Pyle PDWM8250 Professional 8-Channel UHF Wireless Microphone System USER GUIDE
- October 27, 2023
- Pyle
Table of Contents
Pyle PDWM8250 Professional 8-Channel UHF Wireless Microphone System
SPECIFICATION
- RECOMMENDED USES FOR PRODUCT: Singing
- BRAND: Pyle
- CONNECTIVITY TECHNOLOGY: XLR
- CONNECTOR TYPE: XLR Connector
- SPECIAL FEATURE: Volume Control
- COMPATIBLE DEVICES: Radio
- COLOR: Black
- INCLUDED COMPONENTS: 8-Ch. Wireless Microphone System
- POLAR PATTERN: Omnidirectional
- ITEM WEIGHT: 4 Pounds
- IMAGE & SPURIOUS REJECTION: >70 dB
- RECEIVING SENSITIVITY: -105 dB
- SIGNAL / NOISE RATIO: -105dB
- BORDER UPON CHANNEL REJECTION: > 70 dB
- AUDIO OUTPUT LEVEL: 0-300 mV
- POWER REQUIREMENTS: 13-15V DC nominal 1500 mA
- H.D.: < 1%
- POWER SUPPLY: 110/220V (13-15V Power Adapter)
- RECEIVER DIMENSIONS (L X W X H): 9” x 7.8” x 3.9”
INTRODUCTION
Wide coverage areas are offered by the Pyle 8-Channel Wireless Microphone Systems, which also have easy to use settings. For all of your microphone demands, wireless UHF signal audio transmission enables distortion-free and clear vocal audio delivery. Independently adjustable channel volume controls, digital LCD displays with frequency readouts, and LED audio signal indications are all characteristics of the system base receiver. Eight XLR balanced output jacks, two 1/4″ mixed output connectors, and integrated mounting brackets for rack mount compatibility round out the system’s capabilities. The Pyle 8-Channel Wireless Microphone Systems provide simple operation and clear audio performance.
HOW UHF MICROPHONE WORKS
The linked transmitter receives an audio signal from the wireless microphone. This audio signal is wirelessly sent by the transmitter using radio waves. These audio signals and radio waves are tuned to the receiver. An XLR cable is used by the receiver to output the balanced audio stream.
HOW TO CONNECT TO TV
- Connect an optical cable to the TV’s “optical output” and the microphone’s “INPUT,” respectively.
- The other end of the 6.35mm/3.5mm cable should be connected to the microphone’s “OUTPUT,” and the other end should be connected to the speaker’s MIC/AUX.
HOW TO KNOW IF MIC IS BLOWN
A faulty microphone will sound dull, have poor frequency pick-up, and exhibit strange echo or distortion.
HOW TO CONNECT TO PHONE
You can attach a microphone with a 3.5mm TRRS connection jack, such this one, if your Android device has a headphone jack and does not require an adaptor. Make sure you give an app permission to access external devices if you’re using one that asks for it.
FAQs
Are the microphones metal or plastic body?
They are plastic.
Bought the system, but 4 mics are bad, what do I type into the search box to get new ones to work with the same system?
our sincere apologies for the inconvenience. Please try to adjust the frequency number for each channel. If the troubleshooting didn’t work kindly call our Technical Support Department at 718 535 1800 Press 2 then 1 from Monday to Friday 9 AM to 5 PM EST.
Are these microphones omni directional or do you have to speak into it a certain way to be heard correctly?
The mics are unidirectional and, while I have only tested them a few times, they seem to be pretty particular about where they pick up. If you speak off to the side or facing away, the mic will not pick it up. They are great for individual vocals.
do mics have gain control or just on mixer?
Gain control is on the receiver per each channel (gain) also controlled at the mixer like a traditional mic. There is an on/off switch on each mic. Note I have experienced a problem with the singers accidentally hitting this switch on the mics, shutting off the mics while singing. Once the switch is flipped back to the on position it takes up to 10 seconds to re-acquire the wireless frequency between mic and wireless receiver. Over all I’m happy with this system. The mics are sensitive as reproduce sound very accurately. I would recommend this product.
Can you use two of these systems together without interference?
Yes you can.
Is it possible to get this system with 6 handheld mics and 2 belt clip lavalier mics?
Extra-large.
Does each mic have their own individual channel?
Yes they do.
What speaker do I need to buy with these microphones?
you have to connect the microphone system to your receiver. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PDWM8250 for more details.
Can I use these type of mic in a boardroom? We have 6 members sit next to each other at boardroom meetings. Will it cause interference?
Yes, we are using them for board meetings.. attaching into 6 ceiling speakers with no issues. We have 10 in attendance & using 7 mics on stands placed on the tables.
Are there any reviews of it?.. or just a product video or something?. Just to be sure is it 110-220v? saw it on pyple’s website.
They are 110 volt.
Can you by extra mikes for this system?
To my knowledge I would say NO. Besides, if you could, they would have to share channels with the other mics and I’ve seen that to cause issues.
if a module or microphone fails, can I purchase a replacement like VocoPro does?
Two mics didn’t work and I was told to send them in.
What is the range of these mics?
I use them in an amphitheater. The range is 200 yds. Works great.
Can you set up different mics with the system? like other brand mics?
No you cannot set up other brands of mics with this system.