Niya Sonar 50 Robotic Pool Cleaner

“`html

Product Information: Niya Sonar 50 Robotic Pool Cleaner

Specifications:

• Reliable filtration in all pool conditions
• Active brushing and all-surface climbing brush
• Advanced cleaning technology
• Long-lasting performance
• Easy maintenance

Product Usage Instructions:

Important Safety Instructions:

Please read and follow all safety instructions before using the
Niya Sonar 50 Robotic Pool Cleaner:

1. Use only the original battery and battery charger
   provided.

2. Keep the device out of the reach of children and vulnerable
   persons.

3. Handle the battery casing carefully to avoid fire or
   burns.

4. Avoid inserting hands/fingers into the impeller motor
   area.

5. Remove the cleaner from the pool before allowing people to
   enter.

6. Always switch OFF the device before cleaning filters or
   examining the robot.

7. Be cautious when lifting the device to avoid injury.

8. Do not use the device if there is any mechanical damage.

9. Avoid using an extension cord with the battery charger.

Routine Maintenance:

Refer to the user manual for detailed routine maintenance
instructions. Ensure to follow recommended maintenance schedules
for optimal performance and longevity of the pool cleaner.

Battery Replacement:

When replacing the battery, make sure to use only the specified
original battery for compatibility and safety reasons. Follow the
instructions provided in the user manual for proper battery
replacement.

Storage:

Store the robotic pool cleaner in a cool, dry place away from
direct sunlight. Proper storage helps prolong the life of the
device and its components.

FAQs and Troubleshooting:

Q: Can I use a different battery charger with the Niya Sonar 50

Robotic Pool Cleaner?

A: It is recommended to use only the original battery charger
provided to avoid compatibility issues and ensure safe
charging.

Q: How often should I clean the filters of the robotic pool

cleaner?

A: Regularly check and clean the filters as per the maintenance
schedule outlined in the user manual. Frequency may vary based on
pool usage and debris accumulation.

“`

Robotic Pool Cleaner User Guide
EN

TABLE OF CONTENTS
1 About the Niya Sonar 50 Robotic Pool Cleaner ……………………………………………….. 3
2 Important Safety Instructions…………………………………………………………………………… 4
3 Specifications ………………………………………………………………………………………………… 5
4 Pool Cleaner Parts …………………………………………………………………………………………. 6
5 Use the Pool Cleaner ……………………………………………………………………………………… 7 5.1 Before You Start …………………………………………………………………………………… 7 5.2 LED Indicators……………………………………………………………………………………… 7 5.3 Charge the Pool Cleaner………………………………………………………………………. 7 5.4 Place the Pool Cleaner in the Pool ………………………………………………………… 8 5.5 Pool Cleaner Modes …………………………………………………………………………….. 8 5.6 Remove the Pool Cleaner from the Pool ………………………………………………… 9 5.7 Switch Off the Pool Cleaner………………………………………………………………….. 9 5.8 Clean the Pool Cleaner ………………………………………………………………………… 10
6 Mobile Bluetooth Application Information ………………………………………………………… 11 7 Routine Maintenance ……………………………………………………………………………………… 12
7.1 Battery Replacement ……………………………………………………………………………. 12 7.2 Storage ……………………………………………………………………………………………….. 13 8 FAQs and Troubleshooting ……………………………………………………………………………… 14

2|

| Robotic Pool Cleaner User Guide

1 ABOUT NIYA SONAR 50 ROBOTIC POOL CLEANER
Thank you for purchasing a Maytronics Niya Sonar 50 Robotic Pool Cleaner.
We are sure that your Maytronics Niya Sonar 50 Robotic Pool Cleaner will provide you with reliable, convenient and cost-effective pool cleaning.
Its reliable filtration in all pool conditions, active brushing, and all- surface climbing brush enhance maximum pool hygiene.
Maytronics Robotic Pool Cleaners deliver advanced cleaning technology, long lasting performance and easy maintenance. You and your family will be free to enjoy swimming with full confidence that your pool is completely clean.

