KLARSTEIN 10035824 Coolerush Air Cooler Instruction Manual

KLARSTEIN 10035824 Coolerush Air Cooler

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

TECHNICAL DATA

SAFETY INSTRUCTIONS

• Check the voltage on the rating plate before use. Only connect the appliance to sockets which correspond to the voltage of the appliance.

• Keep the appliance and cable away from sources of heat, sharp objects or anything that may cause damage.

• Do not place the cord under carpets. Do not cover the cord with small clothes, shirts or other similar elements. Place the cord away from traffic areas in order to avoid any risk of tripping over.

• Do not operate the appliance if the cable or plug is damaged.

• If the supply cord or plug is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• Indoor use only.

• Do not cover the machine during using.

• Place the appliance on a stable flat horizontal surface. Make sure the appliance is in an upright position during use.

• Ensure the appliance is switched OFF before connecting to the mains power supply.

• Always ensure that hands are dry before operating or adjusting any switch on the product or touching the plug and mains supply connections.

• Do not leave this appliance unattended when it’s in use. Turn off and disconnect the appliance when you leave the room for an extended period.

• Switch off the appliance and unplug from the mains socket when not in use, before filling, cleaning or other maintain.

• To disconnect the appliance, switch it “OFF”, and then remove the plug from outlet. Do not pull the cord to disconnect the plug.

• This device may be only used by children 8 years old or older and persons with limited physical, sensory and mental capabilities and /
  or lack of experience and knowledge, provided that they have been instructed in use of the device by a responsible person who understands the associated risks.

• Use the appliance only as described in this manual.

• Do not insert your fingers in the openings of the guard.

• Do not leave hair, tissue, tablecloths, clothes or curtains near all openings of the fan, they could be sucked into the fan and be taken within the internal moving parts that could cause injury or damage.

• Do not use the appliance in wet or damp locations such as bathrooms.

• Do not operate the appliance when it’s not mounted on its wheels or if it’s lying on the side.

• Make sure the cord is completely extended before use.

• When in operation, evaporative coolers moisturize the ambient air. Over-humidifi cation of residential rooms should be avoided. Recommendation:
  40- 50 % relative humidity. Excessive humidity of the air can damage the home and cause health problems.

• The appliance may only be set up on water- and moisture-proof fl ooring materials (spilling some drops of water is unavoidable when the content of the tank is changed).

• With each and every change of tank content, completely remove residual water from the equipment. To prevent nucleation, remove residual water from the equipment and water tank every time after three days of use.

Special instructions

• This device can be used by children over 8 years of age and persons with limited physical, sensory or mental abilities or lack of experience and knowledge, if they have been supervised or instructed in the safe use of the device and understand the dangers involved. Children must not play with the device. Cleaning and maintenance of the air cooler must not be performed by children without supervision.
• Be aware that high humidity can promote the growth of biological organisms, such as mold.
• Make sure that the area around the air cooler does not become damp or wet. If moisture occurs, turn down the power or stop the humidifi cation function. Ensure that absorbent materials such as carpets, curtains, drapes or tablecloths do not become damp.
• Never leave water in the tank when the appliance is not in use.
• Empty and clean the air cooler before storage. Clean the storage before the next use.
• Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using the product.
• The batteries contain environmentally hazardous substances. They must be removed from the product before it is scrapped and disposed of safely.
  WARNING
  Danger of injury! Make sure that children do not swallow the battery. If the button cell battery is swallowed, it can cause severe internal burns in only 2 hours and lead to death. If you think that batteries may have been swallowed, consult a doctor immediately.

PRODUCT DESCRIPTION

1. Rolls
2. Water tank
3. Horizontal slats
4. Vertical blinds
5. Air outlet grill
6. Front cover
7. Control panel
8. Function keys
9. Rear cover
10. Remote control cradle
11. Rear filter
12. Ice box
13. Power Cord
14. Cable rewind

CONTROL PANEL AND KEYS

1. On/Off: Switch the unit on and off.
2. Speed : Press several times to select the desired speed: low medium > high. The corresponding indicator light comes on.
3. Mode: Press several times to select the desired mode: Normal > Natural > Sleep. The corresponding indicator light comes on.
4. Air humidification/cooling: coolingSwitch cooling by humidification on and off.
5. timer1: Press several times to select the desired switch-off time: 1h > 2h > 4h > 8h
6. Swing: Switch left/right oscillation on and off.

The buttons on the remote control have the same functions as the buttons on the control panel.

BEFORE THE FIRST OPERATION

Fastening the rolls
Before first use, the rollers must be attached to the front and back of the device.

Filling the water tank

If you want to use the cooling and humidifying function, fill water into the water tank. First pull out the water tank at the back of the appliance and then slowly fill the water into the tank.
Note: In principle you can use your air cooler at any time without water in the tank. It will then work like a normal fan. Water in the tank is only needed for the cooling function. The air cooler evaporates this water via the nebulizer fleece. Heat is extracted from the air and the air temperature of the fan is reduced by up to 3 °C, depending on the cold of the water used. We advise against using the cooling function on days with particularly high humidity, as it increases this humidity and can contribute to circulation problems.

Use of the ice box
The ice box serves to slowly absorb the heat in the water and thus cool down the water temperature in the water tank for several hours, so that the air blown out by the air cooler seems a little cooler.
Place the ice box in the refrigerator freezer until it is completely frozen. Place a frozen ice box in the water tank of the air conditioning fan (the box on the left side of the water tank). Slide the water tank back into place. After about ten minutes the ice box will have cooled down the water in the water tank. This appliance is equipped with two ice boxes to ensure continuous use.

