KLH

KLH MODEL3MBPR Suspension Bookshelf Speaker

Specifications

• FREQUENCY RESPONSE: 46Hz – 20,000Hz +/- 3dB
• LOW FREQUENCY EXTENSION: -10dB @ 35Hz
• IN-ROOM SENSITIVITY: 88dB @2.83V / 1M
• FREE-FIELD SENSITIVITY: 85dB @ 2.83V / 1M
• POWER HANDLING: 150 Watts / 600 Watts Peak
• RECOMMENDED POWER AMPLIFICATION: 30 Watts to 150 Watts Per Channel
• IN-ROOM MAXIMUM SPL: 108dB
• IMPEDANCE: 6 ohms (3.7 ohm minimum @320 Hz)
• HORIZONTAL DISPERSION: 140° degrees
• FEATURES : Three-Position Acoustic Balance Control
• CROSSOVER FREQUENCY: 1,500Hz (2nd order electro-acoustic)
• HIGH-FREQUENCY DRIVER: 1″ Aluminum Dome with soft rubber suspension
• LOW-FREQUENCY DRIVER: 8″ Pulp-Paper Cone with reverse roll suspension Non-resonant die-cast aluminum frame
• INPUTS : Five-Way Gold-Plated Binding Posts
• HEIGHT: 25″ (71.8cm) w/ included riser 19.0″ (48.2cm) w/o riser base
• WIDTH: 25″ (31.1cm)
• DEPTH: 5″ (29.2cm) w/ included riser 10.5″ (26.7cm)
• WEIGHT : 29lbs. (13.2kg) w/o riser base 36Ibs. (16.4kg) w/included riser base

INTRODUCTION

KLH audio systems are designed and produced with high-quality audio technology for audiophiles of any budget out of a passion for high-fidelity sound. KLH is a significant player in the speaker market, known for its cutting-edge technology and distinctive capacity for innovation. KLH offers stereo speakers and home theatre systems with unrivalled sound quality and subdued, understated luxury designs to fit the requirements of almost any audiophile.

Thank you so much for choosing the KLH Model Three loudspeaker. KLH’s Model Three is an innovative, compact system that rivals the largest loudspeakers. The mid-century modern speaker reflects the iconic styling and musical integrity unique to the KLH brand while providing a solution for music enthusiasts with smaller listening spaces. Built on the acoustic suspension design principle, advanced technology, the finest materials, and sophisticated quality control, the Model Three guarantees to provide you with unparalleled listening pleasure for many years to come.

To achieve the level of music reproduction Model Three’s are capable of requires care in both installation and operation.

If you are new to the audiophile world, please take the time to read this manual and follow the instructions. You will be happy you did! If you have any further questions after doing so, contact your authorized KLH® dealer OR call our toll-free number at 1-833-554-8326. A customer service representative will get back to you in 24 hours or less!

THE HISTORY OF KLH & THE MODEL THREE

KLH Audio was established in 1957 by Henry Kloss, Malcolm Low, and Josef Hofmann. Henry Kloss first made his name in Acoustic Research with the AR-1 and its patented acoustic suspension system that revolutionized the high- fidelity industry. Kloss later left Acoustic Research to start KLH, where he immediately began marketing his acoustic suspension loudspeaker designs.

Throughout the 1960s and 1970s, KLH was the top seller for acoustic suspension loudspeakers. Several models were very successful during that time and continue to be held in high regard for their tonal accuracy and precision today. The KLH Model

Three is an all-new acoustic suspension loudspeaker model, first introduced in 2022. This loudspeaker will carry on the legacy of accurate audiophile-quality performance while delivering great value to the customer.

ACOUSTIC SUSPENSION DESIGN

First introduced in 1954, the acoustic suspension principle has long been considered the most accurate of all loudspeaker designs. The original AR-1, the well-known AR-3, and various later models were all brought to market by Edgar Villchur and Henry Kloss. Several brands, including KLH, would adopt the acoustic suspension principle and use it in their loudspeakers designs for many years to come. This design principle dominated the speaker market well into the 1970s.

In an acoustic suspension design, the air volume inside the enclosure serves as a cushion of air, or air spring, to provide a restoring force for the woofer cone. The said air inside the enclosure becomes the dominant part of the woofer’s suspension. Because the air volume inside the enclosure is more linear than the mechanical parts of the woofer’s suspension, the woofer’s diaphragm can move more linearly. This linear movement enables the driver to operate at higher excursions with less distortion than traditional bass-reflex systems. Acoustic suspension systems receive worldwide praise for their greater accuracy, tighter bass transients, and exceptional bass resolution and texture.

