Outdoor Waterproof Wireless Bluetooth Speaker – 6.5 Inch Pair 2-Way Weatherproof-Complete Features/User Guide

Outdoor Waterproof Wireless Bluetooth Speaker – 6.5 Inch Pair 2-Way

Weatherproof

Specifications

• Product Dimensions
  18 x 11.5 x 15.8 inches

• Item Weight
  16.6 pounds

• Speaker Type
  Outdoor

• Mounting Type
  Wall Mount

• Special Feature
  Speakers

• Brand
  Pyle

Introduction

The Pyle PDWR64 mountable speaker systems deliver high-powered wireless Bluetooth performance whether you’re inside or out! They are the ideal solution for adding full-range stereo sound to boats, decks, patios, and backyards, thanks to their tough marine-grade waterproof construction. The system features two active and passive speakers, as well as a built-in 2-channel digital amplifier. The polymer dome tweeters produce precise high- frequency sound, while the strengthened long-throw woofers produce powerful bass once connected. Built-in Bluetooth audio streaming allows you to quickly and conveniently connect and stream audio from all of your favorite devices (works with iPhones, Androids, Smartphones, Tablets, Laptops, Computers, etc.).

Thanks to the gold-plated connector on the back, you’ll be able to attach extra external devices to your speaker system. RCA audio jacks and speaker plug terminals The Pyle PDWR64 indoor/outdoor speaker systems combine quick wireless streaming with high-powered weatherproof music performance.

What’s In the Box?

• Loudspeakers
• Brackets
• Bracket Bolts
• Screws
• Connection Wire
• RCA Wire

MOUNTING THE BRACKET

1. Remove the bracket knobs and the bracket from the speaker

2. Hold the bracket up to the mounting surface. The speaker can be mounted either horizontally or vertically. Hold the bracket so that the speaker wire fits through the large, circular wire hole
   in the bracket. Align the bracket to be square with the surroundings (use a level for accuracy).

3. Mark the locations of the three shaped screw holes. Use all of the holes.

4. Drill pilot holes into the mounting surface.

5. Gently pull the speaker wire through the wire hole in the center of the mounting bracket. Align the bracket so that the holes all lineup.

6. Use your hardware to attach the bracket to the mounting surface.

FINAL ADJUSTMENTS

1. After checking that the speaker is in-phase and works correctly, angle the speaker for the best sound.
2. Hand tightens the bracket knobs only. Power tools may over-tighten the knob, and strip the threads of the insert.
3. Check that the entire installation is safe and secure.

Bluetooth connection

Please be sure the Bluetooth is turned on at your device. When the device is in Bluetooth range, it will connect Bluetooth automatically and will be disconnected automatically when it is out of Bluetooth range.

Features

• Built-in 2 Channel Amplifier
• Bluetooth Wireless Music Streaming
• Marine Grade Waterproof Construction
• Gold Plated Speaker Plug Terminals
• RCA (L/R) Audio Input Connector Jacks
• Single RCA Speaker Output Connector Jack 

Frequently Asked Questions

• What’s the Bluetooth version?
  I’m fairly certain these other two people didn’t understand the question. It’s the same one I have, I believe you want to know if these support Class I Bluetooth using a TX or RX signal, is that right? If so, I don’t see it listed, therefore (I’m guessing here) I don’t think they do. The $111.00 ones from Sound Appeal do. I didn’t really like the rating variance on those though, and only 53% 5 stars? I’m looking for better ones with Class I/ RX-TX.

• Does anyone know how to disable the Bluetooth connection notification? It’s really loud!
  Yes, it’s really annoying and loud. I get the notification sometimes in the middle of the night when I leave my nest mini connected to Pyle via BlueTooth.

• How are they powered?
  One of them has a built-in 6-foot power cord for 120 volts the other connects to it with a Speaker wire as a slave.

• If I mount these up high do I need to turn them off each night? Do they have a standby mode and wake upon pairing?
  They do have a stand-by mode (amber light instead of blue) after a certain period of inactivity. However, mine is connected to a power strip that I turn off after use so I really can’t answer whether they will re-connect automatically via Bluetooth after being in standby mode. I suspect they will.

• Can u connect anything to it to play things directly or does it only use Bluetooth connectivity? can a tv be to it?
  you can hook up other sources to this unit, just have to designate which device you are going to use if both play it will sound like crap so if you hook up a tv make sure your Bluetooth is off.

• Am I correct that you can also wire these speakers to a receiver?
  Yes you can.

• Can you hook a BT mic to these?
  You cannot.

• Do they work with Alexa?
  These are Bluetooth receivers, not transmitters, so your Alexa device would have to have Bluetooth transmit mode.

• Can the firmware on these speakers be updated to work with Bluetooth 5.0?
  Yes, I only use Bluetooth, it’s the reason for my purchase. Just turn on speakers and search on your device for “Pyle” and pair, you’ll be set.

• Does the unit seem to stay powered on even if it not playing something or does the unit sleep?
  Yes. The unit remains powered. To discontinue streaming to the speakers, I click off the speakers on the Bluetooth device via the device’s Bluetooth settings. The blue light then changes to red, and the sound stops streaming.

• There has to be a way to use a replacement wire for the second speaker, right? Has anyone done that successfully?
  Yes, you can extend the second speaker by using the same gauge wires.

• Do you offer just the mounting brackets and wiring?
  yes, I brought these speakers, but they are not waterproof.

https://m.media-amazon.com/images/I/A16Ub5KrEqL.pdf 

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>