PNi SafeHome PT710B Video Interface WiFi Camera User Manual
- June 4, 2024
- PNI
Table of Contents
PNI SafeHome PT710B
Smart video door phone
Tuya Smart APP
Download the Tuya Smart app by accessing Google Play or App Store or scan the
QR codes below:
|
---|---
https://play.google.com/store/apps/details?id=com.tuya.smart&hl=en|
https://apps.apple.com/us/app/tuyasmart/id1034649547
Add device in Tuya Smart application
- Open the application, create an account and log in.
- Add your device by pressing the + icon in the upper right corner of the screen or by clicking the Add device button (this button appears when you have no device added to the application).
- Select the option Video surveillance on the left side of the screen.
- From the list of devices on the right side of the screen, select Smart Doorbell
- In the next interface, select the option QR Code from the upper right corner.
- Then tick Make sure the indicator is flashing quickly or a prompt tone is heard. Click Next.
- Select the WiFi network you want to connect to and add the password.
- Position the smartphone with the QR code in front of the door phone lens. Wait a few seconds until you hear a confirmation beep and the light ring on the bell turns purple.
- Go back to the application and check I heard a prompt. The application will immediately start scanning nearby devices.
- After the app identifies your device, you will receive the confirmation Added Successfully.
- To finish, click the Done button.
Device control via the application
Options:
- Snapshot: takes an image and saves it in the phone’s memory
- Intercom: press to talk to the person in front of your door
- Recording: press to record video. The recording will be saved in the phone memory.
- View files saved on the SD card inserted in the door phone
- Cloud storage: cloud access (paid option)
- View photos and videos saved in the phone memory
- Access the door phone settings (by clicking on the pencil icon in the upper right corner) to set the sensitivity level of the motion sensor or turn off the PIR sensor, manage power consumption, share your device, or turn on offline notifications and so on.
- When a visitor rings the bell, you will receive a “You have a visitor” notification on the phone accompanied by a repetitive audible warning.
- If you enter the application, you can see who is at the door and you can talk to the visitor. You also receive notifications every time the camera detects movement.
Technical specifications
| Sensor | 1/2.9 CMOS |
|---|---|
| Video resolution | 1920 x 1080px |
| Lens | 3.6 mm |
| Video compression | H.264 |
| Audio | Built-in microphone / Built-in speaker |
| Viewing angle | 166° |
| IR-CUT filter | Yes |
| IR LEDs | 6 LEDs |
| Minimum lighting | 1 Lux |
| WiFi communication frequency | 2.4GHz, IEEE 802.11 b/g/n |
| WiFi transmission power | 100mW |
| RF communication frequency | 433MHz |
| RF emission power | 10mW |
| Storage | SD card, maximum 64GB (not included) |
| PIR | Yes, 3 levels of sensitivity |
| Power supply | Rechargeable battery 2 x 3.7V type 18650 (included) or external |
power supply 14V – 24V AC
Current| max. 170mA
Working temperature| -26°C — +80°C
EU Simplified Declaration of Conformity
SC ONLINESHOP SRL declares that PNI SafeHome PT710B smart video intercom
complies with the Directive EMC 2014/30/EU and RED 2014/53/UE.
The full text of the EU declaration of conformity is available at the
following Internet address:
https://www.mypni.eu/products/7289/download/certifications.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>