| Robotic Pool Cleaner User Guide

3

|

2 IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ AND FOLLOW ALL INSTRUCTIONS
Please adhere to the following warnings and cautions before you use the Niya Sonar 50 Robotic Pool Cleaner.
Use the device only according to these safety instructions. Maytronics is not liable for any loss or injury caused by improper use of the device.
1. Use only the original battery and battery charger provided. 2. Keep the device out of the reach of children, vulnerable persons (with reduced
physical, sensory or mental abilities), and persons who lack the requisite knowledge and experience. Users must receive appropriate instruction and supervision before using the device. Do not allow children to perform cleaning or maintenance tasks.
3. Be careful when handling the battery casing to avoid the risk of fire and/or burns. Do not open it or crush it and do not place it near a source of heat.
4. Do not insert hands and/or fingers into the impeller motor area. 5. Remove the robotic pool cleaner from the pool before allowing people to enter the pool. 6. Always switch OFF the device before cleaning the filters and /or examining the robot. 7. Be careful when lifting the device to avoid bodily injury. 8. Do not use the device and/or its battery in case of any mechanical damage. 9. Do not use an extension cord to connect the battery charger to electric socket.
Use only an appropriately located power outlet.
10. In case of power cord is damaged the entire charger must be replaced with original. 11. Place the battery charger at least 3.5 m / 12 ft from the pool edge during operation. 12. Place the battery charger at least 11 cm / 4 in above the ground to protect users
against electric shock.
13. Use a Residual Current Device (RCD) with a rated residual operating current not exceeding 30mA to power up the battery charger.
For USA/Canada installations:
·The battery charger should be connected only to a power supply circuit that is protected by a Ground Fault Circuit Interrupter (GFCI). This GFCI should also be tested on a routine basis.
·To test the GFCI, push the Test button. The GFCI should interrupt the power. Push the Reset button. The power should be restored. If the GFCI fails to operate in this manner, the GFCI is defective.
·If the GFCI interrupts power to the battery charger without the Test button being pushed, a ground current may be flowing, indicating the possibility of electric shock. Do not use the battery charger. Disconnect the battery charger and contact the manufacturer for assistance.
14. The Lithium-Ion battery should be recycled at a certified battery electronics recycler. Batteries should NOT be discarded as waste or placed in municipal recycling bins. Do not disassemble the battery.
PLEASE SAVE THESE INSTRUCTIONS.

4|

| Robotic Pool Cleaner User Guide

3 SPECIFICATIONS
The Maytronics Niya Sonar 50 Robotic Pool Cleaner product complies with EU Regulation & Directive 2014/53/EU.
For full EU declaration of conformity, please visit: www.maytronics/download

Item Pool Length Water Depth Power Adapter/AC Input Power Adapter/DC output Power Adapter/Rated Power Lithium Battery Cleaning Cycle Time Charge Time Filtration System Moving Velocity Smartphone App Connection Protocol Dimensions (L x W x H) Net Weight Battery model Motor and Battery Protection Storage Temperature Water Conditions

Supported Values

Up to 12 m ( 39.4 ft)

0.4 m-2.5 m (1.3 ft-8.2 ft)

100-240 VAC, 50-60 Hz

26 V, 2.6 A

67.6 W

7800 mAh

2-2.5 hours

1.5-2 hours

250 µm filter

12-24 m/min (40-80 ft/min)

iOS, Android

Bluetooth

426 x 396 x 287 mm (16.8 x 15.6 x 11.3 in)

8.7 kg (19.18 lb)

SAT-3P6S-50

IP 68

0°-40°C (32°-104°F)

Use the device only in the below water conditions

Chlorine

Max 4 PPM

Temperature 5-35°C (41-95°F)

pH

7.0-7.8

NaCI

Max 5000 PPM

| Robotic Pool Cleaner User Guide

5

|

4 POOL CLEANER PARTS
Below is an illustration of the Niya Sonar 50 Robotic Pool Cleaner.

The parts included in the package delivered are illustrated here:

Niya Sonar 50

Filter Basket

Charger

Hook

6|

| Robotic Pool Cleaner User Guide

5 USE THE POOL CLEANER

5.1 Before You Start
Please make sure to charge the device before initial usage.
To achieve optimal cleaning performance, the water depth in the pool should be at least 0.4 m (1.3 ft).

