ROUGH COUNTRY 9312X Polaris Ranger Rear-Facing 50 Inch Led Light Kit Instruction Manual
- June 3, 2024
- Rough Country
Table of Contents
ROUGH COUNTRY 9312X Polaris Ranger Rear-Facing 50 Inch Led Light Kit Instruction Manual
Thank you for choosing Rough Country for all your vehicle needs.
Please read instructions before beginning installation. Check the kit hardware
against the kit contents shown below. Be sure you have all needed parts and
know where they go.
If question exist, please call us
@1-800-222-7023. We will be happy to
answer any questions concerning this product.
Check all fasteners for proper torque. Check to ensure for adequate clearance
between all components.
Periodically check all hardware for tightness.
KIT CONTENTS:
Dr Side Light Bracket x1
Pass Side Light Bracket x1
TOOLS NEEDED:
T30 Torx Bit
HARDWARE INCLUDED:
6mm x 35mm Bolts x2
6mm Flat Washers x2
Torque Specs:
INSTALLATION INSTRUCTIONS
-
Remove the outside rear bolts on the roof using a T00 Torx bit. See Photo 1.
-
Install the brackets using the supplied hardware. See Photo 2.
-
Install the LED light bar to the brackets using the hardware supplied with the light. **See Photo 3.
**
- Route the wiring for the light as desired making sure it’s away from heat sources and moving parts.
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applicable, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyers responsibility to comply with all Federal, State and Local laws governing the sales of any items listed, illustrated or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>