TAKSTAR WPM-300 Wireless Monitoring System Instruction Manual
- June 5, 2024
- TAKSTAR
Table of Contents
WPM-300 Wireless Monitoring System
Instruction Manual
Operation Instructions
- Connect the transmitter to the supplied adapter, and plug the adapter into the AC mains socket for the power supply.
- Connect the transmitter audio input with the audio output device using the adapter cable.
- Turn on the transmitter power, its LED screen and indicator light up if working properly.
- Pinch both the retractable buttons on the battery compartment to take out the battery holder, install 2 pieces of AA batteries, push the battery holder back into the compartment until it clicks into place.
- Insert the headphone plug into the headphone jack on the receiver.
- Press and hold the receiver power button for 2s to power up the receiver, indicated by its lit LED.
- Press the SET button to switch to the same frequency channel as the transmitters. The receiver screen signal icon will become lit when paired successfully.
- Press the – or + button on the receiver to adjust the volume to the desired level.
Safety Instructions
To avoid electric shock, overheating, fire, radiation, explosion, mechanical risk, and injury or property loss due to improper use, please read and observe the following items before use:
- Please check if the power of the connected equipment matches that of this product before operation. Adjust the volume to the proper level during operation. Do not operate at over-power or high-volume levels for an extended time to avoid product malfunction or hearing impairment.
- If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from the power source, then send the product to the local dealer for repair.
- Keep this product and its accessories in a dry and ventilated area. Do not store in a humid or dusty area for an extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing, vibrating, or blocking any ventilation openings, to prevent malfunction.
- Please abide by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accidents.
- Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local dealer.
Label Meanings
According to the test results obtained based on RL2004/108/EG (Electromagnetic Compatibility Directive) and RL2006/95/EG (Low Voltage Directive), this product complies with the limits specified in the European Community EMC (Electromagnetic Compatibility) Directive, integration of relevant laws from its member states.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the complying party may cause the user to lose permission to operate the device. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation.
FCC ID:WRAWPM-300TX
This symbol indicates that, according to the WEEE (Waste of Electrical and
Electronic Equipment) Directive (2012/19/EU) and national laws,
this type of waste should not be discarded along with your household waste, as
it contains potentially hazardous substances that may pose a negative impact
on the environment and human health. It should be handed over to an authorized
WEEE collection facility for recovery and recycling. Herewith you will be
helping effective utilization of natural resources. For more information on
the disposal of WEEE products, please contact your local municipality, waste
management bureau or household waste disposal service.
About This Manual
contains up-to-date technical specifications as of printing. However, the specifications contained herein may not conform to your particular product since Takstar is constantly improving its products. For the latest version/more information, please visit our website: https://www.takstar.com/. Specifications, devices or accessories available may vary from region to region. If you have any questions, please contact our local dealer.
Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang YiRd., Longxi Boluo
Huizhou, Guangdong 516121 China
Tel: 86 752 6383644 Fax: 86 752 6383952
Email: sales@takstar.com
Website: www.takstar.com