5.2 LED Indicators
The below table outlines the LED indicators displayed on the device and their significance.

LED Color
Blue
Red Green Yellow White Purple

Solid Display Device Working Charging Fully Charged Device Reset

Flashing Display Flashing 1 sec: Device Starting Flashing 3 secs: Device Idle Low Battery
Device Malfunction Software Update Device stuck

5.3 Charge the Pool Cleaner
Connect the device to the electric socket using the battery charger provided. The charging process will begin and the LED indicator will show red.

When the device is fully charged the LED indicator will show solid green. After 10 minutes it will turn off automatically.

Disconnect the device from the electric socket.

| Robotic Pool Cleaner User Guide

7

|

5.4 Place the Pool Cleaner in the Pool

Before placing the device in the pool, press the left-side button to turn it on. A flashing blue LED indicator will display and there is a voice alert ­ “Welcome,I am ready to work”.

Place the device into the pool, making sure that the water covers the top of the device to enable correct usage. When cleaning commences the LED indicator will revert to solid blue.

5.5 Pool Cleaner Modes
The pool cleaner is set by default to Standard Mode. This means that it will clean all specified areas of the pool, including the floor, the walls and the waterline.
There are two other modes available, Floor Only and Wall Only modes. These modes can be selected in the mobile app or by pressing the switch button on the device.
When a mode is selected there is a voice alert confirming the mode selected.

Standard

MODE

Floor only

Wall only

Press the button to select the mode. Each subsequent press will change the mode.

8|

| Robotic Pool Cleaner User Guide

Refer to the below table for detail of the cleaning modes.

Mode Standard Wall Only Floor Only

Cleaning Coverage Floor, walls, waterline Cleans the walls only Cleans the floor only

Voice Alert Standard mode Wall only Floor only

Cleaning Cycle Time 2-2.5 hours 2-2.5 hours 2-2.5 hours

5.6 Remove the Pool Cleaner from the Pool
To remove the device from the pool use the hook provided by attaching it to a suitable pole (not included), such as a regular broom pole.

When extracting the device from the pool, take care not to knock it on the wall of the pool as this could cause damage to the device.
5.7 Switch Off the Pool Cleaner
To turn the robot OFF, press and hold the switch.

| Robotic Pool Cleaner User Guide

9

|

5.8 Clean the Pool Cleaner
Place the pool cleaner on a solid surface at the poolside. Make sure it is switched OFF. Press the switch to open the lid and remove the filter basket.
Open the cap of the basket and clean it before it dries out.

10 |

| Robotic Pool Cleaner User Guide

6 MOBILE BLUETOOTH APPLICATION INFORMATION
Please download the Niya App to your mobile device from either Google Play for Android or the Appstore for iOS or scan the appropriate QR code here.
The app is compatible with the following smart devices: ·Apple (iOS) – version 10 and up – iPhone, iPad, iPod ·Android – version 5 and up operating system

| Robotic Pool Cleaner User Guide

11

|

7 ROUTINE MAINTENANCE
7.1 Battery Replacement
Before inserting a new battery, clean up the water droplets and sand or other foreign objects from the device. Before replacement of the battery, leave the machine standing idle for two days to ensure the complete evaporation of moisture.
To replace the battery, proceed as follows:
1. Remove the six screws fixed to the holding plate and extract the used battery.

