Pyle PDMICKT34 3-Piece Professional Dynamic Microphone USER MANUAL
- October 27, 2023
- Pyle
Table of Contents
Pyle PDMICKT34 3-Piece Professional Dynamic Microphone
SPECIFICATION
- RECOMMENDED USES FOR PRODUCT: Singing
- BRAND: Pyle
- CONNECTIVITY TECHNOLOGY: Wired, Wireless
- CONNECTOR TYPE: XLR Connector
- SPECIAL FEATURE: Clip
- COMPATIBLE DEVICES: Amplifier, Speaker
- COLOR: Black
- INCLUDED COMPONENTS: carry case, amplifier
- POLAR PATTERN: Unidirectional
- ITEM WEIGHT: 61 Pounds
- MIC ELEMENT: Hyper-Cardioid
- PICKUP PATTERN: Unidirectional Moving Coil
- MIC CONSTRUCTION MATERIAL: Zinc Alloy
- AUDIO CABLE CONNECTORS: XLR to 1/4’’
- XLR CABLE LENGTH: 26’+ Ft.
- OPEN CIRCUIT SENSITIVITY: -54 dB
- FREQUENCY RESPONSE: 60Hz-15kHz
- OUTPUT IMPEDANCE: 600 Ohm, +/-3dB (0dB=1V/Pa @ 1kHz)
- MIC DIMENSIONS (L X W): 7’’ x 1.8’’ (-Each)
- MIC WEIGHT: 61 lbs. (-Each)
- SOLD AS: Kit
- WEIGHT: 23 lbs.
- PRODUCT DIMENSIONS: 75 x 5 x 12.25 inches
INTRODUCTION
Reliable studio and stage-tested performance is offered with the Pyle Professional Dynamic Microphone set. The unidirectional moving coil handheld mic is ideal for vocals since it has a very wide frequency response range. Whether performing live or recording in a studio, it provides superb sound pickup. A built-in acoustic pop-filter, high quality audio output, a sturdy design with a steel mesh grill, an ON/OFF switch for stage management, and an integrated XLR connection cable are further features. Utilize the Pyle PDMICKT34 Professional Dynamic Microphone to experience dependable sound quality.
HOW TO USE
An audio interface must be plugged into your computer before an XLR cable from your dynamic microphone can be used to link the two devices. Then, change the input to the audio interface in your computer’s settings.
HOW TO MAKE MIC SOUND BETTER
You won’t record as many popping or breathing sounds if you position your microphone slightly above or below your mouth or in another way that prevents you from singing directly into it. Pop filters are affordable and available online.
HOW TO ADJUST MIC SENSITIVITY
- Get Microphone Amplifier now.
- Grant permissions to Storage and Microphone by opening the microphone amplifier.
- Continue to the main screen after dismissing the Presets menu.
- Make the microphone more sensitive by moving the Audio Gain slider 2–10 points to the right.
HOW TO KNOW IF MIC IS SENSITIVE
The conventional method for determining microphone sensitivity uses a 1 kHz sine wave at 94 dB sound pressure level (SPL), or 1 pascal (Pa), of pressure. The microphone’s sensitivity is determined by the strength of the analogue or digital output signal it produces in response to that input stimulus.
FAQs
How long are the cables
The cables are each 25 ft. long and are a very nice quality. All three mics and three cables come in a hard case inside of a soft case with a shoulder strap. All the mics have on off switches and are also of good quality.
Do these mics require any power through the 1/4in male? Or can they be plugged into a mixer and amplifier to record?
yes it is a plug-and-play unit. For more info, kindly visit our website pyleaudio.com. Type the model number on the search box PDMICKT34.
Can I use a 3. 5mm Stereo Plug (male) to 6. 35mm (1/4 Inch) Stereo Jack (female) adapter. to connect to my machine ?
Yes.
Would this give decent sound to my vox in my metal band?
Off course, the sound quality you’ll get. It’s going to be impressive and professional!
Are both sides of the cable XLR or is it for to 1/4? I need XLR to XLR.
1 XLR the other ¼.
will these mikes work with XLR to XLR cables?
Yes.
Is this good for professional singers?
I would say these are good for professional singers. For the price, the quality is excellent and I have no complaints using them in my home “studio”.
is it water proof and is it battery operated
No, XLR to 1/4” jack.
What is your return policy if these are not compatible with our sound system?
You’ll have to ask the seller.
do you have to have the audio connection or can you go anywhere in the room without it being connected?
It’s not cordless , you need to be connected.
Can these microphone use for church
Depends on what other equipment you have. These microphones need to be hooked up to an amplifier by a cable which they come with.
can they be wireless and don’t have to have the cord
No, they cannot be wireless. They must be attached to the cord to operate. Just know that the cords that come with these microphone are slightly larger than the standard microphone jacks and will not fit into your amp head; therefore, you will need to buy an adapter as I had to do.
will this work with the Edison professional en-1600 ?
it will work to any type of amp with 1/4″ Mic port. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PDMICKT34 for more details.
What is recommended for connecting 4 of these microphones to a computer for podcast recording purposes?
you have to use a receiver with 1/4″ Mic port. Please check the video tutorial below. https://www.youtube.com/watch?v=-eGMehDpKJA.
Is this listing for all three microphones plus the accessories? Does “3 piece” refer to all three microphones or one microphone plus two accessories?
This is a case of three microphones with accessories cord bag is alright however hard case will not stay shut. This is a great buy for the money.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>