JBC SB03CC Syringe Barrel Instruction Manual
- June 13, 2024
- JBC
Table of Contents
JBC SB03CC Syringe Barrel
Product Information
- Product Name: SB03CC 3cc Syringe Barrel
- Reference: SB03CC
Packing List
- Syringe Barrel Cap
- Seal
- 3cc Syringe Barrel – 5 units
- Syringe Adapter – 1 unit
- Manual – 1 unit
Specifications
- Volume Capacity : 3 cc / 0.1 fl OZ
- Weight: 0.02 kg / 0.04 lb
- Total Package Dimensions / Weig ht: 90 x 55 x 40 mm / 0.03 kg (L x W x H)
- Complies with CE standards
- ESD Safe
Warranty: JBC’s 2-year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labor. Warranty does not cover product wear or misuse.
Disposal: This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.
Product Usage Instructions
Barrel Filling
- Seal Placement
Fill the syringe barrel with solder paste.
- Plunger Placement Seal
Take the barrel filled with solder paste and place the seal into the barrel.
- Tip Placement Plunger Insert the plunger into the seal and press the seal against the
solder paste to eliminate the air inside the barrel.
- Adapter Use (for 3cc syringe only) Barrel
Thread the tip onto the syringe barrel. For 3cc syringes in use with DPM, the enclosed adapter is needed. Assemble the adapter by clipping it onto the barrel.
Note: Please refer to the manual for detailed instructions and safety precautions.
This manual corresponds to the following reference: SB03CC
Packing List
The following items are included
- 3cc Syringe Barrel ………………………… 5 units
- includes (5 units each)
- Syringe Barrel Ref. 0029412
- Seal Ref. 0029416
- Cap Ref. 0029407
- Syringe Adapter …………………………….. 1 unit
- Manual …………………………………………………………………………………………………………………………………. 1 unit
- Ref. 0027449
Operation
SB03CC is designed to be used with JBC´s Manual Solder Paste Dispenser DPM, with JBC’s Needles ND-KS and Tappered Tips ND-KP*
- Barrel Filling
- Fill in the syringe barrel with solder paste
- Seal Placement
- Take the barrel filled with solder paste and place the seal into the barrel.
- Plunger Placement
- Insert the plunger into te seal and press the seal against the solder paste to eliminate the air inside the barrel.
- Tip Placement
- Thread the tip onto the syringe barrel.
- Adapter Use (for 3cc syringe only)
For 3cc syringes in use with DPM the enclosed adapter is needed. Assemble the adapter by clipping it onto the barrel
Specifications
- SB03CC
- 3cc Syringe Barrel
- Ref.: SB03CC
- Volume Capacity : 3 cc / 0.1 fl OZ
- Weight: 0.02 kg / 0.04 lb
- Total Package Dimensions / Weight: 90 x 55 x 40 mm / 0.03 kg
- (L x W x H) 3.54 x 2.17 x1 .57 in / 0.07 lb
- Complies with CE standards
- ESD Safe
Warranty
- JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour.
- Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
- This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>