
Edenbridge, Kent TN8 6HF
Great Britain
Number charged at local rates in the UK (the amount you will be charged per phone call will depend on the tariff of your phone provider); calls from abroad will involve higher costs.
Bresser GmbH
Gutenbergstraße 2
46414 Rhede · Germany
www.bresser.de
@BresserEurope

Documents / Resources

| BRESSER 1023938-17-2023 Thermo-Hygrometer DCF Climate Monitor [pdf] Instruction Manual
1023938-17-2023 Thermo-Hygrometer DCF Climate Monitor, 1023938-17-2023, Thermo-Hygrometer DCF Climate Monitor, Hygrometer DCF Climate Monitor, DCF Climate Monitor, Climate Monitor, Monitor
---|---