Belkin 08346 wireless charging pad audio User Manual

: June 5, 2024
: belkin

Table of Contents

FCC Compliance Statement
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Belkin 08346 wireless charging pad audio User Manual

FCC Compliance Statement

We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the product, WSC010, to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Innovation, Science and Economic Development (ISED) Canada Compliance Statement

CAN ICES-003 (B)/NMB-003 (B)

This device complies with ISED’s license-exempt RSS standards. Operation is subject to the following two conditions:

This device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device.

The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology.

This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with ISED multi-transmitter product procedures.

This device has been designed to operate with an antenna having a maximum gain of -2 dBi at 2.4 GHz. Antenna having a higher gain is strictly prohibited per regulations of ISED. The requiredantenna impedance is 50 ohms.

The maximum antenna gain to comply with the EIRP limit is provided in the table below.

Antenna No.	Antenna Type	Antenna Gain (dBi)	Antenna Connector
BT/Thread	IFA	-2	N/A

Radiation Exposure Statement:

This equipment complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment.

Safety Caution:
When using this product, basic precautions should always be followed, including, but not limited to, the following:

Unplug device prior to cleaning. Use dry cloth on exterior of the device. To avoid shock hazard and/or damage to device, DO NOT use any liquid solution.
Do not use this product near the water, for example, in a wet basement or near a swimming pool.
Keep this product away from heat sources, direct sunlight, combustible gas, humidity, water, or other liquids.
Do not use this product if visible defects are observed or if it has been wet or damaged or modified. Contact the customer service support of Belkin for assistance.
Do not disassemble, open, microwave, incinerate, paint, or insert foreign objects into this product.
Do not expose this product to fire or high temperature. Exposure to fire or high temperature may cause explosion.
Do not expose this product to mechanical shock such as crushing, bending, puncturing, or shredding. Avoid dropping or placing heavy objects on this product.
Please read the operating instructions and information on the minimum and maximum operating temperatures supplied with this product.
To reduce the risk of injury, close supervision is necessary when this product is used near or by children.
This product is intended for indoor use only.
Use of this product in a manner not recommended in these instructions may result in a risk of injury to persons.