TWO-WAY DESIGN

The KLH Model Three is a compact, 2-way system that provides full-range sound to average-sized listening spaces. KLH designed an 8” woofer specifically for this 2-way system, and it features a smooth and extremely accurate response up to 1,600 Hz. This woofer delivers clear vocals and offers rich reproduction of lower midrange instruments- all while minimizing distortion. Meanwhile, the 1” tweeter provides a smooth extended response with low distortion. The dispersion characteristics are polished and natural, which is crucial for a large and accurate stereo image.

WHAT IS IN THE CARTON?

The carton contains one Model Three speaker, one grille, one slant riser base, and one user’s manual for your convenience.

SUSTAINABLE MATERIALS

The Model Three does not utilize much plastic material in its construction or packaging. Where possible, KLH has elected to use more responsible materials, resulting in a product more in line with modern environmental sensitivities.

UNPACKING THE MODEL THREE

All components of the Model Three system are packaged carefully for maximum protection against damage. As with any high-quality audio product, it is advisable to keep the original packing materials. These materials will be beneficial to you if you ever need to transport the speakers.

The Model Three loudspeaker and the riser base are individually boxed, then packed together in an over-carton. The first step is to remove the two inner boxes from the carton. Next, remove the loudspeaker and its base from their separate packaging. Because of the bulk and weight of the loudspeaker, it is best if two people unpack the contents.

PLACING THE MODEL THREE ON SLANT RISER

SPEAKER CONNECTION

IMPORTANT! Turn your amplifier or receiver OFF before connecting your speakers. This action will avoid damage that could result from accidental shorting of the speaker cables.

You can use bare wire or banana, pin, or spade connectors with your loudspeaker binding posts.

Tighten the posts firmly by hand but do not over tighten!

Correct polarity (or phase) is critical for proper imaging and bass performance. Connect one speaker at a time to ensure proper connection.

The red (+) amplifier terminal connects to the red (+) speaker terminal. The same applies to the black (–) terminals. Make sure all wires are firmly fastened. Repeat this connection procedure for each speaker. Once connected, it is a good idea to go back and double-check each connection for correct polarity.

BREAK-IN

Your KLH Model Three loudspeakers will sound great right out of the box. But since your new speakers include many moving parts, these parts need time to adjust to one another. Therefore, some amount of “break-in” is necessary for your speakers to sound their best. KLH recommends playing your speakers at a moderate volume for at least 8 hours before any critical listening.

MODEL THREE POSITIONING AND ROOM ACOUSTICS

Room acoustics play a huge role in the sound reproduction characteristics of your Model Three loudspeakers. Experimenting with loudspeaker placement is a necessary step for optimum acoustic performance. Fortunately, the Model Three is very placement-friendly, and there are only a couple of factors that you need to keep in mind:

1. Low frequencies (below 400Hz) are heavily influenced by the loudspeaker’s position relative to the boundaries of the listening room.
2. Mid & High frequencies (above 400Hz) are mostly influenced by the reflectivity (“live” or “dead” quality) of the listening room boundaries and the type of furnishings.

Hard surfaces, such as bare walls or wood floors, will reflect sound, whereas carpet and upholstered furniture absorb it. Too dead, and the listening space will sound dull and lifeless. But a highly reflective room will result in room reflections and echoes, which result in the room being too bright.

Overly bright listening rooms are particularly problematic!

The primary goal is for the sound to predominate from the loudspeaker pair- with a lesser amount of sound contributed by the room itself. An ideal listening space is neutral, meaning a room that contains characteristics of both a “live” and “dead” environment. One absorbent boundary (usually a carpeted floor) is enough to make the listening space not “too bright.” Therefore, an example of a good, basic listening room is a room characterized by walls, carpet (with pad), and plush furniture. If the room has wood or tile floors, it is recommended you utilize a large area rug.

Even rooms with a neutral acoustic behavior can still exhibit differences in the perceived acoustics simply due to the listening room dimensions and the precise location of the loudspeakers within the space. That is especially true concerning the boundary condition immediate to the loudspeaker’s position. The less distance to a back wall or proximity to the corner of the listening room will enhance the low & middle bass characteristics. Keep that in mind during the listening evaluation and positioning of the loudspeaker. The KLH Model Three loudspeaker is tuned for 6 to 24 inches off the back wall and at least 24 inches from the corner of the listening room. For an otherwise neutral listening room, this is considered the best starting position when first setting up the Model Three’s. (See illustration above.)

NOTE: KLH provides the user with the ability to control the loudspeaker’s tonal balance to compliment the room acoustics for a listening space that may not be ideal.

