CHAMPION POWER LFP12.8-200 LiFePO4 Battery User Manual

CHAMPION POWER LFP12.8-200 LiFePO4 Battery User Manual

In order to use this product correctly, please read this instruction carefully and be familiar with the operation steps. Please keep this manual for your reference.

1. Product brief introduction

This product is a fully functional lithium iron phosphate battery pack management system, with single overvoltage/undervoltage, total undervoltage/overvoltage, charge/discharge overcurrent, high temperature, low temperature and short circuit protection and recovery functions. Accurate measurement of SOC and SOH health status statistics are realized in the charging and discharging process. Realize voltage balance during charging process. Real-time data communication and monitoring with APP through Bluetooth communication.

It can be applied to photovoltaic system, wind energy system, RV energy storage, electric ship, backup emergency energy storage system and other fields. It has the advantages of light weight, easy installation, long life and so on.

2. Technical specification

3. Product standard

4. Installation instructions

4.1 Preparations
4.1.1 Appearance: Check whether the packing case and battery are in good appearance and do not crack, distort, stain, or leak electrolyte

4.1.2 Inspection: Check whether the battery model and accessories are complete
4.1.3 Protection: Wear protective equipment such as gloves and goggles

4.2.2 Using in Series or Parallel (A maximum of 16 batteries can be connected in parallel and 4 batteries can be connected in series. Note: It is forbidden to use series and parallel simultaneously)

• Series and parallel modules must be of one voltage, one capacity, and one batch
• After series and parallel connection, only the voltage and capacity expansion are allowed, and the charge and discharge current is not increased
• The battery serial-parallel pressure difference is ≤100mV

5. LCD Instruction

Use the function key to switch to the voltage mode and power mode one by one.

Refer to the below:

6. Communication Instructions

It is mainly used to read the battery voltage, charge and discharge current, protection status of each string of lithium batteries, and the parameter setting function of the lithium battery protection board, so that users can clearly understand the health status of lithium batteries and ensure the safety of lithium batteries.

6.1 Use of APP
The APP can be installed on Android 4.3 and above, and used on devices that support Bluetooth 4.0, and can only run after obtaining the permission to use Bluetooth.

6.2 APP download
Please open your mobile browser and scan the QR code below to download and install:

6.3 Bluetooth connection
In the connection interface, scan the surrounding Bluetooth 4.0 devices, click the connection device. The APP automatically recognizes whether the device is supported, and if it is supported, it will enter the dashboard interface. If it is not supported, it will prompt the user that the device is not supported and disconnect.

6.4 Battery status dashboard

• Display the battery power percentage to allow users to better know the battery status
• Display the current during charging and discharging
• Displays total battery voltage
• Display the voltage range of each cell
• Displays the current battery temperature

6.5 Basic battery information reading

• Read the basic information of the battery, display the current battery temperature, and the number of battery cycles.
• Read single cell voltage and charge and discharge curves
• Read the battery protection information, so that the user can better understand the cause of the current power outage, so as to take timely countermeasures

6.6 Lithium battery protection parameter view
Users can view all parameters on the protection board, so as to clearly understand the protection action of the battery and the conditions under which the release action is turned on

6.7 Lithium battery protection parameter settings
The user adjusts the parameters according to the state of the battery cells and the characteristics of the electric equipment, so that the protection board, the battery, and the electric equipment can work more harmoniously and achieve the optimal working state.

6.8 Function settings
Users can set their own functions such as charge and discharge, load detection, balance function, temperature detection, etc.

6.9 APP settings
Users can set the bluetooth name of the battery by themselves on this page

7. Precautions

To prevent possible battery leakage, heat generation, and fire, please observe the following precautions:

• Please use a special charger for lithium iron phosphate battery when charging.
• It is strictly forbidden to immerse the battery in seawater or water.
• It is forbidden to use the battery near the hot high temperature source, such as fire, heater, etc.
• It is forbidden to use the battery by reversing the positive and negative poles.
• It is forbidden to connect the battery directly to the power outlet
• It is forbidden to throw the battery into a fire or heater
• It is forbidden to use metal directly to short-circuit the positive and negative electrodes of the battery
• It is forbidden to transport or store batteries together with metals, such as hairpins, necklaces, etc.
• It is forbidden to knock or throw, trample on the battery , etc.
• It is forbidden to weld the battery directly and pierce the battery with nails or other sharp objects.

8. Packing List

9. Others

• If the customer needs to use the battery for equipment beyond the specification in the document, or use the battery under the usage conditions beyond the specification in the document, please contact with supplier in advance. It is necessary to carry out specific experimental tests to verify the performance and safety of the battery under the use conditions.
• Our company is not responsible for any accident caused by using the battery under conditions other than those specified in the document.
• If necessary, the company will inform the customer in writing about the improvement measures for the correct operation and use of the battery.
• Any matters not mentioned in this manual must be determined through negotiation between the two parties

FCC warning：

1. This device should be installed and operated with minimum distance 20cm between the radiator&your body.

2. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
   (1) This device may not cause harmful interference, and
   (2) This device must accept any interference received, including interference that may cause undesired operation.

3. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read More About This Manual & Download PDF:

References

• Industrial Vrla Battery,LifePo4 Lithium Battery-Champion Power

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>