Inserting the battery into the remote control

To open the battery cover, insert a coin or equivalent tool into the slot of the battery cover and turn it in the OPEN direction to open the battery cover. Replace the battery, then turn the battery cover towards CLOSE to close it. When the battery power is low, please replace the battery (CR2032 3V). When inserting the battery, pay attention to the positive and negative terminals of the battery.

OPERATION

After you plug the plug into the power outlet, you will hear a beep and the unit will go into standby mode.

On/Off
In standby mode, press the power button to turn on the device. The other buttons do not work in standby mode. When you start the appliance for the first time, the power light under the power button will come on. The fan starts automatically at low speed and the corresponding light is on.
In case there was no power failure and it is not the first time you start the unit, the last operating state before switching off is maintained (except the timer, sleep mode and filter drying functions). After the first power on, the initial functional state of the device is as follows:

• The low speed indicator lamp lights up.
• The default setting is normal wind.
• The humidification/air cooling function is off.
• The timer is off.
• The oscillation function is off.

When the appliance is on, press the on/off button to switch off all functions and enter standby mode.

Speed
When the device is on, press the speed button several times to adjust the speed as follows: low > medium > high > low. If you change the speed, the fan will stop briefly before moving to the next set speed level.

Filter drying function
When the device is in the on state, press and hold the speed button for 3 seconds. The high speed light flashes continuously. The filter drying function starts and the fan runs at high speed for 20 minutes. During the 20 minute high speed operation, only the On/Off button can be used. The other buttons do not function during the filter drying.

Humidification/Cooling
When the unit is in the on state, press the humidification button to start the Cooling by humidification function. The corresponding light comes on. Press the button again to deactivate the function. If you do not deactivate the function manually, it will go off automatically after 10 hours.

Setting the switch-off time r
When the device is in the on state, press the Timer button several times to select the desired switch-off time: 1h > 2h > 4h > 8h. The corresponding light comes on. After the time has elapsed, the device switches off automatically.

Oscillation function
When the unit is in the on state, press the swing button to make the air flow move alternately to the left and right. The corresponding light will come on. Press the button again to deactivate the function.

Mode
When the unit is in the on state, press the mode button several times to set the mode as follows Normal > Natural > Sleep > Normal. The corresponding light comes on.

Normal| The device operates at the fixed speed set by the user: high, medium

or low.

---|---
Natural| The unit operates at a preset, changing speed and automatically switches from high to medium and low. This mode simulates the effect of natural airflow, making the wind softer and more comfortable.
Sleep| The unit operates at the speed set by the user and reduces the speed according to preset rules. This mode prevents physical discomfort caused by wind at too high a speed during sleep.
If high speed is set at the beginning of the sleep mode, the device will run at high speed for 30 minutes and then run at medium speed for 30 minutes before changing to low speed.
If medium speed is set at the beginning of sleep mode, the device will run at medium speed for 30 minutes before changing to low speed.
If low speed is set at the beginning of sleep mode, the unit will run at low speed constantly.

Important notes on operation

• If there is no key operation within 1 minute when the power is turned on, the indicator light turns dark (33% of the original brightness). The display will light up again as soon as any key is pressed.
• When cooling and humidification have been running continuously for 10 hours, the pump is automatically switched off.
• When the appliance is turned on, the operation light will illuminate and the appliance will run at medium speed by default. After 3 seconds, it switches to low speed and the low speed light comes on.
• If there has not been a power failure and the unit is not starting for the first time, the unit will remain in the operating state before switching off (except for the timer, sleep mode and filter drying functions). If the wind speed was low before the unit was switched off, the fan will start at medium speed and then switch to low speed.
• In sleep mode, the light of the corresponding wind speed level changes as the level is switched.

Notes on tones

• A short beep is generated when any key is pressed.
• A long beep is generated when the unit is turned off by pressing the power button.
• When the timer reaches the set time, no sound is heard.

CLEANING AND CARE

Before cleaning

• Turn off the device and unplug the power cord. Always unplug the power cord before cleaning to avoid electric shock or mechanical damage.
• Use a commercially available cleaning agent and a soft brush for cleaning. Do not use chemical cleaners.

Cleaning the surface

• Wipe the surface with a damp cloth. Do not use water, as it could penetrate the unit and damage the electronics.
• Do not use corrosive cleaning agents or solvents.

Maintenance

• If the product is not going to be in use for a long time, unplug the power cord and pack it away to prevent dust from entering the case.
• After packing, store it in a dry, ventilated place.

Filter cleaning

Remove the filter assembly in the order shown on the left. Clean the filter assembly with detergent and a soft brush, then dry the filter assembly thoroughly before reinserting it in the order shown.

TROUBLESHOOTING

plug firmly into

the socket.

The machine is switched off.| Switch the machine on.
The cabling in the machine has come loose.| Contact a specialist company for repair.
The humidification does not work / The pump makes strange noises.| No water in the water tank or the water level is below the MIN mark.| Switch off the appliance and fill water into the water tank.

HINTS ON DISPOSAL

According to the European waste regulation 2012/19/EU this symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council or your household waste disposal service.
Your product contains batteries covered by the European Directive. 2006/66/EC, which cannot be disposed of with normal household waste. Please check local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health.

PRODUCER: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>