CAUTION

• Do not place the speakers in direct sunlight or where they will be exposed to intense light.
• Avoid placing the speakers near power amplifiers, heat registers or other objects that generate large amounts of heat.
• Do not place speakers in humid or dusty spaces.

THREE-POSITION ACOUSTIC BALANCE SWITCH

The selector switch located on the back of each loudspeaker allows users to tailor the output above 400Hz.

“HI” Position – This is the default position or 0dB. It is the preferred selection for neutral to dead listening spaces.

“MID” Position – This adjusts the loudspeaker -1.5dB above 400Hz. Use this setting for slightly live listening spaces.

“LO” Position – This adjusts the loudspeaker -3.0dB above 400Hz. Use this setting for very live listening spaces (for example, a room with a tile floor).

Of course, the selection is up to the user, and the user may want to experiment to determine the best selection for their listening taste. Please remember to set both speakers to the same setting; otherwise, a poor center image will result.

HOW TO EVALUATE STEREO LOUDSPEAKERS FOR SOUND AND ACCURACY

It is time to listen to the loudspeakers and evaluate their performance. Since the listening room contributes half of what you hear, proper evaluation and positioning adjustments are required to ensure the most rewarding listening experience. A little work here will go a long way. You want to start with a variety of music composed of tunes with which you are most familiar. Acoustic instruments and strong vocals are preferred since they are natural to the listener.

With the loudspeakers positioned and connected to a source, the first step is to confirm the loudspeakers are connected in phase. Pick a tune with a heavy vocal track. At a listening position centered between both speakers, listen specifically to the music vocals, and confirm they are centered directly between the two loudspeakers. The center image should be strong enough, and there should be no doubt about the location of the image. You should feel as if you can reach out and touch the vocalist. If the center image is vague or not there at all, recheck all connections. This step is easy, but you would be surprised how often it goes overlooked!

The next step is to evaluate the loudspeakers for musical accuracy, with particular attention given to low-frequency performance. This region (below 400Hz) is most influenced by the speaker’s position in relation to the boundaries of the listening room. Slight changes can have a dramatic effect on the low-frequency output and overall balance of the system. You will want to experiment with moving the loudspeakers relative to the side and back walls of the listening room to achieve the best balance – keeping in mind that placing the loudspeaker closer to a wall or corner will enhance bass. You want to avoid speaker locations that result in weak or thin bass. Likewise, you want to avoid positions that make the loudspeakers sound boomy. Use several music tracks and try to find a happy medium. The KLH Model Three features a 3-position balance control that you will want to experiment with at this point. If you are experiencing particularly weak bass, switching this control to the -1.5dB or -3.0dB setting will make acoustic changes to the loudspeaker that will help you achieve the correct overall balance more quickly.

Once you are happy with the musical balance of the system, you will want to experiment with the toe-in to achieve the best imaging and soundstage. Accurate imaging and soundstage are the qualities that create the three- dimensional space around a pair of loudspeakers. When done correctly, this can enhance your musical enjoyment. More toe-in will increase image depth and localization; less toe-in will increase image width. You want the center image to be strong, but not at the expense of a wide soundstage. To do so, start with the loudspeakers pointed directly at the listener (strongest center- image). Then, slowly splay the speakers outward until you achieve the best combination of center image and soundstage. Again, you want to use a variety of music.

It is best to keep in mind that not all music will behave in the same manner. You will find some variation from artist to artist, but you should be able to find the best compromise for the types of music you enjoy.

That is it! Little preparation and time to experiment results in an enjoyable and rewarding listening experience!

NOTE: The Model Three loudspeaker exhibits a broad horizontal sound dispersion pattern. The sonic signature remains the same over a +/- 20° angle off the horizontal axis of the loudspeakers. As a result, the loudspeakers can be toed in-or-out about 20 degrees without any meaningful change in the direct sound from the loudspeaker arriving at the listening position. However, as the loudspeaker toe-in is adjusted, it does affect the sound energy reflected off the sidewall of the listening room, which directly affects the soundstage and ambiance.

CLEANING

Your Model Three speakers feature a genuine wood veneer. The finish is a low- gloss clear lacquer that only requires an occasional soft damp cloth. Be sure to clean with the grain, avoiding a circular or cross-grain motion. Do not use an abrasive cleaner. Avoid getting any part of the speaker components wet. Do not place wet objects (drinking glasses, potted plants, etc.) on top of your speakers—if allowed to soak in, even the smallest amount of water may permanently damage the loudspeaker finish.