2. Insert the new battery in the same position where the used battery was previously.

NEW

3. Secure the new battery in place using the six screws. Make sure they are tightened correctly.

12 |

| Robotic Pool Cleaner User Guide

7.2 Storage
When the pool cleaner is not in use for an extended period, proceed as follows to store the device: 1. Make sure there is no water left in the pool cleaner. 2. Thoroughly clean the filter basket and insert it back in place. 3. Store the pool cleaner in a protected area away from direct
sunlight / rain / frost at a temperature between 0°-40°C / 32°-104°F. 4. Charge the pool cleaner once every 3 months to protect the battery.

| Robotic Pool Cleaner User Guide

13

|

8 FAQS AND TROUBLESHOOTING
Some common user questions are itemized here below. If these suggested solutions do not solve any problem you may have encountered, please refer to www.maytronics.com or contact Maytronics Customer Support.
Q: What kind of pool is suitable? A: It is recommended to use the cleaner for pools Up to 12 m (39.4 ft).
Q: Why doesn’t the cleaner respond after turning on the machine? A: The battery may be dead after long-time delivery or storage.
Charge the device, the LED indicator will be solid red while charging.
Q: Why can’t the cleaner climb the wall? A1: The device may be set to Floor- Only mode.
Connect it to the app and select the correct mode. A2: There is garbage or debris in the filter basket. Remove the basket and clean it.
Q: Why does the cleaner sit at the bottom of the pool and it doesn’t move or moves slowly?
A1: The device may be caught in the drain outlet on the pool floor. It will try to float itself to break free. If it is still stuck after several minutes, use the pole to move it.
A2: The device may absorb an extensive amount of debris in a very short time when placed in a dirty pool. Check and clean the filters if needed.
Q: Why does the front part float while the rear part stays on the floor? A: This is an intelligent feature of the pool cleaner, to break free from becoming stuck.
Q: Why can’t my phone connect to the cleaner? A: Please follow the below steps to link the app to the cleaner:
1. Keep your machine turned on. 2. Check and/or turn on the Bluetooth function on your phone. 3. Make sure your phone is in proximity to the cleaner (within 5 m or 16.4 ft.).

14 |

| Robotic Pool Cleaner User Guide

Q: Why can’t the cleaner clean the wall or waterline in Standard mode? A: The device may contain too much debris in the filter basket.
This could weaken its suction capacity.
Q: How many smartphones can be connected to one cleaner? A: Only one smartphone can be connected to the cleaner. You cannot connect
to the machine from other smartphones. Please reset the cleaner or delete it in the app if you want to link to another smartphone.
Q: Why does the cleaner automatically switch off after a few hours of charging? A: The device is designed to shut off automatically in 10 minutes after being fully
charged to protect the battery and ensure its lifespan.
Q: What is the issue when the cleaner lights up with a yellow or white LED indicator? A: The yellow LED indicator means the cleaner has a problem such as over-currenting
because it is stuck, or fails to start. Remove the cleaner from the pool and re-start it. The white LED indicator means that the cleaner is updating its firmware. Make sure that the cleaner battery is not too low.
Q: What is the issue when the cleaner lights up with a purple LED indicator? A: The purple LED indicator means that the cleaner is stuck. Pull the cleaner out of
the water. When the blue LED indicator starts to flash, place it back in the pool to continue the cleaning process.
Q: How can I obtain replacement accessories? A: Please contact your purchase channel.
Q: How can I buy a long pole and what size is it? A: A pick-up hook is available in the box, which is the universal pool accessory.
The hook fits a standard pole size with a 25-32 mm (1-11/4 ins) diameter connection end. You can easily find a pole in your local market or shop online.
Q: Why are there some water droplets inside a newly purchased machine? A: Every machine is rigorously tested before leaving the factory, including underwater
tests, etc. So, there may be a little water left inside. You can use it normally.

| Robotic Pool Cleaner User Guide

15

|

For support please scan

References

• Dolphin Robotic Swimming Pool Cleaner | Maytronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>