Wunderlich 38981 Swing Arm Number Plate Holder Centered Instruction Manual
- June 12, 2024
- Wunderlich
Table of Contents
Wunderlich 38981 Swing Arm Number Plate Holder Centered
Product Information
This product is a number plate carrier designed for motorcycles. It is
manufactured by Wunderlich, a company specializing in
motorcycle accessories. The number plate carrier is compatible with the model
specified in conjunction with the 29220-101 accessory. Product Usage
Instructions
- Start by referring to the “Anbauanleitung” or “Fitting Instruction” section of the user manual for step-by-step installation instructions.
- Ensure that you have all the required components mentioned in the manual, including the number plate carrier, shrink tube, cable, reflector, and specified screws.
- Follow the instructions to mount the number plate carrier onto your motorcycle’s swing arm. Use the provided M8x60 screws and tighten them to 28 Nm torque.
- If using the optional reflector, follow the additional instructions provided in section 2 of the user manual. Use the M8x60 screws and tighten them to 28 Nm torque.
- Refer to section 3 for any other relevant installation instructions or additional optional components.
Number plate carrier
Fitting Instruction
Fitting Instruction
Herewith, we explicitly point out that the parts included in the scope of
delivery may be used for mounting the license plate only. Further accessories
are not permitted to use.
WWW.WUNDERLICH.DE
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>