WARRANTY

Our 10-year warranty begins from the purchase date of the item (Receipt Date). Warranty registration must be completed at   KLHAUDIO.com/warranty. Registration of the product must be completed within 120 days of purchase for warranty validation. Original receipt of purchase must be retained for proof of purchase. For warranty or service issues, please contact your authorized KLH dealer. The warranty covers any production and/or material defects of the product. This warranty is non-transferable.

The following is NOT COVERED by the warranty:

1. Accidents, misuse, poor maintenance, electrical overloads such as lightning or voltage.
2. Incorrect use of the product.
3. Altered serial number.
4. Transportation costs for the service call.
5. Purchase of KLH products from an unauthorized reseller.

The replacement item cannot exceed the cost of the item under warranty. The supplier is responsible for only repair or replacement. KLH toll-free number is 1-833-554-8326

EU COMPLIANCE INFORMATION

Eligible to bear the CE mark, Conforms to European Union EMC

Directive 2004/108/EC; European Union Restriction of Hazardous Substances Recast (RoHS2) Directive 2011/65/EC; European Union WEEE Directive 2002/96/EC.

KLH and the KLH logo are registered trademarks of Kelley Global Brands Inc., registered in the U.S. and other countries.

WEEE NOTICE

Note: This mark applies only to countries within the European Union (EU) and Norway.

This appliance is labeled in accordance with European Directive 2002/96/EC concerning waste electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling.

FREQUENTLY ASKED QUESTIONS

Is KLH a good speaker brand?

Yes, the speakers are well designed and of high quality.

What are bookshelf speakers best for?

Bookshelf speakers should not be placed on the ground; instead, they should be placed on a shelf, table, or other elevated surface. They are made with the intention of enhancing sound in tiny to medium-sized settings.

Are bookshelf speakers worth it?

They do not produce as much bass and do not occupy as much visual or physical space as larger tower speakers. However, a good set of bookshelf speakers will offer a satisfyingly full sound for the majority of listeners and musical genres. (And you can frequently add a subwoofer if you truly want extra bass.)

What is considered a bookshelf speaker?

A bookshelf loudspeaker (or bookshelf speaker) is a small loudspeaker that is designed to be mounted on a raised surface, like a bookshelf, and is typically sold for consumer-grade home audio applications as part of a shelf stereo pair or home theatre package.

Are bookshelf speakers better than a soundbar?

Due to their larger speaker drivers and physical speaker cabinets, bookshelf speakers typically deliver superior sound quality than Soundbars. Premium sound quality is offered by some soundbars, particularly in 3.1 and 5.1 variants.

Do you need a subwoofer with bookshelf speakers?

Not all bookshelf speakers are made equal, and the best audio performance may be achieved without a standalone subwoofer with the correct design and high- quality parts. All things considered, many bookshelf speaker systems can perform just well without a subwoofer.

How far should I sit from bookshelf speakers?

As soon as you have a general idea of where you will sit to listen, arrange your speakers such that they make an equilateral triangle with that spot. Divided speakers. For bookshelf speakers, aim for a distance of 4 feet, while for floor-standing speakers, aim for 8 feet.

Why do audiophiles prefer bookshelf speakers?

When you place them on stands far from your walls, their smaller size might make them appear to vanish more than a tower, giving you a fantastic three- dimensional sound stage.

Why are bookshelf speakers so expensive?

A speaker’s price is determined by more than just its electronic parts. The design of the speakers, the materials’ quality, their weight and durability, and even their branding, can make high-end speakers more expensive. Often, individuals underestimate how crucial these factors are.

Can bookshelf speakers sound as good as tower speakers?

Tower speakers are often able to produce deeper, more dramatic bass than isolated bookshelf speakers because of their larger size, which allows them to flow more air through the drivers than desktop or bookshelf speakers. Additionally, towers typically have additional woofer drivers, which produces even more bass.

Are bookshelf speakers good for living room?

When putting up your home audio system and having limited floor space, think about getting a pair of bookshelf speakers. Bookshelf speakers provide powerful amplification and clear, stereo sound for small to medium-sized spaces. They are bigger than portable speakers but more compact than floor speakers.

Should I set bookshelf speakers to small or large?

If there is no subwoofer connected and Audyssey or another auto-calibration program is being used, all speakers should be set to “big,” which the AV receiver will likely do automatically. The lowest bass as well as the rest of the acoustic spectrum will be faithfully reproduced by speakers.

Do bookshelf speakers need to be away from the wall?

Both bookshelf speakers should be placed two to three feet from the back wall for best sound and at an equal distance from the side walls. The ideal listening spot in a room where the sound is most balanced is known as the “Sweet Spot” by audiophiles.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>