oppo X20E1 Enco Air True Wireless Earbuds User Guide
- June 15, 2024
- OPPO
Table of Contents
oppo X20E1 Enco Air True Wireless Earbuds
Overview and package contents
- This box contains a pair of OPPO Enco Air True Wireless Earbuds, a charging case, a USB-C charging cable, a quick start guide, and a safety guide.
Bluetooth pairing
- If you are using your OPPO Enco Air earbuds for the first time, open the charging case with your earbuds inside. The earbuds will automatically enter the pairing made.
- Turn on Bluetooth on your phone:
- Pairing for the first time: Open the charging case with your earbuds inside, and your earbuds will automatically enter pairing mode. You can begin pairing your phone or any other device by going to the device’s Bluetooth setup page and finding nOPPO Enco Airn.
- Quick pairing: Hold your OPPO Enco Air earbuds near an OPPO phone that has Bluetooth turned on. A popup will appear on your phone. Complete pairing according to the onscreen instructions.
Note: Only some OPPO phone models support qui cl:. pairing. For details,
visit www.oppa.com.
Auto reconnection
When you open the charging case with your OPPO Enco Air earbuds inside, your
earbuds will automatically reconnect to the most recently connected device. If
they cannot find or fail to connect to the most recently connected device,
they will enter pairing mode which will allow them to be connected to another
device.
Pairing with other devices
Automatically enter pairing mode: If your OPPO Enco Air earbuds have
automatically reconnected to the last connected device, disconnect the
Bluetooth on that device first, and your earbuds will automatically enter
Bluetooth pairing mode. You can now pair your earbuds with a new device on the
device’s Bluetooth setup page.
Manually enter pairing mode: Wear your earbuds and touch and hold the
control areas on both earbuds for 4 seconds. Your earbuds are ready to be
paired after you hear 4 beeps. You can now pair your earbuds with a new device
on the device’s Bluetooth setup page.
Charging
Battery level
- When your earbuds are inside the charging case, the indicator shows the battery level of the earbuds. When you remove your earbuds from the charging case, the indicator shows the battery level of the charging case itself.
- Different indicator colors are used to show the battery level: red indicates low, yellow indicates medium, and green indicates full or sufficient Charging your earbuds
- To charge your earbuds, put them inside the charging case and close the case lid. Charging the charging case
- To charge your charging case, connect it to a power source using the included USB-C charging cable.
- The indicator will light up when charging. Yellow indicates charging in progress, and green indicates that charging is complete.
- Charge the charging case and earbuds regularly. Leaving your earbuds or charging case fully discharged for more than two months may damage the battery inside
- Mal: Ensure the charging pins of the earbuds and charging case are dry and clean before charging. Otherwise, they can be damaged by corrosion.
Touch Controls
Function
|
Left
|
Right
---|---|---
Next track
|
Double-top
|
Double-top
Answer/End calls
|
Double-top
|
Double-top
Voice Assistant
|
Triple-top
|
Triple-top
- Voice Assistant is available only on some phone brands or models.
Custom settings
- You can customize touch control settings for the left and right earbuds on your phone. ColorOS
- Go to “OPPO Enco Air – EARBUDS FUNCTIONS” on the Bluetooth setup page of your phone to customize settings.
- Available on phones running ColarOS 11.0 and later versions. Android
- Find the “HeyMelody” app in your app store and install it. You can customize touch settings in the opp.
- Available on phones running Android 6.0 and later versions.
- Go to the product details page on OPPO’s official website to view the list of app stares where the ‘HeyMelody’app is available
Reset to factory settings
Touch and hold the touch control areas on both earbuds for 15 seconds until
you hear an alert tone. This will reset the earbuds to factory settings.
Specifications
Earbuds model
| ****
ETl61
---|---
Charging case model
| ****
ETl62
Driver
| ****
12 mm dynamic driver
Frequency response range
| ****
20 Hz – 20 kHz
Microphone sensitivity
| ****
-38 dBV/Pa
Bluetooth codec
| ****
AAC/SBC
Bluetooth version
| ****
5.2
Bluetooth range
| ****
10 m
Battery type
| ****
Recha rg able Li-ion Battery
Battery capacity
| 25 mAh (earbuds)
440 mAh (charging case)
Media playback time (50% volume)| 4 h (single charge)
24 h (with charging case)
Charging time*
| 1.5 h (earbuds)
1.5 h (earbuds + charging case)
Charging input (charging case)
| ****
5 V 2 A
- All these specifications were obtained based on tests in OPPO laboratories. The battery capacity, media playback time, and charging tines were tested in OPPCJ laboratories at a temperature of 25°C using an OPPO standard charger. The actual results may differ slightly based on environmental factors and the charger used.
- His guide is provided for reference only. Functions and features may differ depending on the product.
Copyright © Guangdong OPPO Mobile Telecommunications Corp., Ltd. 2021. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>