GUDE GSH 5T 18041 Hydraulic jack Instructions
- June 5, 2024
- Gude
Table of Contents
GUDE GSH 5T 18041 Hydraulic jack
DELIVERED ITEMS
Operation
Technical Data
Bottle jack| GSH 2T| GSH 5T| GSH 10T|
GSH 20T
---|---|---|---|---
Art. No| 1840| 1841| 1842| 1843
Max. lifting capacity| 2 t| 5 t| 10 t| 20 t
Max. lifting height| 148-276 mm| 185-355 mm| 195-375 mm| 217-407 mm
Weight| 2,2 kg| 3,8 kg| 5,7 kg| 9,8 kg
Read and understand the operating instructions before using the appliance. Familiarise with the control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties. The operator is responsible for accidents or risks to third parties. Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education. In case of any doubts about connection and operation refer please to our customer center
WARNING Read all safety warnings and all instructions. Save all warnings and instructions for future reference.
Specified Conditions Of Use
The jack may be used only for temporarily lifting a vehicle. The jack may not be used for lifting persons. Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages. The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts. Keep your work area clean and tidy. Untidy work-places and workbenches increase the risk of accidents and injuries. The lift rod or car lifter itself may be a tripping hazard. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. Do not overreach. Keep proper footing and balance at all times. Never load the jack above the rated lifting capacity.
- Put the lifter on a solid, firm and flat surface when lifting load.
- Make sure the bleeder screw is screwed firmly before lifting load.
- Vehicles to be lifted need to be sufficiently secured against rolling away before they are actually lifted. Never place the lifter askew or slantwise to the lifting plane.
- Fix the lifter to the vehicle only at locations specified by the manufacturer.
- Control the jack and the load during all movements in order to be able to react promptly in the event of a fault.
Risk of injury
Staying under lifted load is strictly prohibited. Never work under lifted load
that is supported only by the lifter. Lifted load must be secured/supported by
separate trestles or, as appropriate, brackets.
It is only possible to work on and under lifted vehicles when they are
sufficiently secured and supported to make sure: they do not turn over and
slip. Make sure nobody is leaning against lifted vehicle or lifted load. Never
move load using the car lifter. Moving lifted load may lead to lifter damage
and failure. Have your device repaired only by qualified professional staff
using original spare parts.This will ensure that the safety of the power tool
is maintained. Ensure that the warning signs are always in good working order.
If the device is blocked, the user must lift the vehicle with another jack
until the blocked jack is released and can be removed. Tools which are not in
used must be stored in a dry place as high as possible out of the reach of
children or in an inaccessible place.
Residual risks
Even when the device is used properly and all safety regulations are complied
with, there still may be some residual risks.
Emergency procedure
Conduct a first-aid procedure adequate to the injury and summon qualified
medical attendance as quickly as possible. Protect the injured person from
further harm and calm them down. If you seek help, state the following pieces
of information: 1. Accident site, 2. Accident type, 3. Number of injured
persons, 4. Injury type(s)
Symbols
- WARNING / Caution!
- WARNING – Read the operating instructions to reduce the risk of injury.
- Wear gloves!
- Wear safety shoes with steel reinforcement!
- Never load the jack above the rated lifting capacity.
- Do not stand on the device and do not try to ride it.
- Keep dry at all times.
- Never expose tool to rain.
- Warning against risk of tripping
- Keep bystanders in safe distance from the appliance (at least 5m)
- Warning against hand injury / bruising CE marking
Maintenance
Do not modify the device. Modifications are considered to be a use other than as intended and can result in injuries and damage. Repairs and works specified in these Instructions may only be performed by qualified authorised staff. Use only original accessories and original spare parts. Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries. Never clean the machine and its components with solvents, flammable or toxic liquids. Us only a damp cloth making. Apply environment-friendly oil to all moving parts. If necessary, a list of spare parts can be found at www.guede.com
Disposal
Any damaged or disposed devices must be delivered to appropriate collection
centres. Dispose of old oil in an environmentally friendly manner.
Guarantee
Warranty period of 24 months applies to private use and commences on the day of purchase of the device. The guarantee solely covers inadequacies caused by material defect or manufacturing defect. Original payment voucher with the sales date needs to be submitted for any claim in the guarantee period. The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.
Important information for the custome r
Please be sure to know that returning the product in or after the warranty
period must be made in the original packaging
Service
Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label.
- Tel.: +49 (0) 79 04 / 700-360
- Fax: +49 (0) 79 04 / 700-51999
- E-Mail: support@ts.guede.com