BRESSER MeteoTemp W – DCF RC Weather Station Instruction Manual

Meteo Temp W – DCF RC Weather Station
Instruction Manual
Weather Station

MeteoTemp W – DCF RC Weather Station

Visit our website via the following QR Code or web link to find further information on this product or the available translations of these instructions.

www.bresser.de/P7004210

WARRANTY

www.bresser.de/warranty_terms

RECYCLAGE (TRIMAN/FRANCE)

Imprint

Bresser GmbH
Gutenbergstr. 2
46414 Rhede
Germany
www.bresser.de
For any warranty claims or service inquiries, please refer to the information on “Warranty” and “Service” in this documentation. We ask for your understanding that unsolicited returns cannot be processed.
Errors and technical changes excepted.
© 2022 Bresser GmbH
All rights reserved.
The reproduction of this documentation – even in extracts in any form (e.g. photocopy, print, etc.) as well as the use and distribution by means of electronic systems (e.g. image  file, website, etc.) without the prior written permission of the manufacturer is prohibited.
The designations and brand names of the respective companies used in this documentation are generally protected by trade, trademark and/or patent law in Germany, the European Union and/or other countries.

Validity note

This documentation is valid for the products with the following article numbers:
7004210
Manual version: 1222
Manual designation:
Manual_7004210_Meteo-Temp-W_de-en-fr-nl-ites_BRESSER_v122022a
Always provide information when requesting service.

About this Instruction Manual

NOTICE
These operating instructions are to be considered a component of the device.
Read the safety instructions and the instruction manual carefully before using this device.
Keep these instruction manual in a safe place for future reference. If the device is sold or passed on, the instruction  manual must be passed on to any subsequent owner/user of the product.

General safety instructions

DANGER
Danger of suffocation!
Improper use of this product may result in suffocation, especially for children. It is therefore imperative that you observe the following safety information.

• Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a danger of choking!
• This product contains small parts that can be swallowed by children! Choking hazard!

DANGER
Risk of an electric shock!
This device contains electronic parts that are powered by a power source (AC adapter and/or batteries). Improper use of this product may result in electric shock. Electric shock can cause serious or fatal injuries. It is therefore imperative that you observe the following safety information.

• Never leave children unattended when handling the device! Follow the instructions carefully and do not attempt to power this device with anything other than power sources recommended in this instruction manual, otherwise there is a danger of an  electric shock!

DANGER
Explosion hazard!
Improper use of this product may result in fire. It is essential that you observe the following safety information in order to avoid fires.

• Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire! Excessive heat or improper handling could trigger a short-circuit, a fire or an explosion!

NOTICE
Danger of material damage!
Improper handling may result in damage to the unit and/or accessories. Therefore, use the device only in accordance with the following safety information.

• Do not disassemble the device! In the event of a defect, please contact your dealer. They will contact the Service Center and can arrange the return of this device for repair if necessary.
• Do not immerse the unit in water!
• Do not expose the device to impacts, vibrations, dust, constant high temperatures or excessive humidity. This can result in malfunctions, short-circuits or damage to the batteries and components.
• Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or types or with different capacities. Remove batteries from the device if it is not to be used for a longer period of time!

NOTICE
Risk of voltage damage!
The manufacturer is not liable for damage related to improperly installed batteries!

Parts overview and scope of delivery

Illustration 1: Parts overview for base station (top) and remote sensor (bottom)

15 Battery compartment

Scope of delivery
Base unit (A), wireless sensor (B)
Also required (not included in delivery):
4x AAA/LR03 batteries (2 pieces each for station and sensor)

Screen display

Illustration 2: Display of the base station

saving time (DST)
7 Indoor temperature value (base station)| 14 Battery level indicator (remote sensor)
15 Battery level indicator (base station)

Before commissioning

NOTICE
Avoid connection faults!
In order to avoid connection problems between the devices, the following points must be observed during commissioning.

1. Place the base unit (receiver) and sensor (transmitter) as close together as possible.
2. Connect the power supply to the base unit and wait until the indoor temperature is displayed.
3. Establish power supply for the sensor.
4. Set up/operate the base unit and sensor within the effective transmission range.
5. Make sure that the base unit and the radio sensor are set to the same channel.

When changing the batteries, always remove the batteries from both the base unit and the sensor and reinsert them in  the correct order so that the radio link can be re-established. If one of the two devices is operated via amains power connection, the power connection must also be briefly disconnected for this device when the batteries are  changed. If, for example, only the batteries in the sensor are replaced, the signal may subsequently not be received at all or not be received correctly.
Note that the actual range depends on the respective construction materials used for the buildings as well as the respective position of the base unit and the outdoor sensor.
External influences (various radio transmitters and other sources of interference) can greatly reduce the possible range. In such cases, we recommend finding other locations for both the base unit and the outdoor sensor. Sometimes moving the sensor by just a few centimeters is enough!

