UMIDIGI RP03 Bison GT2 5G Flagship Smart Phone User Manual
- June 5, 2024
- Umidigi
Table of Contents
BISON GT2 RPO3
Thanks for choosing UMIDIGI products
www.umidigi.com
Amazon service
Email: amazonservice@umidigi.com
Building a great phone is hard enough, so building a great phone on a budget
should be infinitely more difficult. Big thanks to all who made this
superphone super awesome by contributing valuable time and developing
hardware, software & other developments. Thanks for choosing UMIDIGI products,
thanks to your support our value can be realized and we can constantly move
forward to create smart devices with better user experience.
www.umidigi.com
Scan the following QR-codes to follow us and enter the giveaway to win a
UMIDIGI smart device for free!
**| 
**
---|---
|
|
https://www.facebook.com/Umidigi
| https://twitter.com/umidigi
|
UMIDIGI is a registered trademark by Shenzhen Youmi Intelligent Technology
Co., Ltd.
All other trademarks are the property of their respective owner.
Visit www.umidigi.com for more information
PRODUCT HEX-VISION IMAGE
POWER BUTTON: Long press to turn on the device; When the device is on, short press the Power Button to shut down or turn on the screen.
VOLUME BUTTON: Short press to adjust the volume or to mute incoming calls.
CARD INSERT MANUAL
Insert Nano-SIM Card
Please face the chip side of the Nano-SIM card adown when inserting it into
the slot. Be aware of the direction of the cut edge when placing the Nano-SIM
card into the slot.
Reminder:
Please use a standard Nano-SIM card. Please don’t use a non-standard card that
is hand-cut, in order to prevent the SIM slot and card tray from being damaged
and card-rejection situation that may cause damage to the phone.
TF Card Installation
Please place the metal contact of the TF card adown and be aware of the
direction of the cut edge. Place the card onto the tray and insert it into the
device.
Reminder:
Please turn off the phone before changing or replacing the TF card.TF card
does not come with the phone, please purchase separately.
Please do not plug in and out of the SIM card tray when the phone is on. Be
careful when using the slot thimble from scratching the phone.
DUAL-SIM MANAGEMENT
Please choose which SIM card slot to be the main one to be for the 4G network
via Setting > SIM Card. Choose your preferred network types of 4G/3G/2G via
Setting>Network&Internet>Mobile network >Preferred network type
FINGERPRINT IDENTIFICATION
You can unlock the screen with the fingerprint ID function. Click Setting>Security&Location>Fingerprint, please enter your fingerprint information by following the instructions on the screen.
Reminder:
Please ensure your finger is clean and dry when giving your fingerprint
information to the phone.
Please enter the information of your finger pulp for fingerprint information.
When unlocking the phone by fingerprint, please
place your finger pulp on the Touch ID sensor for about a second.
NETWORK CONNECTION
Connecting WLAN Into the setting of WLAN via Settings>Network&Internet>Wi-Fi
When WLAN is on, a list of available WiFi connections will appear. Click on
the one you want to connect to, enter the password if the network is
encrypted, then click Connect. When it’s a public network, just click Connect
When the network shows “connected”, it is available to use
Bluetooth Function
Into the setting of Bluetooth function via Settings>Connected
devices>Bluetooth Enable the Bluetooth function by clicking the Menu Button
then select “Refresh”, then the phone will search for available Bluetooth
devices for pairing and list on the screen. Click on the one you want to pair
with, then click “Pair” on the dialog pop-up. Documents are available for
transmission after Bluetooth pairing.
Reminder:
Slide down the status bar twice to open the shortcut switches for Bluetooth
and other functions.
WLAN Hot-spot Setting Click on via Settings>Network&Internet>Hotspot&tetherirg
Wi-Fi hotspot to turn on the Portable WLAN Hot-spot function. When setting up the WLAN hot-spot, enter your user name in “Network Name” and password, then click Save. Another device can use the WLAN hot-spot by searching and entering the password of the password.
Reminder:
Please enable the Data Connection before enabling the network sharing
function. Your mobile traffic will be shared by other devices, so please use
it carefully. The signal of the WLAN hot-spot depends on the signal strength
and devices
CAMERA
Aim the camera at the shooting object, and the phone will start focusing
automatically; or you can click on the screen to choose the object you want to
focus on, then click the “Capture” icon to take photos. You can also choose
other modes such as video recording, beautifying, and panorama to take
photos/videos.
INSTRUCTIONS FOR DUAL-CARD STANDBY
“Dual card, dual standby, single-pass” means you can insert two SIM cards and
have them both “standby”, but cannot make phone calls at the same time. During
the standby mode, both cards are available for receiving phone calls, but once
one of the cards is activated, the other one cannot receive phone calls nor
make phone calls.
SECURITY INFORMATION
Security information (including BS, ES, and battery security information) of
third-party software installation and function may vary in different regions
or by different hardware specifications. UMIDIGI holds a disclaimer for the
performance problem or incompatibility caused by third-party applications,
registry editing, and OS software modification. Customizing the OS may cause
the device or some applications to fail to work properly.
