PROJECT SOURCE 4767241 1-Gallon Filler Multi-surface Repair Kit User Manual
- June 9, 2024
- PROJECT SOURCE
Table of Contents
PROJECT SOURCE 4767241 1-Gallon Filler Multi-surface Repair Kit
PROJECT SOURCE and logo design are trademarks or registered trademarks of
LF, LLC. All rights Reserved.
Thank you for purchasing this Project Source product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 866-389-8827, 8 a.m. – 8 p.m., EST, Monday – Sunday. You can also contact us at partsplus@lowes.com.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Time: 2 Hours
TOOLS REQUIRED
FEELING CONFIDENT? START YOUR NEXT PROJECT
- Visit www.lowes.com for more information
PRODUCT DESCRIPTION
Popular with multi-talented composite repair pros for filling and glazing chips, cracks, deep gouges, fillets, holes and voids on FRP composite surfaces including, bath ware, boats, marine, automotive, power sports, RV and industrial applications. Excellent for pre-refinish repairs on dry surfaces or where water drains and is not wet 24/7. Use alone or color coat for better cosmetic match
- Hardness characteristics close to Acrylic and Gel coat.
- Excellent putty to work, sand and glaze (Carvable).
- Epoxy fast-Quick cure 1-3 minutes.
- Putty closely matches most bath ware white, requiring less coating to cover filled areas.
- Minimal pinhole fairing compound.
- Excellent adhesion.
- Minimal shrinkage fill.
- Avoid Auto body, Automotive, bondo fillers when repairing composites associated with water and moisture environments.
Repairs
- Acrylic
- Cultured Marble
- Metal
- Formica
- Concrete
- Porcelain Enamel
- Gelcoat
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
- Obtain special instructions before use.
- Do not handle until all safety precautions have been read and understood.
- Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
- Keep container tightly closed.
- Ground/bond container and receiving equipment.
- Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools.
- Take precautionary measures against static discharge.
- Do not breathe dust/fume/gas/mist/vapors/spray.
- Avoid breathing dust/fume/gas/mist/vapors/spray.
- Wash thoroughly after handling.
- Do not eat, drink or smoke when using this product.
- Use only outdoors or in a well-ventilated area.
- Avoid release to the environment.
- Wear protective gloves/protective clothing/eye protection/face protection.