Setting up power supply

Base station

1. Remove the battery compartment cover.

2. Insert the batteries into the battery compartment. Ensure that the battery polarity (+/-) is correct.

3. Replace the battery compartment cover.
   Remote sensor

4. Remove the battery compartment cover.

5. Insert the batteries into the battery compartment. Ensure that the battery polarity (+/-) is correct.

6. Replace the battery compartment cover.

Automatic time setting

After the power supply was established, the clock will automatically search for the radio signal. This will take approximately 3 to 8 minutes to finish this process.
If the radio signal is received correctly, the date and time will be set automatically and the radio control signal icon turns on.
If the clock fails to receive the time signal, go ahead with the following steps:

1. Press and hold the UP button for 2 seconds to re-initial- ize RC signal receiving.
2. Is the device still not receiving the signal, the time must be set manually.

Manual time setting

1. Press the SET button for approx. 3 seconds to enter the time setting mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press the SET button to confirm and switch to the next setting.
5. Order of settings: Time zone (-12 to +12 hours) > Year > Month > Day > Month (M) and Day (D)/Day (D) and Month (M) > 12/24 hour mode > Hours > Minutes
6. Finally, press the SET button to save the settings and exit setting mode.

Time zone setting

The time zone is set as part of the manual time setting. Further information can also be found in the chapter “Manual Time Adjustment”.

1. Press the SET button for approx. 3 seconds to enter the time setting mode.
2. Possibly press the SET button several times until the display shows the setting for the time zone (the factory setting is ’00’).
3. Press UP or DOWN button to select the desired time deviation in hours (-12 to +12 hours).
4. Finally, press SET button for approx. 3 seconds to confirm the set time deviation.

Receiving measurements automatically

As soon as the batteries have been inserted, the base station starts showing the measurement values for indoor use.
The first measurement values received by the outdoor sensor are displayed within approximately 3 minutes after commissioning.

1. In normal mode, press the SYNC button to select the channel.
2. Display order: channel 1, channel 2, channel 3, automatic channel flow If no signal is received, proceed as follows:
3. Press the SYNC button on the base unit for approx. 2 seconds to restart reception.

Weather trend

The weather station will calculate a weather trend for the next 12-24 hours on basis of the measured values:

Trend arrow indicators

1. Rising
2. Steady
3. Falling

The temperature trend indicator shows the trends of changes in the forthcoming few minutes. Arrows indicate a rising, steady or falling trend.

Disposal

Dispose of the packaging materials according to its type. Information on proper disposal can be obtained from the municipal waste disposal service provider or environmental agency.
Do not dispose of electronic devices in the household garbage!
According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its transposition into national law, used electrical equipment must be collected separately and recycled in an environmentally sound manner.
Batteries and rechargeable batteries must not be disposed of with household waste. You are legally obliged to return used batteries and accumulators and can return them after use either at our sales outlet or in the immediate vicinity (e.g. in the trade or in municipal collection points) free of charge.
Batteries and accumulators are marked with a crossed-out dustbin and the chemical symbol of the pollutant, “Cd” stands for cadmium, “Hg” stands for mercury and “Pb” stands for lead.

Technical data

Base station

-20°C ~ 0°C: ± 2°C
0°C ~ +50°C: ±1°C
Time display| HH:MM
Time format| 12 or 24 hours
Calendar display| DD / MM or MM / DD
Dimensions| 96 x 146.7 x 20 mm (W x H x D)
Weight| 146 g (without batteries)

Wireless sensor

Warranty

The regular warranty period is 2 years and starts on the day of purchase. To benefit from an extended voluntary warranty period as indicated on the gift box, registration on our website is required.
You can consult the full guarantee terms as well as information on extending the guarantee period and details of our services at www.bresser.de/warranty_terms.

EC declaration of conformity

Bresser GmbH hereby declares that the radio equipment type with item number 7004210 is in compliance with Directive 2014/53/EU. The full text of the EC Declaration of Conformity is available at the following web address:
www.bresser.de/download/7004210/CE/7004210_CE.pdf

UKCA declaration of conformity

A “Declaration of Conformity” in accordance with the applicable directives and relevant standards has been issued by Bresser GmbH The full text of the UKCA Declaration of Conformity is available at the following web address:
www.bresser.de/download/7004210/UKCA/7004210_UKCA.pdf
Bresser UK Ltd. • Suite 3G, Eden House, Enterprise Way, Edenbridge, Kent TN8 6HF, Great Britain
Please contact the service centre first for any questions regarding the product or claims, preferably by e-mail.
E-Mail: [email protected]
Telephone: +44 1342 837 098
BRESSER UK Ltd.
Suite 3G, Eden House
Enterprise Way
Edenbridge, Kent TN8 6HF
Great Britain
Number charged at local rates in the UK (the amount you will be charged per phone call will depend on the tariff of your phone  provider); calls from abroad will involve higher costs.

Bresser GmbH
Gutenbergstraße 2
46414 Rhede · Germany
www.bresser.de
@BresserEurope

References

• konsoleH :: Login
• IBERIA.COM en United States - the best prices for Iberia flights - Iberia USA
• Bresser | Startseite | Expand Your Horizon mit BRESSER
• bresser.de/garantiebedingungen
• bresser.de/warranty_terms

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>