Please prevent the device or the battery in extreme cold/hot conditions. The
extreme temperature will lead to the deformation of the phone and reduce the
charging capacity and battery life.
Please only use the custom-designed and approved battery and recharger by
UMIDIGI. An incompatible battery and recharger may cause damage to the phone.
Please abide by local regulations when disposing of the used batteries and
phones.
Please do not place the battery or the phone onto or inside heating devices
such as microwaves, ovens, or radiators. The battery may explode if it gets
too hot.
Please do not crush or pierce the battery. Prevent the battery from getting
high pressure from outside, it may cause internal short and overheat
SPECIFICATION
BASIC INFORMATION
Operating System
CPU
GPU
RAM
ROM
Battery
Touch ID| RPO3
Android™ 12
MediaTek, MT6785V/CD (Helio G95), 2xCortex-A76 + 6xCortex-A55, up to 2.05GHz
ARM Mali G76 MC4 900MHz
8GB
128GB
6150mAh
Side-mounted Fingerprint sensor
Display
Screen Size
Resolution
Touch| 6.5 inch
2400×1080 Pixels
Capacitive multi-touch
Cameras
Rear Camera Front Camera
Connection(I/O)| 64MP+8MP+5MP Camera 24MP Camera
Band
NFC
SIM/TF card WIFI
Bluetooth
GNSS
FM
Earphone Port
USB Port| 4G:LTE FDD B2/5/12/13 LTE TDD B41
3G: WCDMA B2/5
2G: GSM B2/5
Yes
Dual Nano SIM Card Or Nano-SIM and TF Card IEEE802.11 a/b/g/n/ac
Bluetooth 5.0
GPS, Beidou, Glonass,Galileo
Yes 3.5mm
Type-C
Other Features
Video File Format
Audio File Format
Card Extend
Language
Sensor| 3GP/MPEG4,etc. WAV/MP3/AAC/AMR/MIDI/APE/WMA,etc.
Support TF card up to 512GB.
Support Multi-language
Barometer, Infrared Thermometer Sensor, Proximity Sensor, Ambient Light
Sensor, Accelerometer, Gyroscope, Compass.
In the box
lx Phone
lx Screen Protector (pre-applied)
lx Type-C Cable
lx Power Adapter
lx SIM Tray Ejector
lx Quick Start Guide
Safety Statement
FCC Caution: Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
ISEDC Warning Operation of 5150-5250 MHz is restricted to indoor use only.
This device complies with Innovation, Science, and Economic Development Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device.
Specific Absorption Rate (SAR) information SAR tests are conducted using
standard operating positions accepted by the FCC/ISEDC with the phone
transmitting at its highest certified power level in all tested frequency
bands, although the SAR is determined at the highest certified power level,
the actual SAR level of the phone while operating can be well below the
maximum value. Before a new model phone is available for sale to the public,
it must be tested and certified to the FCC/ISEDC that it does not exceed the
exposure limit established by the FCC/ISEDC, tests for each phone are
performed in positions and locations as required by the FCC/ISEDC.
For body-worn operation, this model phone has been tested and meets the
FCC/ISEDC RF exposure guidelines when used with an accessory designated for
this product or when used with an accessory that contains no metal and that
positions the handset a minimum of 10mm from the body. Non-compliance with the
above restrictions may result in a violation of RF exposure guidelines.
| **** | BE | BG | CZ | DK | DE | EE | IE | EL |
|---|---|---|---|---|---|---|---|---|
| ES | FR | HR | IT | CY | LV | LT | LU | |
| HU | MT | NL | AT | PL | PT | RO | SI | |
| SK | II | SE | NO | IS | LI | CH | TR |
In all EU member states, the operation of 5150-5250 MHz is restricted to indoor use only.
Follow the UMIDIGI community. a place where you can share and discuss with UMIDIGI users and keep posted with the most up-to-day news.
The E-label information
Scroll through the menu to find and select Settings
Scroll down in Settings to find and select About Glasses
| ****
---|---
Manufacturer: Shenzhen Youmi Intelligent Technology Co., Ltd.
Add:406-407 Jinqi Zhigu Building,4/F,1 Tangling Road, Nanshan District,
Shenzhen City, Guangdong Province China.
Made in China
The e-label will display Regulatory information
Regulatory labels
Europe&UK
Certification No.: XXXXXXXX
DIRECTIVE 2014/53/EU
EU TYPE EXAMINATION CERTIFICATE
NOTIFIED BODY: 1313 Attestation
Number:XXXXXXXXXXXXXXXX US
FCC ID: 2ATZ4-BGT2P
Japan
R 211-220402
T A04220011211
Canada
IC: 26074-BGT2P
HVIN: H872 MB
TAC Identifier: XXXXXXXX
Certification No.: 26074-BGT2P
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>