CHAMPION POWER EQUIPMENT 201074 8000W Electric Start Generator User Guide

May 15, 2024
CHAMPION POWER EQUIPMENT

CHAMPION-POWER-EQUIPMENT-logo

CHAMPION POWER EQUIPMENT 201074 8000W Electric Start Generator

CHAMPION-POWER-EQUIPMENT-201074-8000W-Electric-Start-Generator-
fig-1

Specifications

  • Model: 201074
  • Recommended Engine Oil: 5W-30
  • Oil Capacity: Up to 37.2 fl. oz. (1100 ml)
  • Fuel Type: Regular unleaded gasoline (DO NOT use E15 or E85)
  • Starting Method: Electric Start or Manual Start

Product Usage Instructions

Set Up
Follow the steps below to set up the product:

  1. Attach the wheel kit as per the instructions provided in the manual.
  2. Connect the battery by cutting the cable tie on each side of the battery connector and pushing the two halves together tightly.
  3. Add engine oil following the recommended specifications. Do not overfill.
  4. Move the generator to an open, outdoor area with the exhaust pointing away from any enclosed spaces. Keep all objects at least 5 feet away from the generator.
  5. Add fuel, ensuring you do not use E15 or E85 gasoline.

Starting the Generator
You can start the generator using either Electric Start or Manual Start:

  • Electric Start:
1. Move the choke lever to the CHOKE position.
2. Press and hold the ignition switch to the START position.
3. Move the choke lever to the RUN position once started.
  • Manual Start:
1. Move the choke lever to the CHOKE position.
2. Pull the starter cord to start the generator.
3. Move the choke lever to the RUN position after starting.  

Remember to never start or stop the generator with electrical devices connected or turned on.

FAQ

  • Can I use E15 or E85 gasoline in this generator?
    No, it is recommended not to use E15 or E85 gasoline in this generator to avoid damage.

  • How much engine oil should I add?
    The recommended engine oil is 5W-30, and you can add up to 37.2 fl. oz. (1100 ml) without overfilling.

Set Up

  1. Open shipping carton. Assembly > Unpacking
  2. Attach wheel kit. Assembly > Install the Wheel Kit

CHAMPION-POWER-EQUIPMENT-201074-8000W-Electric-Start-Generator-
fig-2

  1. Connect the battery. Assembly > Connect the Battery.
    Cut cable tie on each side of battery connector.
    Push two halves of battery connector together tightly.

  2. Add oil. Assembly > Add Engine Oil.
    Recommended: 5W-30, up to 37.2 fl. oz. (1100 ml) DO NOT overfill.

  3. Move the generator outdoors.

    • Move generator to an open, outdoor area.
    • Point exhaust away. Never run generator in enclosed areas (e.g., not in house or garage).

CHAMPION-POWER-EQUIPMENT-201074-8000W-Electric-Start-Generator-
fig-5

  * Keep all objects at least 5 feet (1.5 m) from generator.
  * Heat from the muffler and exhaust gas can ignite combustible materials.
  1. Add fuel. Assembly > Add Fuel
    DO NOT use E15 or E85.

CHAMPION-POWER-EQUIPMENT-201074-8000W-Electric-Start-Generator-
fig-7

  1. DO NOT plug in any electrical devices.
    NEVER START OR STOP THE GENERATOR WITH ELECTRICAL DEVICES CONNECTED OR TURNED ON!

  2. Turn the fuel dial to the “RUN” position.

CHAMPION-POWER-EQUIPMENT-201074-8000W-Electric-Start-Generator-
fig-9

  1. Electric Start
  2. Move the choke lever to the “CHOKE” position.
  3. Press and hold the ignition switch to the “START” position.
  4. Move the choke lever to the “RUN” position.

CHAMPION-POWER-EQUIPMENT-201074-8000W-Electric-Start-Generator-
fig-10
Manual Start

  1. Move the choke lever to the “CHOKE” position.
  2. Pull the starter cord.
  3. Move the choke lever to the “RUN” position.

CHAMPION-POWER-EQUIPMENT-201074-8000W-Electric-Start-Generator-
fig-11

  1. Plug in. ˛ Operation > Connecting Electrical Loads.

FOR MORE GUIDE
Visit our YouTube channel to watch our how-to videos and subscribe to view our latest videos on our Champion Power Equipment products!

NEED ASSISTANCE OR HAVE A QUESTION? GIVE US A CALL.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

CHAMPION POWER EQUIPMENT User Manuals

Related Manuals