Tribit BTS 31 Portable Wireless Speaker User Manual

Tribit BTS 31 Portable Wireless Speaker

Packing List

Product Illustration

Charging

• To Charge the Speaker
  • Connect this speaker to a 5V power outlet via the providing USB-C charging cable.
• To Charge Other Devices
  • Connect the speaker with your USB-enabled device via a USB-A charging cable(not included).

Charging Indicator

Battery Indication

Button Controls

Power on/off

Bluetooth Connection

• The StormBox Pro Speaker will automatically connect to the last 2 paired devices again if available. If it fails, the speaker will enter to pairing mode.
• You can connect this speaker with multiple devices and control the connection via
•  The speaker can remember up to 8 paired Bluetooth devices.
• Better still, it can connect to 2 devices simultaneously at a time.

Conversion between 2 Connected Devices

• Pause the playback of the current device
• Play the audio file of the other device

Volume Adjustment

Multifunctional Button (MFB)

XBass Function

• Short press the XBass button to activate the XBass function, then the XBass indicator will glow white.
• Short press this button again to turn off the XBass function, and the XBass indicator will light off.

Party Mode

• Make sure both of two speakers are turned on.
• Press and hold the button of one speaker for 2s to enter pairing status, then press and hold the button of the other speaker for 5s to search for Bluetooth devices. At this time, you ll hear a “Party mode” sound and the speakers enter party mode.

Note: The function of party mode can be realized only when you have 2 Tribit StormBox Pro speakers.

Stereo Mode

• Make sure both two speakers have entered party mode.
• Short press the button on any of the two speakers.
• When you hear the voice of “Stereo Mode” ,one speaker sounds “Left Charnnel”
  and the other sounds “Right Channel” , the stereo mode is activated. Note: The function of stere0 mode can be realized only when you have 2 TribitStormBox Pro speakers.

Conversion between Party Mode and Stereo Mode
Short press the button on any of the two speakers.

Disable the Party Mode or Stereo Mode
Press and hold the * button for 5s on any of the two speakers, then both will re-enter Bluetooth pairing mode.

Factory Reset
Press and hold the Volume-and +button for 5s simultaneously to clear the pairing list and all settings, and the speaker will restore factory state.

Specification

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, it not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver iS is connected.
• Consult the dealer or an experienced radio/IV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

• this device may not cause harmful interference, and
•  this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>