WOODBRIDGE BTS1611 71-Inch Whirlpool Water Jetted and Air Bubble Freestanding Bathtub User Guide

WOODBRIDGE BTS1611 71-Inch Whirlpool Water Jetted and Air Bubble Freestanding Bathtub User Guide

Certified to the following Codes & Standard:

• U.S Safety Standard: UL 1795 – Hydro massage Bathtubs (UL)
• ASME A112.19.7 / CSA B45.10-2012(R17) – Hydromassage Bathtub Systems
• CSA B45.5/IAPMO Z124-2017 – Plastic Plumbing Fixtures
• 2009 and 2006 International Plumbing Code® (IPC)
• 2021, and 2006 International Residential Code® (IRC)
• 2018, 2015, and 2006 Uniform Plumbing Code® (UPC)

READ ALL INSTRUCTIONS BEFORE UNPACKING THE PRODUCT

INSTRUCTIONS THAT, IF IGNORED COULD RESULT IN DEATH OR SERIOUS INJURY CAUSED BY INCORRECT HANDLING OR INSTALLATION OF THE PRODUCT. THESE INSTRUCTIONS MUST BE OBSERVED FOR SAFE INSTALLATION.

CAUTION : Two Person Lift Required

2 PEOPLE ARE REQUIRED TO LIFT AND DURING ENTIRE INSTALLATION OF THIS PRODUCT

This products must be installed by a fully insured and licensed plumber only. Installation of any our product by anyone other than fully insured and licensed plumber shall void limited warranty. We recommends that such licensed plumber has experience in the installation of products.

Limited warranty is void on any commercial installation

We are not responsible for local code compliance for this product. Building and plumbing codes may vary from state-to-state in accordance to your location. We are not responsible for providing any compliance certifications.
Under no circumstances we shall not be liable for any incidental damages sustained in connection with this product
Neither manufacture, nor distributor, nor retailer is responsible for water damage or flood caused due to use of this product.
Under no circumstances We shall not be liable for any and all fees, cost of installation/re-installation/removal, subsequent damage or transportation in case of the product defect

BEFORE YOU BEGIN

• Please read these instructions carefully to familiarize yourself with the required
  tools, materials, and installation sequences. Follow the sections that pertain to your particular installation. This will help you avoid costly mistakes. In addition to proper installation, read all operating and safety instructions.

• All information is based on the latest product information available at the time of publication. WOODBRIDGE® reserves the right to make changes in product characteristics, packaging, or availability at any time without notice.

PRODUCT REQUIREMENTS

Summary Of Key Requirements

Observe all local plumbing codes, Install the unit to a level subfloor,Provide properly -dimensioned framing.

Product Inspection

Uncrate and inspect bath for damage. Leave all materials in the crate during construction to prevent damage.

ROUGHING-IN

IMPORTANT

• Measurements are ± 1/2″ and subject to change without notice
• Specifications & Configurations are subject to change without notice
• Please measure tub on-site before installation

INFORMATION

• Please note that installer(s) must be certified or warranty will be voided.

• Measurements herein supersede all others published prior to purblication
  date shown below

• Before ordering or installing, please consider future access to equipment

INSTALLATION REQUIREMENTS

Tools Required

• Adjustable pipe
• wrench
• Ruler
• Level
• Safety shoes
• Safety glasses
• Square
• Screwdriver
• Pliers
• Utility knife

Materials Required:

• Plumbers putty
• Wall coverings, as necessary
• Silicone sealant
• Gypsum cement (optional)
• Construction adhesive
• (optional)
• Protective covering for
• bathtub
• Nails

Clearance Requirements:

Check the rough-in and room dimensions to provide adequate space for the bath unit.

SITE REQUIREMENTS

Plumbing Preparation

• Position the plumbing according to rough-in dimensions.
• Cap the supplies and check for leaks.

BEFORE INSTALLING UNIT

CAUTION: Ensure a watertight seal on the bath drain connections.

1. Install the faucet valving and shower head tee.When drilling bathtub for faucet,
   ensure sufficient clearance. Open the hot and cold water valves and check the supply connections for leaks.

2. Run water into the bath and check the drain connections for leaks.

3. Fill the bathtub up to the overflow level and check overflow unit for leaks.

INSTALL BATHTUB

This products must be installed by a fully insured and licensed plumber only.

1. Your new bathtub has been manufactured to the highest possible standards,it has been tested and approved by factory

2. When removing bathtub from protective carton. DO NOT LIFT BATHTUB BY PIPE WORK. Inspect for any possible damage that may have occurred in transit.
   IMPORTANT: Bathtub must be installed level on all top edges.

