BLAUPUNKT HDD501 Hair dryer Owner’s Manual

HDD501
Owner′s ManualEnjoy it.
Hair dryer

IMPORTANT NOTES

Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.

• This device is for domestic use only. Do not use it for any other purposes.
• The device should only be connected to a socket with values corresponding to the values on the rating label.
• It is necessary to check if the total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.
• If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards. Do not let the cord hang over the edge of the counter, or touch any hot surface.
• The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.
• Before maintenance work always disconnect the unit from the power supply.
• When unplugging the power cord from the electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord. Damage to the power cord or plug can lead to an electrocution hazard. Never leave the product connected to the power source without supervision.
• Never put the power cable, the plug, or the whole device into the water or any other liquids.
• The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.
• Do not place the device near sources of heat, flame, an electric heating element, or a hot oven. Do not place it on any other device.
• This equipment can be used by children aged 8 years and over as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience in using this equipment, must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of this equipment. Children should not play with the equipment. Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment.
• Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.
• Never use the product close to combustibles.
• Never expose the product to atmospheric conditions such as direct sunlight or rain, etc… Never use the product in humid conditions (like a bathroom or camping house).
• The power cable should be periodically checked for damage. If the power cable is damaged the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising.
• Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product by yourself as it can lead to electric shock. Always return the damaged device to a professional service in order to repair it. All the repairs should only be performed by authorized service professionals. Any attempted unauthorized repairs performed can be a hazard to the user. Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories that are not recommended by the manufacturer may result in damage to the device and may render the device unsafe for use
• Warning! Do not use this equipment close to baths, showers, sinks, swimming pools, and similar water sources.
• In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating of no more than 30 mA. Contact a professional electrician in this matter
• Do not immerse the unit in water and do not allow the device to get wet. In case of falling down into water unplug immediately. Do not put your hands into the water if the device is plugged in. Before next use, the appliance should be checked by a qualified electrician.
• Do not touch the appliance with wet hands.
• Do not wrap the cord around the appliance.
• Do not direct hot air toward the eyes or other sensitive areas.
• Regularly remove dirt from the inlet filter.
• Do not place or insert any metal objects into the exhaust grille or the inlet filter.
• Do not block the airflow by covering the inlet filter or blower grille.

The device is compliant with EU directives:
– Low voltage directive (LVD)
– Electromagnetic compatibility (EMC) Device marked CE mark on the rating label

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. The used appliances should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose of this appliance In the common waste bin.

Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer), and polyethylene (bags, protective foam sheet). Your system consists of material that can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries, and old equipment.

**** Your products are designed a manufactured with high-quality materials and components, which can be recycled and reused.

TECHNICAL DATA

Power: 2000W
Power supply: 220-240V-50Hz

1. Concentrator nozzle
2. Handle
3. Inlet filter
4. Power switch
5. Temperature control
6. Cool shot button
7. Diffuser

OPERATION
Connect the power cord to the power supply. Set the desired blowing level using the switch (4)
0 – Off
1 — Lower airflow level
2 — Higher airflow level Set the desired blowing temperature using the temperature control (5)
0 — Cool shot
1 — Lower temperature
2 — Higher temperature

NOTE: If the cool shot button (6) is turned on, the cool shot mode is active regardless of the temperature set with the temperature control (5)
After the completion of drying hair, disconnect the device from the power by removing the plug from the socket.

CLEANING AND MAINTENANCE

Before cleaning, make sure that the dryer has been disconnected from the power supply. The hair dryer housing may be wiped with a slightly damp cloth, then it should be immediately wiped dry. Do not allow water to enter the hair dryer. It is recommended that dirt be removed from the inlet filter regularly as it can restrict the airflow. You can remove the inlet filter by gently turning it according to the symbols printed on the hair dryer housing and pulling it out.

Enjoy it.
Competence Center
2N-Everpol Sp. z o.o.
ul. Pulawska 403A
02-801 Warsaw, Poland
phone: +48 22 331 99 59
e-mail: info@everpol.pl
www.blaupunkt.com
In case of questions or problems please contact our service.
Tel. 00 48 22 331 99 54
E-mail: sda@blaupunkt.pl
All rights reserved. All brand names are registered trademarks of their respective owners.
Specifications are subject to change without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>