ROOMBANKER RBSS-TH1915 Temperature Humidity Monitor Instruction Manual
- June 16, 2024
- Roombanker
Table of Contents
Environmental Monitoring Sensor
Temperature Humidity Monitor
Temperature & Humidity
Monitor
RBSS-TH1915 Temperature Humidity Monitor
Download Spec
Last update: January 12th, 2024.
A compact and exquisite temperature and humidity monitor to accurately track
your indoor temperature and humidity changes. It supports both Fahrenheit and
Celsius versions.
Detection Performance
Temperature Range and Accuracy
- From -10 ℃ to +55 ℃
- Accuracy at 0.5 ℃
Humidity Range and Accuracy
- From 0 to 99%RH
- Accuracy at 5%
Features
Centigrade and Fahrenheit
- Support unit switching between Centigrade and Fahrenheit
Depends on sales region.
Remote setting and testing
- Setting and testing from RB Link App
Advanced features
-
Power up enrolling
When T&H monitor is powered up, it will automatically start paring to the hub nearby -
Find me
When enabled, the T&H monitor starts flashing green, which can help identify the monitor from numerous devices. -
Signal strength detection
When enabled, T&H monitor starts flashing green/orange/red showing the wireless signal strength between the hub at current installation site. -
Low battery notification
RBF wireless technology
Wireless signal range
- Up to 1,900 m in an open space with hub
- Two-way communication with hub
Frequency bands
- 868 MHz Monitor: 863 ~ 870 MHz
- 915 MHz Monitor: 902 ~ 928 MHz
- Depends on sales region.
Wireless signal modulation
- FSK/DSSS
Encrypted communication
- All the data transmitted are protected by AES-CCM encryption with a random key.
Frequency hopping (FHSS)
- To prevent radio interference and radio signal interception.
Time division multiple access (TDMA)
- With the help of clock synchronization technology, hub will slice time into different division for different RBF wireless devices. In this way, all devices will communicate with hub in a sequence.
Electrical Characteristics
Power Supply
- AA Battery× 3
- Up to 5 years (standby mode)
General
Operation Temperature
From -10°С to +55°С (14°F to 131°F)
Operation Humidity
From 0% to 99%
Storage Temperature
From -20°C to 60°C (-4°F to 140°F)
Dimension(WxHxD)
64mm × 64mm × 28mm
Weight
68.5 g
Compatibility
- Operates with all Roombanker Home Security Hubs, RBF repeaters.
Complete set
Product | Quantity |
---|---|
Temperature Humidity Monitor | × 1 |
AA Battery | × 3 |
Quick Start Guide | × 1 |
Additional information
Available models
- RBSS-TH1-868
- RBSS-TH1-915
Certifications
- CE, CB
- FCC
- ICASA
- RCM
- NOM
- Anatel
Warranty
Replacement and repair within 24 months of the date of sale. Batteries are not
covered under warranty.
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, Pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.