3. Set the bathtub on two 4×4 pieces of lumber .so you can access from the bottom of the bathtub.

4. Connect Power Supply:
   Connect power supply to control unit. The electrical connections must comply with local authority regulations and must be done by an authorized electrician.

5. Fill bathtub with water to approximately 40 mm(1.6˝) above the jets and trial run pump for 10-15 minutes. Check all the fittings for leaks and test the control functions. Switch off the spa pump and leave the unit filled with water (pump is not running) for at least another two minutes. Check the pump and pipes union connections for leaks. Hand tighten union connections if required.
   IMPORTANT: Your bathtub has been factory tested and approved. It is the responsibility of the installer to test run the bathtub, check all the fittings for leaks and test the control functions.
   NON OBSERVANCE WILL INVALIDATE FACTORY WARRANTY.

6. The unit must be connected only to a supply circuit that is protected by a Ground-Fault Circuit Interrupter (GFCI). Such a GFCI should be provided by the installer and should be tested on a routine basis.

ELECTRICAL REQUIREMENTS

Air Massage

120V 15AMP Dedicated GFCI Breaker

In the example above, there are 1 Dedicated 15AMP 110V GFCI Breakers.

One (1) Dedicated GFCI Breaker for the Air Massage Blower

Each Accessory Requires a Dedicated 120V 15AMP GFCI Breaker.

THESE CANNOT BE SHARED

(LED LIGH

TS & OZONE CAN SHARE A BREAKER)

AIR MASSAGE, WHIRLPOOL PUMP

For Air Bath and Whirpool Tub installation, Do not apply any silicone sealant after installation, leave a 5-10mm(0.2″ to 0.4″)gap for motor/pump ventilation purpose.

In the example above, there are 2 Dedicated 15AMP 110V GFCI Breakers.

1. One (1) Dedicated GFCI Breaker for the Whirlpool Pump
2. One (1) Dedicated GFCI Breaker for the Air Massage Blower

Each Accessory Requires a Dedicated 120V 15AMP GFCI Breaker.

THESE CANNOT BE SHARED

(LED LIGHTS & OZONE CAN SHARE A BREAKER)

INSTALLER INFORMATION

DATE OF INSTALL: ___
INSTALLER’S NAME: __
PLUMBER: __
CONTRACTOR: _
LICENSE #: _____

WARRANTY

Woodbridge warrants its products as listed in below to be free of material and workmanship defect, subjected to the limitations set forth in this limited warranty.

• Bathtub, Whirlpool/Air Bubble Massage Tub: 1 Year limited to be free of defects in material and workmanship
• Toilet and Bidet: 1 Year limited to be free of defects in material and workmanship
• Faucet: 1 Year limited to be free of defects in material and workmanship
• Vanity: 1 Year limited to be free of defects in material and workmanship
• Granite, Marble, Engineered Quartz Vanity Top: 1 Year limited to be free of defects in material and workmanship
• Medicine Cabinet, LED Mirror: 1 Year limited to be free of defects in material and workmanship
• Stainless Steel Sink: 1 Year limited to be free of defects in material and workmanship
• Solid Surface Shower Wall Panel, Shower Base and Vanity Top: 10 Years limited warranty to be free from material defects
• Shower Door: Lifetime warranty on glass components and 1Year limited on other hardware

This limited warranty is non-transferable and only applies to products purchased and installed in the United States.

This limited warranty excludes all industrial, commercial and business usage. Proof of purchase (original sales receipt) from the original purchaser, Description and pictures of defect, model number or model description must be provided to Woodbridge Bath for all warranty claims and Woodbridge Bath IS NOT responsible for labor cost, removal or installation costs.

This limited warranty shall not apply to goods which have been subject to accident, negligence, improper installation, product abuse, product misuse, or use of cleaners containing abrasives, alcohol or other organic solvents, whether performed by a contractor, service company, or yourself, are excluded from this warranty.

This warranty does not cover surface damaged caused by use of chemicals that break through or dissolve the surface finish or damage caused by the accidental dropping of sharp or heavy objects. Improper care and use of abrasive cleaners and will void the warranty.

During this limited warranty period if a malfunction occurs and after inspection it is determined that a defect developed during normal use, Woodbridge will as at its election proceed withon any of the following options:

1. repair or replace the defective part(s) or product(s) at cost
2. issue a refund of the original purchase price of the product(s) (Valid within 30 days from the date of purchase)
3. issue a credit to be applied toward the purchase of a new product. Shipping/delivery charges may apply and are in sole discretion.

Caution:

NEVER use cleaners containing abrasive cleaners, ammonia, bleach, acids, waxes, alcohol, solvents or other products that are not recommend for Chrome finish will void the warranty.

