ZEEVA XB Remote Control Dart Tank with Suction Darts Instruction Manual
- June 5, 2024
- Zeeva
Table of Contents
Size: 350(w) x 220(h) mm
Instruction Manual
Thank you for purchasing the
REMOTE CONTROL DART TANK.
This manual provides more information about this DART TANK,
please read the instructions before using.
AGES 10+
Product Overview
Package Contents
Remote Control Dart Tank x 1
Remote Control x 1
Suction Dart x 3
Instruction Manual x 1
Specifications
Remote Control Dart Tank Power Supply:
3 x “AA” 1.5V Batteries
(Alkaline type preferred, not included)
Remote Control Power Supply:
2 x “AAA” 1.5V batteries (not included)
Remote
Standard Control
Note: To avoid losing control, always pay attention when controlling the
Remote Control Dart Tank.
Press Forward Button to move forward the tank
Press Backward Button to move backward anti-clockwise the tank
Power On/Off
Slide the ON/OFF Switch to ON to turn on the RC Dart Tank.
Slide the ON/OFF Switch to OFF to turn off the RC Dart Tank .
How to shoot the suction dart
Recommend to use the back of the packaging for the target when shooting.
Warning : Never aim the suction dart at the eyes and any part of the
body.
Batteries Installation – Dart Tank
To install
batteries into the Remote Control Dart Tank, unscrew the screw on the battery
box cover to open the cover. Insert 3 x “AA” 1.5V batteries (Not Included)
into the battery box. Batteries should be placed as shown on the diagram. Put
back in place the battery box cover and tighten the screw.
Notice:
When placing the batteries, you must insert them according to the correct
polarity, the Remote Control Dart Tank won’t function if the batteries are
reversed.
Batteries Installation – Remote Control
To install batteries
into the Remote Control, unscrew the screw on the battery box cover to open
the battery compartment. Insert 2 x “AAA” 1.5V batteries (Not Included) into
the battery box. Batteries should be placed as shown on the diagram.
Put back in place the battery box cover and tighten the screw.
Notice:
When placing the batteries, you must insert them according to the correct
polarity, the Remote Control won’t function if the batteries are reversed.
Performance Tips
- Do not drive the RC Dart Tank on grass, or sand, or go through water.
- Do not drive the RC Dart Tank in windy or rainy weather.
- Do not drive the RC Dart Tank into any sharp object.
- Keep fingers, hair, and loose clothing away from RC Dart Tank wheels.
- Never aim the suction dart to the eyes and any part of the body.
Care and Maintenance
Always use a dry and soft cloth to clean this product.
Avoid this product from being exposed to sunlight or heat.
Avoid immersing these toys in water, otherwise, the electronic parts may be
damaged.
Check the product regularly. If any damages are discovered, please stop using
it immediately, until it is completely repaired and in good working condition.
IMPORTANT: BATTERY INFORMATION
WARNING: TO AVOID BATTERY LEAKAGE:
- The batteries used with this product are small parts and should be kept away from small children who still put things in their mouths. If they are swallowed, promptly see a doctor and have the doctor phone the American Association of Poison Control Centers (1-800-222-1222).
- Always purchase the correct size and grade of battery most suitable for the intended use.
- Do not mix old and new batteries, alkaline, standard (Carbon – Zinc), or rechargeable (Nickel-cadmium) batteries.
- Clean the battery contacts and those of the device prior to battery installation.
- Ensure the batteries are installed correctly with the regard to polarity (+ and -).
- Always remove batteries if consumed or if a product is to be left unused for a long time.
Warning
This product is suitable to be used by people who have operating experience in
a remote toy or aged no less than 10 years old.
Please do not put the product in your mouth to prevent choking hazards of
small parts.
Except for the screw on the battery cover. Never try to open the product by
unscrewing the other screws of the product. Nothing inside for service.
Please do not put your finger into available interspaces.
Please do not play the product in a brutal way such as throwing, crashing, or
twisting it.
Please store the smaller-sized product accessories in places that are out of
reach of children, in order to avoid the occurrence of accidents.
Avoid placing the batteries in places at high temperatures and avoid exposure
to heat.
When young children are operating the product, it shall be ensured that the
adults are guiding and making sure the product control is within the viewing
range of the controller (or instructor) so that it makes the control of the
toy more convenient.
When the product is not in use, please switch off the power supplies of the
toy, and remove the batteries from the product.
Please note that we won’t take any responsibility for any wrong operation as
this may result in severe injury or loss of property, and we cannot control
the operating process during the time when the user assembles or uses this
product.
Once this product is sold, we won’t be responsible for any safety
responsibility during the time the user operates or uses or controls of this
product.
FCC Statement
This device complies with the part 15 of the FCC rules. Operation is subject
to the following two conditions:(1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
instructions may cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on. The user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or experienced radio/ TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Keep All Relevant Information for Future Reference
Distributed by 1616 Holdings, Inc.
701 Market Street, Suite 200
Philadelphia, PA 19106
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>