UMIDIGI A13 Pro MP05 Smartphone User Manual
- June 5, 2024
- Umidigi
Table of Contents
UMIDIGI A13 Pro MP05 Smartphone
Building a great phone is hard enough, so building a great phone on a budget
should be infinitely more difficult. Big thanks to all who made this
superphone super awesome by contributing valuable time and developing
hardware, software & other developments. Thanks for choosing UMIDIGI products,
thanks to your support our value can be realized and we can constantly move
forward to create smart devices with better user experience.
www.umidigi.com
Scan the following QR-codes to follow us and enter the giveaway to win a
UMIDIGI smart device for free! 
VK: vk.com/umidigi
You Tube: youtube.com/umidigi
Facebook: facebook.com/Umidigi
Twitter: twitter.com/umidigi
lnstagram: instagram.com/umidigi
UMIDIGI is registered trademark by Shenzhen Youmi Intelligent Technology Co.,
Ltd. All other trademarks are the property of their respective owner.
Visit www.umidigi.com for more information
PRODUCT HEX-VISION IMAGE
POWER BUTTON: Long press to turn on the device; When the device is on, short press Power Button to shutdown or turn on the Screen.
PRODUCT HEX-VISION IMAGE
VOLUME BUTTON: Short press to adjust the volume or to mute incoming calls
CARD INSERT MANUAL
Insert Nano-SIM Card
Please face the chip side of the Nano-SIM card adown when inserting into the
slot. Be aware of the direction of the cut edge when placing the Nano-SIM card
into the slot.
Reminder:
Please use standard Nano-SIM card. Please don’t use a nonstandard card that
is hand-cut, in order to prevent the SIM slot and card tray from being damaged
and card-rejection situation that may cause damage to the phone.
TF Card Installation
Please place the metal contact of the TF card adown, be aware of the direction
of the cut edge. Place the card onto the tray and insert into the device.
Reminder:
Please turn off the phone before changing or replacing the TF card.TF card
does not come with the phone, please purchase separately.
Please do not plug in and out of the SIM card tray when the phone is on. Be
careful when using the slot thimble from scratching the phone.
DUAL-SIM MANAGEMENT
Please choose which SIM card slot to be the main one to be for4G network via
Setting> SIM Card. Choose your preferred network types of 4G/3G/2G via
Setling>Network&lnlemel>Mobile network>Preferred network type
FINGERPRINT IDENTIFICATION
You can unlock the screen with the fingerprint ID function.
Click Setting> Security&Location>Fingerprint, fingerprint information by
following the instructions on the please enter your SCreen.
Reminder:
Please ensure your finger is clean and dry when giving your fingerprint
information to the phone.
Please enter the information of your finger pulp for fingerprint information.
When unlocking the phone by fingerprint, please place your finger pulp on the
Touch ID sensor for about a second.
NETWORK CONNECTION
Connecting WLAN
Into the setting of WLAN via Settings>Network&tInternet>Wi-Fi
When WLAN is on, a list available WiFi connection will appear.
Click on the one you want to connect to, enter the password if the network
isencrypted, then click Connect. When it’s a public network, just click
Connect When the network shows “connected”, it is available to use
Bluetooth Function
Into the setting of Bluetooth function via Settings> Connected devices>
Bluetooth Enable the Bluetooth function by clicking the Menu Button then
select “Refresh”, then the phone will search for available Bluetooth devices
for pairing and list on the screen. Click on the one you want to pair with,
then click “Pair on the dialog pop-up.Documents are available for transmission
after Bluetooth pairing.
Reminder:
Slide down the status bar twice to open the shortcut switches for Bluetooth
and other functions.
WLAN Hot-spot Setting
Click on via Settings>Network&Internet>Hotspot&tethering>Wi-Fi hotspot to turn
on the Portable WLAN Hot-spot function.
When setting up WLAN hot-spot, enter your user name in “Network Name” and
password, then click Save. Another device can use the WLAN hot-spot by
searching and entering the password of the password.
Reminder:
Please enable the Data Connection before enabling the network sharing
function. Your mobile traffic will be shared by other devices, so please use
it carefully. The signal of the WLAN hot-spot depends on the signal strength
and devices
CAMERA
Aim the camera at the shooting object, and the phone will start focusing
automatically; or you can click on the screen to choose the object you want to
focus on, then click the “Capture” icon to take photos.
You can also choose other modes such as video recording, beautifying, and
panorama to take photos/videos.
INSTRUCTIONS FOR DUAL-CARD STANDBY
“Dual card, dual standby, single-pass” means you can insert two SIM cards and
have them both “standby”, but cannot make phone calls at the same time. During
the standby mode, both cards are available for receiving phone calls, but once
one of the cards is activated, the other one cannot receive phone calls nor
make phone calls.
SECURITY INFORMATION
Security information (including BS, ES, and battery security information) of
third-party software installation and function may vary in different regions
or by different hardware specifications.
UMIDIGI holds a disclaimer for the performance problem or incompatibility
caused by third-party applications, registry editing, and OS software
modification. Customizing the OS may cause the device or some applications
fail to work properly.
Please prevent the device or the battery in extreme cold/hot conditions. The
extreme temperature will lead to deformation of the phone and reduce the
charging capacity and battery life Please only use the custom-designed and
approved battery and recharger by UMIDIGI. An incompatible battery and
recharger may cause damage to the phone. Please abide by local regulations
when disposing of the used batteries and phones.
Please do not place the battery or the phone onto or inside heating devices
such as microwaves, ovens or radiators. The battery may explode if it gets too
hot.
Please do not crush or pierce the battery. Prevent the battery from getting
high pressure from outside, it may cause internal short and overheat
SPECIFICATIONS
BASIC INFORMATION
MP05
- Operating systen
- AndroidTM 11
- CPU
- T610, 2xA75 1.8GHz+6xA55 1.8GHz
- GPU
- ARM Mali G52 3EE 2-Core, 614.4MHz
- RAM
- 4GB/6GB
- ROM
- 128GB
- Battery
- 5150mAh
- Touch ID
- Side-mounted Fingerprint sensor
- Display
- Screen Size
- 6.7 inch
- Resolution
- 720 1650 pixels
- Touch
- Capacitive multi-touch
Cameras
- Rear Camera
- 48MP+8MP+5MP Camera
- Front Camera
- 16MP Camera
Connection(1/O)
- Band
- LTE FDD:B2/5/12/13
- LTE TDD: B41
- WCDMA:B2/5
- GSM:B2/5
- NFC
- Yes
- SIM/TF card
- 2 Nano SIM Card Or
- 1 Nano SIM Card and 1 TF Card
- WIFI
- EEE802.11 ac/a/b/g/n
- Bluetooth
- Bluetooth 5.0
- GPS
- Build in GPS/Glonass/Beidou
- FM
- Yes
- Earphone Port
- 3.5mm
- USB Port
- Type-C USB
Other Features
-
Video File Format
- 3GP/MPEG4,etc
-
Audio File Format
- WAV/MP3/AACIAMR/MIDI/APE/WMA, etc.Support TF card up to 256GB
-
Language
- Support Multi-language
-
Sensor
- G-Sensor, P-Sensor, L-Sensor, Accelerometer,
Compass, Gyroscope
- G-Sensor, P-Sensor, L-Sensor, Accelerometer,
-
Card Extend
- Support TF card up to 256GB
In the box
- Phone x1
- Type-C cable x1
- Power Adapter x1
- User Menu x1
- phone case x1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>