Woodbridge products should be installed by a fully insured and licensed contractor only. Installation by anyone other than fully insured and licensed contractor will void this limited warranty.

RESPONSIBILITIES OF OTHERS

Inspecting the unit prior to installation is the responsibility of the installer or building contractor who acts on behalf of the user. They are responsible for  ensuring the unit is free of defect or damage. Notices are placed on the unit and on the shipping carton advising the installer of this responsibility. In the event of a problem, the unit must not be installed. Woodbridge is not responsible for failures or damage that could have been discovered, repaired, oravoided by proper inspection and testing prior to installation.

Damage occurring in transit is the responsibility of the carrier. The user or installer MUST open the crate and inspect the unit for damage when it is delivered. If damage is discovered, it must be reported immediately to the seller and the carrier in writing, and an inspection requested. Failure of the carrier to respond should be reported to the seller and the carrier. Your freight claims should be filed promptly there after.

This limited warranty does not cover any liability for consequential or incidental damages, all of which are hereby expressly disclaimed, or the extension beyond the duration of this limited warranty of any implied limited warranties, including those of merchant ability or fitness for an intended purpose.

DISCLAIMER

Except as expressly provided, there shall be no warranty or obligation, express or implied, oral or statutory. No dealer or other person has the authority to make any warranties or representations concerning or its products. In no event shall be held responsible for any such warranties or representations.

Some states/provinces do not allow limitations on how long an implied warranty lasts, or the exclusion on limitation of special, incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights, you may also have other rights which vary from state/province to state/province.

To obtain warranty and replacement parts, please send e-mail to help@woodbridgebath.com with the original receipt information, Woodbridge will determine whether to repair or replace your product, issue a refund or issue a credit.

IMPORTANT SAFETY RULES

ATTENTION! ALWAYS FOLLOW THESE PRECAUTIONS WHEN USING A BATHTUB

Warning

• The bathtub must be installed and used as described in this manual
• Use caution when entering or exiting the bathtub
• Do not permit children or persons with infirmities to use the bathtub without supervision of an adult
• People using any medications or having adverse medical history must consult a physician prior to use of the bathtub to avoid potential hyperthermia and possible drowning
• Water temperature over 100ºF may cause hyperthermia and/or other health problems. Check water temperature and adjust it for your personal comfort
• Never use bathtub while intoxicated, after taking meals or any alcoholic beverages. Consuming alcoholic beverages Never use bathtub while intoxicated, after taking meals or any alcoholic beverages. Consuming alcoholic beverages drowning.
• If you are pregnant or you feel that you are may be pregnant, consult your doctor before using the bathtub
• Never use any electrical devices such as hair dryer, lamp, telephone, tv, radio, or others within 5 feet of the bathtub
• Do not overfill the bathtub before enetering. Entering the bathtub when filled will cause overflow and slippery conditions. Use extreme caution when entering and exiting

Care and Cleaning

• Most dirt will wash off with mild soap and warm water.
• For tough spots, use liquid dish washing soap or non-chlorine bleach.
• Do not use abrasive material such steel wool or scouring pads to clean the acrylic surface.
• Always test the cleaning solution on a small area before using it on the entire surface.
• Do not allow cleaning to soak on the acrylic surface.
• Rinse thoroughly with water immediately and wipe dry with sođ cloth.

Repair and Maintenance

• Use liquid polish compound such as Gel-Gloss Kitchen and Bath Polish(TM) to keep the original shine of acrylic surface.
• Light scratches can be removed with polishing compound for automobiles.
• For deeper scratches use wet sandpaper (1500 grit or higher). Always add water when sanding and lightly sand the area larger than the scratch in a circular motion to remove the scratches. Repeat until the scratch is removed. Use soft cloth and small amount of polishing compound to restore shine. Repeat as needed until surface shine is restored.

IMPORTANT!

DO NOT USE: Abrasive cleaners such as: acid, ammonia, bleach, and simmilar solutions. Use of such solutions may cause corrosion, finish peeling, and/or dull the surface.

DO NOT USE: Abrasive sponges or cloth. Never use steel, wool, or wired brushes that will permanently scratch the surface

Retain these installation instructions for future reference!

Thank you for using WoodBridge products!

Support

Please don’t hesitate to contact us if you have any questions or concerns.

Customer Service Phone: 562-229-0088. (Monday – Friday 9 AM – 5 PM Pacific Time)
Or Email: help@woodbridgebath.com
Web: http://www.woodbridgebath.com/

References

• ᐅ【One Piece Toilets | Freestanding Bathtubs | Shower Bases | WOODBRIDGE】

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>