UGEARS Treasure Box Proposal Box Gifts Wooden Instruction Manual
- June 15, 2024
- UGEARS
Table of Contents
Model «Treasure Box»
Assembly instructions
Treasure Box Proposal Box Gifts Wooden
https://ugearsmodels.com/treasure-box.html
Remove model parts from the hanger board as illustrated below. Careful not to
break parts. If a part does not remove easily, carefully cut it out with a
knife. This model is intended for self-assembly without glue. If you have
difficulty installing the axles, ‘try waxing them with a regular candle. All
moving parts can also bbe waxed during assembly to reduce friction when
operating the model.
Warning!
Do not use a lighted candle!
Symbols.
Wax the part with a regular candle (rub with a candle).
Cut crosspieces before removing the part from the board.
Pay attention. Check for correct orientation or positioning.
Press the parts as far as they will go.
Do not fully press the outer parts (structural frame) together until checking
for fit and alignment of internal parts.
Perform the same steps in mirror image.
Spare parts.
This is not a structural component; it is a tool for measurement and
assembly.
| 
---|---
| 
| 
| 
| 
| 
| 
| 
| 
| 
|
|
Thanks for following along on this journey with us.
Customer support
customerservice@ugearsmodels.com
ugearsmodels.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>