nVent CADDY CRLMIP Rod Lock Metal Decking Preset Anchor Insert Owner’s Manual
- June 16, 2024
- nVent Caddy
Table of Contents
nVent CADDY CRLMIP Rod Lock Metal Decking Preset Anchor Insert
Product Information
Specifications
- Catalog Number: CRLMIP
- Material: Steel
- Finish: Pre-galvanized
- Hole Size 1: 3/4
- Hole Size 2: 7/8
- Hole Size 3: 0.260
- Length: 12″
- Width: 1 1/2″
- Thickness: 0.140″
- A: 3″ Max
- B: 10″ Max
Product Usage Instructions
Installation
- Ensure you have read and understood the product instruction sheets available at www.nvent.com or from your nVent customer service representative.
- Identify the suitable location for installing the nVent Caddy Rod Lock Metal Decking Preset Anchor Insert.
- Make sure the hole sizes match the requirements specified for Hole Size 1, Hole Size 2, and Hole Size 3.
- Position the anchor insert correctly and align it with the pre-drilled holes.
- Insert the anchor insert into the holes, ensuring a secure fit.
Maintenance
To ensure proper functioning and longevity of the nVent Caddy Rod Lock Metal
Decking Preset Anchor Insert, follow these maintenance guidelines:
- Regularly inspect the anchor insert for any signs of damage or wear.
- Clean the anchor insert using a mild detergent and water solution, if necessary.
- Replace the anchor insert if it becomes damaged or no longer provides a secure fit.
Warning
It is crucial to follow nVent’s instructions and warnings to prevent product
malfunction, property damage, serious bodily injury, and death. Failure to do
so may also void your warranty.
FAQ
-
Where can I find the product instruction sheets?
You can find the product instruction sheets on the nVent website at www.nvent.com or by contacting your nVent customer service representative. -
What should I do if the anchor insert does not fit securely into the holes?
If the anchor insert does not fit securely into the holes, ensure that the hole sizes match the requirements specified for Hole Size 1, Hole Size 2, and Hole Size 3. If the issue persists, contact nVent customer service for further assistance. -
How often should I inspect and clean the anchor insert?
We recommend regularly inspecting the anchor insert for any signs of damage or wear. Cleaning should be done as needed using a mild detergent and water solution. -
Can I reuse the anchor insert if it becomes damaged?
No, it is essential to replace the anchor insert if it becomes damaged or no longer provides a secure fit. Reusing a damaged anchor insert can compromise the safety and effectiveness of the installation.
FEATURES
- Allows for the installation of levelled nVent CADDY Rod Lock Metal Decking Preset Anchors anywhere between the metal decking ribs
- Symmetrical design with two insert holes for each size of Rod Lock Metal Decking Preset Anchors
- Compatible with a very wide range of metal decking
- Rod Lock Metal Decking Preset Anchors can be easily inserted through the insert plate while maintaining a tight positioning of the anchor
- Holes on each end of the insert for fixing to metal deck with self-tapping screws or nail gun
- Quick and easy installation
PRODUCT ATTRIBUTES
- Material: Steel
- Finish: Pre-galvanized
- Hole Size 1: 3/4″
- Hole Size 2: 7/8″
- Hole Size 3: 0.260″
- Length: 12″
- Width: 1 1/2″
- Thickness: 0.140″
- A: 3″ Max
- B: 10″ Max
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse, misapplication
or other failure to completely follow nVent’s instructions and warnings may
cause product malfunction, property damage, serious bodily injury and death
and/or void your warranty.
Europe
- Netherlands: +31 800-0200135
- France: +33 800 901 793
Europe
- Germany: 800 1890272
- Other Countries: +31 13 5835404
APAC
- Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent